Honeywell Fire HPFF12 12A NAC Power Supply, 24VDC Output, 120VAC, 60Hz Input

The Honeywell HPFF12(E) and HPFF12CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone. They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output. The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even in alarm, and therefore must be taken into account for power supply loading and battery size calculations).

The combined output cannot exceed 12.0 amps. The HPFF12 and HPFF12CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory feature that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built in for five appliance brands. The HPFF12 and HPFF12CM have two fully independent supervised initiating circuits that can be used for synchronized strobes and coded horns. Their NAC outputs may be configured as any of the following:

The Honeywell HPFF12 and HPFF12CM are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or stand alone.

HPFF12: 12.0A fire rated power supply. Unit includes red enclosure, battery cable and installation instructions. 120VAC/ 60Hz.

Main Features

• Primary Input Power: 120VAC, 60Hz, 5.4A standard; 240VAC, 50Hz, 3.2A on units with E suffix.
• Secondary Power: 24 volt operation: two 7-24 AH batteries.
• Battery Charging Capacity: Up to 26 AH batteries.
• HPFF12 Cabinet: Holds up to two 18AH batteries.
• HPFF12CM: Holds up to two 12AH batteries.
• Total Output Current: 12.0A max.
• Standby Current: 0.075 A.
• Auxiliary Power Output: 2.0A under all conditions.
• NAC Output Ratings: 24VDC fully regulated, 3.0A max per circuit (12.0A total).
• End-of-Line Resistor Range: 1.9K to 25k ohm, ½ watt. Product ships with 4 separate programming resistors. They are 3.9K (5 each - only need one for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each)
• Common Trouble: 2.0A at 30VDC.
• Relay Fail Relay: 2.0A at 30VDC.
• Input Control Circuits: compatible with 12 and 24 VDC control panel NACs.
• Input Control Current (alarm): 5.68 mA @ 12 VDC, 12.28 mA @ 24 VDC.
• Temperature Rating: 32°F to 120°F (0°C to 49°C).
• Relative Humidity: 10% to 93% non-condensing.
• Cabinet Dimensions:HPFF12 Cabinet: 16.65" W x 19.0" H x 5.2" D (42.29 W x 48.26 H 13.23 D cm) Large equipment enclosure (EQBB-D4): 24" W x 45.9" H x 5.15" D (60.96 W x 116.52 H x 13.1D cm)