Silarius SIL-A4POE1G65 6 Ports POE+ switch with 4 Gigabit Ports PoE+, 2 Gigabit Uplinks, and VLAN config - 65W POE+




The SIL-A4POE1G65, is a 6-port Gigabit PoE+ Switch, offering 4 x 10/100/1000BASE-T PoE ports with 2 x 1000BASE-T Ethernet uplink ports. It supports DIP Switch mode with Vlan features and video data extend max 250m, full compliant working with PoE (802.3af) and PoE+ (802.3at) devices with a 65W PoE budget, delivering data and power over existing Ethernet cables to PoE devices such as Access points, VoIP phones, and IP Cameras.
Unique ground potentials protection, integrated with step power-link management, it enables the PoE Port Priority, to ensure powering the critical PD devices, making this PoE switch a very good choice for IP cameras, wireless AP, VoIP users.
Plug and play this sturdy metal switch for reliable high speed PoE networking, Its fanless design is perfect for quiet environments that require silent operation.


 4 ports Gigabit PoE with 2 Gigabit Ethernet Uplink port

 65W PoE Power Budget

 Step power-link management to make PoE switch working stable

 Automatic defect the stuck IP Cameras and Reboot IPC (other PDs)

 Support short-circuit protection and Over-current protection

 PoE Port Priority to protect switches in over-loading status

 Support DIP mode in Switch, Normal, Vlan and Video Extend: Switch mode, It can be used as normal Switch features. Vlan mode, Isolate each poe port 1-4, effectively improve network performance Video Extend mode, data & power distance up to Max 250m

Specs :

Switch Name : 6-Port Gigabit Ethernet PoE+ Switch
Model No. SIL-A4POE1G65
IEEE802.3i 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 100BASE-T
IEEE802.3x Flow Control
IEEE802.3az EEE
IEEE802.3af Power over Ethernet
IEEE802.3at Power over Ethernet
Port Interface
1-4 port: 10/100/1000Mbps PoE+ Port
5-6 port: 1000Mbps Gigabit Ethernet
PoE Power Budget
65 Watt Switching Bandwidth
12 Gbps
Forwarding rate
7.44 Mpps (64-byte packet size)
Jumbo Frame
9K bytes
MAC Address Table
4k entries
IEEE802.3x full-duplex flow control and Backpressure half-duplex
LED Indicators
Power (power indicator)
Link/Act (link/activity indicator)
Special Features:

Step Power-link Management Metal enclosure with Fanless design Ground potentials Protection design
Power Supply
AC100~240V, 50/60Hz
UTP cat 5 or above
3 Years
Net Weight
0.853 kg
118mm(L) * 85mm(W) * 28mm(H)
Environment specification
Operating temperature: -10℃~45℃,
Operating humidity: 10%~90%
Storage temperature: -20℃~70℃,
Storage humidity: 5%~95%



You may also like

Recently viewed