Complete your setup
Everything this camera needs, matched by our specialists. Silarius picks first.
Product Overview
The AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation. The unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4? or 8? load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V/100V for a paging/background system on a single channel plus two additional 4?/8? amplifier channels for foreground stereo applications. The DPA1202 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 4-channel Dante™ receiver card or a DPA-AMIX (2) mic / line, (2) AUX input card, giving the DPA1202 a total of 8 inputs. All inputs can be mixed and routed to any of the four amplifier channels. All four amplifier channels have an assortment of DSP tools including level controls, EQ's, limiters, high & low pass filters, and delay to provide flexibility for a range of applications. Features Configurable for Use as 2-Channel 70.7V Amplifier Configurable for Use as 4-Channel 4Ω Amplifier Configurable for Use as Single Channel 70.7V and 2-Channel 4Ω Amplifier Networkable with On Board GUI Configurable DSP Via GUI Site Manager Software with Network Auto-Discovery Fault Reporting, Input & Output Status, Standby Status and Remote Activation via a Scheduler Timer User Page with Assignable Input & Output Level Control Mute Assignments Triggered Via Audio Signal or Contact Closure Audio Sense Turn-On/Off Four Balanced Inputs Optional Accessory Card Slot for 4-Channel Dante™ Receiver Card or (2) Mic / Line, (2) Aux Input Card PC, iOS, & Android Compatible The output level can be assigned to either the front panel potentiometers or to the on board GUI. Wired remote level control can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet or mobile device using a web browser. All settings can be password protected. The unit also includes a PC based site manager software that automatically searches within a specific network for all DPA amplifiers on the network. It will list them and allow a single click access to any unit. The DPA Site Manager software can do a variety of functions besides locating IP addresses such as; fault reporting, input & output status, standby status and remote activation via a scheduler timer. The flexibility of the DPA Series amplifiers and comprehensive assortment of local or network control configurations make them an ideal choice in today's sophisticated commercial audio market.
Main Features
- Helps maintain the signal's strength
- Listen to deep lows and extreme highs at 20 Hz - 20 kHz frequency
- The sound moves around at 4 Ohm impedance - a joyful journey to audio pitching and loudness, both
- The 4 audio channels on 1200 W RMS output power significantly enhance the audio's sound quality
- Configurable DSP Via GUI
- Site Manager Software with Network Auto-Discovery Fault Reporting, Input & Output Status, Standby Status and Remote Activation via a Scheduler Timer
- User Page with Assignable Input & Output Level Control
- Mute Assignments Triggered Via Audio Signal or Contact Closure
- Audio Sense Turn-On/Off
- Four Balanced Inputs
General Information
Name: AtlasIED DPA1202 Channel1200W Networkable Multi-Channel Power Amplifier with Optional Dante Network Audio
Category: AtlasIED, Pro AV, Commercial Audio, Pro Amplifiers
UPC Code: 612079190690
Country of Origin: China. Country of origin is subject to change.
Shipping
Free US shipping on orders over $200. Orders under $200 ship at the rate shown at checkout. Oversized items ship by freight; we confirm the quote with you first.
Shipping policyReturns
Return within 30 days of delivery. Opened items may carry an open-box fee of up to 30%, set by our QA team on inspection. Return shipping is paid by the customer.
Start a returnDamaged or wrong item?
Tell us within 3 days of delivery with photos and we'll make it right, with no fee.
Contact usAtlas Sound warranty
This product is covered by the manufacturer's warranty. We help you with the claim from start to finish.
Warranty detailsSupport from real people
Setup questions, compatibility, firmware: chat with a specialist or email info@silarius.com, Monday to Friday, 8am to 4pm ET.
Chat with usBusiness accounts
Approved businesses can pay on Net 30 / PO terms after their second completed order.
Ask about terms
Frequently bought together
Save money buying these products together
Total price:
$1,757.81
