ZXI 5x7" 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm

$119.95

DS18 ZXI-574 Glass Fiber Cone 5x7" 2-Way Coaxial Car Speaker 210 Watts 4-Ohm

DS18's ZXI line is both highly innovative and intuitive making it a very versatile audio line that will bring you loud and clear music on demand. This 2 - way 5x7" takes 70w RMS and 210w Max watts and with a 91dB sensitivity rating, you don't need a lot of power to bring these very loud speakers to extremely high volumes. These speakers are an amazing choice for your average every day to extreme audiophile!

Highlights

  • Highly durable and extremely loud design built for the average to extreme audio systems.
  • Glass fiber cone helps give higher sensitivity and produce overall more sound when on lower power.
  • 2 - way design will bring a full range of frequencies to your ears and with great sound quality.
2-way coaxial speakers with kevlar cone2-way coaxial speakers with kevlar cone2-way coaxial speakers with kevlar cone2-way coaxial speakers with kevlar cone
Technical Details
Nominal Diameter 5x7”
Nominal Impedance 4 ohms
RMS Power Handling 70 Watts
MAX Power Handling 210 Watts
Sensitivity (1w/1m) 91dB
Frequency Response 40Hz-20KHz
Recommended HI Pass Crossover 60Hz
Speaker Type 2-Way
MOTOR
Voice Coil Diameter 1” / 25.5mm
Voice Coil Former Material KSV
Winding Material EISV
Cone Material Glass fiber
Surround Material Rubber
Basket Material Steel
Magnet Material Barium Ferrite
Magnet Weight 14.46 oz / 410g
TWEETER
Nominal Diameter 1" / 25.4mm
Voice Coil Diameter 0.8"/ ø20.4mm
Voice Coil Former Material KSV
Winding Material EISVM
Diaphragm Material PEI
Magnet Material Neodymium
Magnet Weight 0.3 oz / 8.5g
THIELE & SMALL PARAMETERS
Equivalent Volume 8.6L
Excursion (one way) 2.7mm
Free Air Resonance 68Hz
Mechanical Factor 7.04
Electrical Factor 1.28
Total Factor 1.08
Mechanical Mass 16.1g
Mechanical Compliance 258.7mm/N
BL Factor 4.6
Voice Coil Inductance 228mH
Cone Area 153.5cm2
DC Resistance 3.5 ohm
Mechanical Mass w/o air 14g
MEASUREMENTS
Overall Diameter 5.55x7.60” / 141x193mm
Overall Depth 3.07" / 78mm
Front Mount Baffle Cutout 4.92x7.07”/ 125x179.5mm
Mouting Depth 2.22” / 56.5mm
Motor Diameter 3.70” / 94mm

Frequently Asked Questions

What is the power handling on the ZXI 5x7 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm?+
The ZXI 5x7 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm by DS18 is rated for high-output mobile audio. Check the product specs for RMS and peak power handling to match with your amplifier.
Is the ZXI 5x7 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm waterproof or weather resistant?+
Marine and outdoor-rated speakers feature UV-resistant grilles and weatherproof cones. Confirm the IPX rating in the specs for exposed installations.
What cutout size does the ZXI 5x7 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm require?+
Cutout dimensions vary by model. Use the included installation template or product spec sheet before cutting. Professional installation is recommended.
Can I run the ZXI 5x7 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm off a factory head unit?+
Factory head units typically output 15–18W RMS per channel. For best performance, pair these speakers with an amplifier matched to their RMS rating.
What warranty does Silarius offer on the ZXI 5x7 2-Way Coaxial Speakers with Kevlar Cone | 70 Watts Rms 4-Ohm?+
Contact our support team at silarius.com for warranty information, returns, and technical assistance on DS18 products.

You may also like

Recently viewed