Complete your setup
Everything this camera needs, matched by our specialists. Silarius picks first.
2WAY 8"OUTDR SP WH 70/100V XFORMER W/MNT HARDWARE (White)
Features
- 8” weather treated woofer; 1.4” compression driver
- 105° Axisymmetric (conical) coverage
- 60 watt low-saturation and low-loss 70/100V transformers with 8Ω bypass
- Maximum peak SPL 119 dB (8Ω bypass)
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Optional Yoke mount and M10 Kit-C for additional installation versatility
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, and BIM information available online
Specifications
| System Details | AD-S6T | AD-S8T | AD-S10T |
| Effective frequency range1 | 60 Hz to 20 kHz | 55 Hz to 20 kHz | 50 Hz to 19 kHz |
| Rated noise power / voltage2 | 150 watts / 35 volts (rms) | 200 watts / 40 volts (rms) | 250 watts / 45 volts (rms) |
| Broadband sensitivity3 | 89 dB SPL | 90 dB SPL | 92 dB SPL |
| Coverage angle (-6 dB) | 105° | 105° | 90° |
| Directivity factor (Q) | 5 | 7 | 10 |
| Directivity Index | 7 dB | 9 dB | 10 dB |
| Maximum continuous SPL4 | 110 dB | 113 dB | 116 dB |
| Maximum peak SPL4 | 116 dB | 119 dB | 122 dB |
| Rated impedance | 8 ohms | 8 ohms | 8 ohms |
| Recommended amplifier power (loudspeaker "program" power) | 300 watts | 400 watts | 500 watts |
| Transformer taps | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass | 70 V: 60, 30, 15, 7.5 W and 8Ω bypass | 70 V: 100, 50, 25, 12.5 W and 8Ω bypass |
| 100V: 60, 30, 15 W and 8Ω bypass | 100V: 60, 30, 15 W and 8Ω bypass | 100V: 100, 50, 25 W and 8Ω bypass | |
| HF transducer | 1” silk dome tweeter / 1” voice coil, horn loaded | 1” exit / 1.4” voice coil compression driver | 1” exit / 1.4” voice coil compression driver |
| LF transducer | 6” weather resistant paper cone woofer | 8” weather resistant paper cone woofer | 10” weather resistant paper cone woofer |
| 1.5” / 38 mm voice coil | 2” / 51 mm voice coil | 2.5” / 64 mm voice coil | |
| Input connector type | Euroblock connector with parallel output | Euroblock connector with parallel output terminals | Euroblock connector with parallel output terminals |
| Enclosure material | Painted ABS polymer | Painted ABS polymer | Painted ABS polymer |
| Grille material | Powder coated aluminum | Powder coated aluminum | Powder coated aluminum |
| X-Mount material | Powder coated aluminum | Powder coated aluminum | Powder coated aluminum |
| Enclosure Details | |||
| Ingress protection | IP-54 | IP-54 | IP-54 |
| Operating environment | Designed for indoor and outdoor use | Designed for indoor and outdoor use | Designed for indoor and outdoor use |
| Testing | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: |
| Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | |
| Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | |
| High and low temperature: tested to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | |
| Operating Temperature Range | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F |
| Net weight | 13.6 lb / 6.2 kg | 24.1 lb / 11 kg | 31 lb / 15 kg |
| Product dimensions | 14.4” × 8.5” × 8.5” (365 × 215 × 215 mm) | 17.3” × 10” × 9.9” (440 × 254 × 251 mm) | 20.3” × 12.5” × 11.7” (516 × 318 × 298 mm) |
| Shipping weight | 33.4 lb / 15.2 kg (pair packed) | 32.1 lb / 14.5 kg | 40.6 lb / 18.45 kg |
| Shipping dimensions | 20" × 12” × 23” (510 × 305 × 585 mm) (pair packed) | 24.3 × 13.8” × 13.8” (729 × 351 × 351 mm) | 31.7” × 16.1” × 16.1” (805 × 409 × 409 mm) |
| Included accessories | X-Mount mounting system, euroblock connector, input panel cover |
X-Mount mounting system, euroblock connector, input panel cover | X-Mount mounting system, euroblock connector, Input panel cover |
| Optional accessories | YMS8T yoke mount, M10 Kit-C | YMS10T yoke mount, M10 Kit-C | |
| 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | |
