Complete your setup
Everything this camera needs, matched by our specialists. Silarius picks first.
Part of Shure's Automatic series of mixers, the Shure SCM810 8-Channel Microphone Mixer provides a feature set and sonic quality suitable for any sound reinforcement scenario. The SCM810 features 8 Mic/Line level inputs via removable Block Connectors. All inputs are balanced and provide phantom power for condenser microphones. There are 8 direct outputs (1 per input channel) for direct routing of incoming signal to recorders monitors etc. Low-cut filter and High-shelving EQ switches are provided on all input channels. In addition to the mixers sonic quality, the SCM810's automatic features offer complete, hands free operation between multiple microphones.
It has 7 position-programmable switches to provide further modifications to internal features; the limiter threshold, off-attenuation level, and hold time can be adjusted, and the mixer can be switched between manual and automatic modes.
The SCM810's Noise Adaptive threshold distinguishes between constant background noise and audio signal fluctuating in pitch, level and consistency (speech). The threshold continuously adjust so that speech levels louder than background noise activate that channel. The Max Bus feature controls the number of channels that activate when triggered by a signal. The Max Bus feature can be set so that one talker activates one channel, even if multiple microphones "hear" that talker. This results in a constant switching between talkers on a panel or discussion. Last Mic Lock-On feature keeps the most recently used mic active so that ambient room signal remains when mics are not in use. The result is a natural uninterrupted signal flow.
Noise Adaptive Threshold
Max Bus
Last Mic lock-On
Removable Block Connectors
Programmable Dip Switches
Microphone Logic Connector
Direct Outputs
Cascadability
| Inputs | 8 - Removable Block Connectors, balanced microphone or line level input |
| Output | 8 - Direct Outputs (ch 1-8) 1/4" Phone jacks |
| Monitor/Headphone Out | 1 - 1/4" TRS Phone jack (Headphone) |
| ALT I/O | 1 - AUX line input 1/4" Phone (front panel) 1 - Microphone Logic connection DB25 male connector |
| Link Input/Output | 2 - Link In / Link Out 1/4" Phone jacks |
| Impedance | Input MIC: Designed for use with 19-600 ohm load, 1.6k ohms actual, -15dBv clipping level LINE: Designed for use with - / < 2k ohm load, 10k ohms actual, +22dBV clipping level AUX: Designed for use with - / < 2k ohm load, 10k ohms actual, +22dBV clipping level SEND/RETURN: Designed for use with - / < 2k ohm load, 10k ohms, +18dBV Output LINE: Designed for use with >600 ohm load, 60 ohms actual, +18dBV clipping level HEADPHONES: Designed for use with 8-200 ohms, 60 ohm recommended, 300 ohms actual, +12dBV clipping level DIRECT OUT: Designed for use with > 2k ohm load, 1k ohms actual, +18dBV clipping level SEND/RETURN: Designed for use with > 2k ohm load, 1k ohms actual, +18dBV clipping level |
| Gain | Low-impedance mic (150 ohms)Input: Line 80dB, Headphones 88dB, Direct Out 34dB - Outputs Line Input: Line 40dB, Headphones 48dB, Direct Out -6dB - Outputs Aux Input: Line 44dB, Headphones 52dB, - Outputs Send/Return Input: Line 20dB, Headphones 28dB - Outputs |
| Hum & Noise | Equivalent Input Noise: -125dBV (150 ohm source; through 400Hz - 20kHz filter) Equivalent Input Hum and Noise: -123 dBV (150 ohm source; through 20Hz - 20kHz filter) Output Hum and Noise: Master full counterclockwise -90dBV, Master full clockwise -70dBV (through 20Hz to 20kHz filter; channel controls full clockwise) |
| Frequency Response | 50Hz to 20kHz +/- 2dB; -3dB corner at 25 Hz (Ref 1 kHz, channel controls centered) |
| Distortion | <0.1% at +18 dBV output level, 50Hz to 20kHz |
| Metering | 4 segment LED's |
| Controls | Sealed Rotary Pots: Microphone channels 1-8, AUX input, Headphone and Master gain controls Recessed Rotary Controls: Low Cut Filter and High- Frequency Shelving channels 1-8 Phantom Power Switches located in rear |
| Control Voltage Out | No |
| Phantom Power | 46 Vdc open-circuit through 6.8k ohms series resistance per DIN 45 596 |
| Operating Temperature | Operating: 0 to 60 degrees C (32 to 140 degrees F) Storage: -30 to 70 degrees C (-20 to 165 degrees F) |
| Power | SCM810: 120 Vac rated nominal, 50/60Hz, 200mA SCM810E: 230 Vac rated nominal, 50/60Hz, 100mA |
| Dimensions | 1.75 x 19.13 x 12.4 (44.5 x 483 x 317mm) (H x W x D) |
| Weight | 9.57 lbs (4.3kg) |
| Package Weight | 13.2 lb |
| Box Dimensions (LxWxH) | 21.89 x 16.772 x 2.835" |
Shipping
Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.
Shipping policyReturns
Return within 30 days of delivery. Opened items may carry an open-box fee of up to 30%, set by our QA team on inspection. Return shipping is paid by the customer.
Start a returnDamaged or wrong item?
Tell us within 3 days of delivery with photos and we'll make it right, with no fee.
Contact usShure warranty
This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.
Warranty detailsSupport from real people
Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.
Chat with usBusiness accounts
Approved businesses can pay on Net 30 / PO terms after their second completed order.
Ask about terms
Frequently bought together
Save money buying these products together
