Atlas™ FAP33T-W Revolutionary Fast-Install 3in Full Range Loudspeaker System w/70.7/100V-16W Transformer and 6Ω Bypass (Pair | White)


Atlas™ FAP33T-W Revolutionary Fast-Install 3in Full Range Loudspeaker System w/70.7/100V-16W Transformer and 6Ω Bypass (Pair | White)

Experience outstanding performance! The AtlasIED FAP33T Strategy III is a 3” full range loudspeaker with next generation install technology. These are the speakers of the future. With this designed you don't even need a drill, they pop in place to offer a brand new no-mess install. Packed with new performance innovations at an affordable price point for every style of installation applications, this in-ceiling loudspeaker has excellent speech intelligibility, crisp music reproduction, quick installation, and wide audience coverage.


Crafted with Care

Three years of development has produced the most innovative, easily installed, and safety-secure ceiling loudspeakers in the professional audio market. Patented Safety First Mounting System protects from over-torquing the mounting doglegs during installation and potentially cracking or breaking the mounting system. The results are NO install tools required, NO over-torqued doglegs, NO rusted screws and QUICK installation.


Dynamic Design

This loudspeaker is factory assembled in an optimally tuned and ported deep drawn enclosure and includes a specially designed 16-watt low saturation 70.7V / 100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the loudspeaker from the ceiling. This switch also includes a transformer bypass setting for 8Ω direct coupled operation.


Superb Sound

The FAP33T-W’s 135° dispersion angle can reduce the number of loudspeakers necessary to achieve coverage in distributed systems with low ceilings. High quality construction 3" coaxial cone type driver includes a 20mm voice coil and high efficiency composite cone with polymer coated cloth surround. A high sensitivity of 89.7dB average means less power may be required to achieve the desired SPL.


Atlas Sound

Atlas Sound and Innovative Electronic Designs (IED) have been providing communication solutions to the world collectively for over 120 years. Atlas Sound and IED have been sister companies since 2009, operating independently but with combined oversight at the executive management level. In 2015 Atlas Sound and IED have combined their sales, marketing, and support teams to better serve their combined customers and the various market segments they serve.


SFMS-Safety First Mounting System Patented  
4 Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining of Additional Speakers  
Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss  
Increased Dispersion with Improved Waveguide  
Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes transformer Bypass Setting for Direct Coupled Operation  
“Press Fit” Grilles Blend Better into Contemporary Architecture  
Unique “Trap Door” Input Section Allows for through Conduit Runs with Rigid or Flex Conduit  
Speaker Type Full Range
Power Taps 2, 4, 8, 16 Watts & 6Ω
Frequency Response 85Hz-12kHz
Sensitivity 89.7dB (1W/1m)
Dispersion 135°
Certified to Safety Listing UL1480 & UL2043
Type Two Way, Full Range, Coaxial Ceiling Loudspeaker
Operation Mode Non-Powered Passive
Operating range (-10dB) 60Hz
Frequency Response(+/- 5dB) 85Hz - 12kHz (±3 dB)
Vertical Coverage 135º 800Hz - 4kHz
Horizontal Coverage 135º 800Hz - 4kHz
Max Input ratings(8Ω) 25W Continuous, 50W Program 12.5 Volts RMS, 21.2 Volts Momentary Peak
Transformer Taps-70V 32W, 16W, 8W, 4W and Low Impedance (8Ω)
Transformer Taps-100V 32W, 16W, 8W
Directivity Factor (Q) 13.98 @ 2kHz
Directivity Factor (DI) 11.45 @ 2kHz
Input Sensitivity at 1W/1m 89.7 dB
Max SPL at 1 m (Passive) 104 dB Continuous / 108 dB Peak
Recommended Signal Processing 90Hz High Pass Filter
Recommended Power Amplification 120W at 8Ω
LF Transducer Qty and Size 1 x 3”
LF Voice Coil Size 20mm
HF Transducer Qty and Size N/A
Max output 104 dB SPL / 108 dB SPL (Peak 8Ω)
Nominal Impedance
Minimum Impedance 5.2Ω @ 600Hz
Crossover frequency N/A
Color White (RAL 9016)
Enclosure Material Powder Painted CRS
Grille Material Powder Coated CRS, White Finish (RAL9016), Paintable
Baffle Material UL94V-0 PC
Mount Material Zinc Plated CRS
Input Connection 4-Position PHX Type Connector
Controls Front-Face Power Taps / Low Impedance Selector Switch
Mounting/Rigging Provisions Patented Safety First Mounting System
Safety Features 1 Safety Hang Point
Safety Agency Ratings UL Listed to Comply with UL1480, UL2043 and CSA60065. Suitable for Use in Air Handling Spaces per NFPA 70 and NFPA 90.
Ingress Protection IP-21
Environmental Testing Humidity: MIL-STD-810G / High and Low Temperature: -20° and 70° C
Cutout Diameter 7.652" (193.7 mm)
Logo White Removable
Product Dimensions (HxWxD) 8.78" (223 mm) x 8.78" (223 mm) x 5.39" (136.9 mm)
Shipping Dimensions (HxWxD) 12.9" (328 mm) x 28" (711 mm) x 10.55" (268 mm)
Net Weight Unit w/ C-Ring = 4.14 lbs (1.88 kg) 2V-rails = 2.1 lbs (.95 kg)
Shipping Weight 18.12 lbs (8.22 kg) Shipped in Pairs
Warranty Coverage  
Warranty Period 5 Years
Quantity: 2

You may also like

Recently viewed