| 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | |
| 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | |
| 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity | |
| As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice. | |||
| System Details | AD-S12 | AD-S112sw |
| Effective frequency range1 | 52 Hz to 20 kHz | 30 to 135 Hz |
| Rated noise power / voltage2 | 300 watts / 50 volts (rms) | 300 watts / 50 volts (rms) |
| Broad-band sensitivity3 | 95 dB SPL | 90 dB SPL |
| Coverage angle (-6 dB) | 75° | |
| Directivity factor (Q) | 12 | |
| Directivity Index | 11 dB | |
| Maximum continuous SPL4 | 120 dB | 115 dB |
| Maximum peak SPL4 | 126 dB | 121 dB |
| Rated impedance | 8 ohms | 8 ohms |
| Recommended amplifier power (loudspeaker "program" power) | 600 watts | 600 watts |
| Transformer taps | n/a | |
| n/a | ||
| HF transducer | 1” exit / 1.4” voice coil compression driver | |
| LF transducer | 12” weather resistant paper cone woofer, 3” / 76 mm voice coil | 12” weather resistant paper cone woofer, 2.5” / 64mm voice coil |
| Input connector type | Euroblock connector with parallel output terminals | Euroblock connector with parallel output |
| Enclosure material | Painted ABS polymer | Painted ABS polymer |
| Grille material | Powder coated aluminum | Powder coated aluminum |
| Yoke material | Powder coated galvanized steel | |
| Enclosure Details | ||
| Ingress protection | IP-54 | IP-54 |
| Operating environment | Designed for indoor and outdoor use | Designed for indoor and outdoor use |
| Testing | The AD Series loudspeakers qualified for outdoor use using the following tests: | The AD Series loudspeakers qualified for outdoor use using the following tests: |
| Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. | |
| Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days | |
| High and low temperature: tested according to QSC internal standards between -20° and 50° C | High and low temperature: tested according to QSC internal standards between -20° and 50° C | |
| Operating Temperature Range | -20 to 50° C / -4 to 122° F | -20 to 50° C / -4 to 122° F |
| Net weight | 35.2 lb / 16 kg | 29 lb / 13.2 kg |
| Product dimensions | 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm) | 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm) |
| Shipping weight | 46.3 lb / 21 kg | 43.1 lb / 19.6 kg |
| Shipping dimensions | 34.5” x 17.9” x 17.2” (765 x 455 x 437 mm) | 27.5” x 21.75” x 18.5” (698 x 552 x 470 mm) |
| Included accessories | X-Mount mounting system, euroblock connector, Input panel cover | Yoke mounting system, euroblock connector, input panel cover |
| Optional accessories | YMS12 yoke mount, M10 Kit-C | |
| 1 Free-field, -10 dB from on-axis sensitivity | 1 Free-field, -10 dB from on-axis sensitivity | |
| 2 IEC60268-1 noise signal for 2 hours | 2 IEC60268-1 noise signal for 2 hours | |
| 3 On-Axis, free-field sensitivity, 2.83V, 1 m | 3 On-Axis, free-field sensitivity, 2.83V, 1 m | |
| 4 Calculated from rated noise voltage and sensitivity | 4 Calculated from rated noise voltage and sensitivity |
Shipping
Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.
Shipping policyReturns
Return within 30 days of delivery. Opened items may carry an open-box fee of up to 30%, set by our QA team on inspection. Return shipping is paid by the customer.
Start a returnDamaged or wrong item?
Tell us within 3 days of delivery with photos and we'll make it right, with no fee.
Contact usQSC warranty
This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.
Warranty detailsSupport from real people
Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.
Chat with usBusiness accounts
Approved businesses can pay on Net 30 / PO terms after their second completed order.
Ask about terms
Frequently bought together
Save money buying these products together
Total price:
$800.00
