Product Overview With an open-architecture, all-in-one design, the ControlSpace EX440C conferencing processor facilitates high-quality microphone integration and audio processing for small- to medium-size conference rooms. Various inputs and outputs allow for flexible configuration: four mic/line analog inputs, four analog outputs, onboard VoIP, PSTN, USB, Bose AmpLink output, eight-channel acoustic echo cancelling (AEC), and 16 x 16 Dante® connectivity. ControlSpace Designer software simplifies the setup process with drag-and-drop programming, making configuration quick and easy.
Key Features All-in-one design supports simultaneous VoIP, PSTN, and USB soft codecs in a single, 1RU model 8-channel advanced AEC with multiple references, routable to both analog and Dante inputs Adaptable noise cancellation on each AEC channel; non-linear processing and comfort noise to enhance the clarity and intelligibility of meetings Single-line VoIP with an internal web interface, allowing IT personnel to configure VoIP parameters without design file access or integrator involvement PSTN connection (RJ-11) for worldwide POTS/analog telephone systems USB connection facilitates easy integration with all soft codecs Dante audio networking includes 16 x 16 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones and amplifiers Bose AmpLink port provides 4 channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers GPI and Serial for external connections, such as fire alarm triggers and interfacing with control systems Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity.
Technical Specifications INTEGRATED DSP Signal Processor/CPU 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz Maximum Calculation 3.6 GIPS / 2.7 GFLOPS Delay 43 s Audio Latency 1.05 ms (analog in to analog out, without AEC) A/D and D/A Converters 24-bit Sample Rate 48 kHz ANALOG AUDIO INPUTS Input Channels 4 balanced, mic/line level Connectors, Input 3.81 mm detachable Euroblock, 6-pin Input Impedance 12 kΩ @ 1 kHz (with or without phantom power active) Maximum Input Level +24 dBu Equivalent Input Noise -118 dB at 44 dB gain setting Phantom Power +48 VDC, 10 mA, software selectable per input Gain Settings 0 / +14 / +24 / +32 / +44 / +54 / +64 dB ANALOG AUDIO OUTPUTS Output Channels 4 balanced, line level Connectors 3.81 mm Euroblock, 6-pin Output Impedance 200 Ω Maximum Output Level +24 dBu AUDIO PERFORMANCE SPECIFICATIONS Frequency Response 18 Hz to 20 kHz (+0.8 dB/-0.2 dB ref 1 kHz) THD+N < 0.003% @ +4 dBu (A-weighted/20 Hz to 18 kHz) < 0.01% @ +44 dBu (A-weighted/20 Hz to 18 kHz) Channel Separation (Crosstalk) < -105 dB at +4 dBu 1 kHz input signal Dynamic Range > 115 dB, A-weighted 20 Hz – 18 kHz, analog input to analog output ACOUSTIC ECHO CANCELLING Tail Length 480 ms Noise Reduction 32 dB Latency 50 ms Channels 8 References 4 AUDIO OVER IP Dante 16 × 16, primary/secondary, routable to AEC DIGITAL AUDIO OUTPUTS AmpLink (Output only) 4 low latency (< 21µs), 48 kHz. Requires shielded Cat 5/6 COMMUNICATION PORTS USB Device Micro-B type, stereo in/out, HID Support VoIP RJ-45; 1 line PSTN RJ-11; 1 line, Tx/Rx CONTROL INPUTS Inputs (Control) 1 analog or digital input, 2 kΩ internal pull-up resistor to 5 V, 3.81 mm detachable Euroblock, 2-pin Analog Input Voltage Range 0 V to 3.3 V (maximum 5 V) Digital Input Voltage Range 0 V to 3.3 V (threshold voltage = 1.6 V)
INDICATORS AND CONTROLS Display 256 x 64 OLED with rotary encoder LED Status Indicators Power/Status Audio Signal Indication On Display ELECTRICAL SPECIFICATIONS Mains Voltage 85 VAC-264 VAC 50/60 Hz AC Power Consumption 35 W typical at 40 °C (104 °F) ambient Mains Connector IEC 60320-C14 (Inlet) Power Dissipation 60 W (205 BTU, 52 kcal) PHYSICAL Dimensions (H × W × D) 44 × 483 × 282 mm (1.7 × 19.0 × 11.1 in) Net Weight 3.2 kg (7.1 lb) Operating Temperature 0°C - 40°C (32°F - 104°F) Cooling System 2 variable-speed fans, side venting GENERAL PC Configuration Software ControlSpace Designer software version 5.5 or later Network Control Ethernet (RJ-45), 1 Gbps RS-232/485 ports RS-232 (DTE) 3.81 mm detachable Euroblock, 3-pin COMPLIANCE Safety UL60065 (8th edition), CAN/CSA-C22.2 No.60065 (8th edition), IEC/EN60065 (8th edition) UL62368-1 (2nd edition), CAN/CSA-C22.2 No. 62368-1-14 (2nd edition), IEC/EN 62368-1 (2nd edition) EMC EN 55032:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55035:2017 FCC Part 15B Class A, AS/NZS CISPR 32:2015, ICES-003 Class A, CISPR13 TELECOM Country Standard Australia AS/ACIF S002: 2010+Amendment 2012 NO.1 (2015) (only reports) Canada CS-03 Part I, Issue 9, Amendment 5, March 2016 EEA ETSI ES 203 021-1 V2.1.1 (2005-08), 203 021-2 V2.1.2 (2006-01), 203 021-3 V2.1.2 (2006-01) China CCC: GB/T9254-2008; GB9254-1998; GB9254-2008; GB4943.1-2011; YD/T993-1998 (certification pending) China NAL: GB/T 15279-2002; YD/T 992-1998; YD/T 993-1998; YD/T 965-1998; YD/T 968-2002 (certification pending) Hong Kong HKTA 2011 ISSUE 6 MAY 2010 India TEC: TEC-IR-TX-PST-01-02-MAR-15 (certification pending) Japan JATE, Ordinance concerning terminal facilities etc., MIC Notices NO. 99 Mexico NOM-196-SCFI-2016 (IFT-004-2016) New Zealand PTC200-May 2006, PTC220-May 2008 UAE TRA USA FCC Part68 Taiwan NCC: PSTN01, EMI CNS13438, Safety: CNS14336
