Electro-Voice F.01U.117.587 EVIDC8.2 8in 2-Way Coaxial Ceiling Loudspeaker System

$327.99

ELECTRO-VOICE F.01U.117.587

The Electro-Voice ® EVID C8.2 loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID C8.2 loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2 utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated, heavy gauge steel. The rear enclosure, with fiberglass damping material, provides an optimum internal volume for extended low-frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2 ceiling systems in a drop ceiling that uses mineral wool, or other fiber-based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
Freq. Response (-10 dB): 50 Hz - 20 kHz
Coverage (Conical): 110°
Power Handling: 100 W Cont. / 400 W Peak
Sensitivity (SPL 1W/1m): 91 dB
Max Calculated SPL: 117 dB
Impedance: 8 Ohms nominal (transformer bypass)
Network: Network and transducers protected, 12 dB/oct 2.6 kHz
LF Transducer: 8 in. (200 mm) Polypropylene cone
HF Transducer: 1 in (25 mm) Ti Mylar laminate
Transformer Taps: 70V: 1.88, 3.75, 7.5, 15 or 30W
100V: 3.75, 7.5, 15 or 30W
Bypass: 8 Ohms
Connectors: Phoenix type removable, with screw terminals and "loop-thru", accepts 12ga wire
Enclosure Material: Baffle- UL 94V-O rated ABS Backcan-Zinc plated steel
Grille: Perforated powder coated steel with safety tether
Support Hardware: Tile bridge, backing plate support, cutout template, paint shield
Dim (H x Dia.): 10.0" x 10.6" (255mm x 270mm)
Cutout Size: 10.8" (274mm)
Net Weight (each): 11.0 lbs (5.0 kg)
Shipping Weight (pair): 24.0 lbs (11.0 kg) 

You may also like

Recently viewed