Atlas™ FAP62T-UL2043 6" Coaxial Speaker System with 70.7/100V-32W Transformer and 8Ω Bypass (Pair | White)

$290.98

Atlas™ 6" Coaxial Speaker System with 70.7/100V-32W Transformer and 8Ω Bypass (Pair | White)

The 6” coaxial speaker from Atlas™ sets the bar high with this 70V/8Ω capabilities, the pre installed back can, and its ease of installation. If you’re looking for superior performance in an in-ceiling speaker, look no further. The FAP62T-UL2043 is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

The Best of the Best

The quality and features of Atlas speakers are impeccable. Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintain low frequency response while providing increased output for higher SPL applications. Atlas makes it easy with a front mounted tap selector switch for system tuning adjustments. This includes a transformer bypass setting for 8 ohm direct coupled operation.

Efficient Back-can System

Get a more powerful sound and extended low frequency response from the 285 cubic inch, optimally tuned and ported deep drawn galvanized steel enclosure.

Easy Access, Easy Runs

The 4 pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional Strategy™ full range speakers or subwoofers. Its unique "trap door" input section allows for through conduit runs with rigid or flex conduit.

70 Volt  

This speaker runs off a 70V amplifier. The 70V capability gives you many benefits including a larger listening area, speakers can be daisy chained together, and it allows for single speaker wattage control.

Powerful 6” Woofer

The Atlas 6” Coaxial Speaker isn’t your run-of-the-mill 70V speaker. This speaker can get loud!  With the mounted back-can, superior ventilation, and coaxial speaker system, this speaker pumps out clean, powerful sound. This will allow for fewer speakers in a specific area saving you money.

Loop for Jack Chain (Chain Sold Separately)

On the back of the speaker there is a small loop for a jack chain. This is important when mounting this speaker because if there is a shift in the ceiling tiles for any reason, the speaker will not fall.

Simplified Installation

Atlas makes it simple to install all of their speakers. Included with this speaker is a C-ring/V-rail tile bridge and their "dog leg" mounting system.

 

Speaker Type Coaxial
Power Taps 2,4,8,16,32 Watts & 8Ω
Frequency Response 63Hz-20kHz
Dispersion 110°
Sensitivity 88dB Average
Depth 8 1/2" (21.5392 cm)
Diameter 12 1/2" (31.75 cm)
Shipping Weight 15.50 lbs (7.03 kgs)
Certified to Safety Listing UL 1480
Quantity: 2

You may also like

Recently viewed