Viking E-1600-50-IPEWP Emergency Phone Parts Kit With Enhanced Weather Protection

1,754.00 SR
  • Automatic polling and programming software included
  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
  • Red "Call Connected" LED indicator

The E-1600-50-IPEWP ADA and CE Compliant VoIP Emergency Phone Parts Kit is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-50-IPEWP is designed to be installed behind a custom panel, meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The phones can dial up to 5 programmable emergency numbers.

The E-1600-50-IPEWP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.

The E-1600-50-IPEWP isequipped with Enhanced Weather Protection (EWP), ideal for outdoor installations where the unit is exposed to precipitation or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information on EWP, see DOD 859.

  • Automatic polling and programming software included
  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
  • Red “Call Connected” LED indicator
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
  • VoIP audio detection eliminates the need for “Push to Talk” mode
  • Network downloadable firmware
  • Handsfree operation
  • Meets ADA requirements for Emergency Phones:
    • Automatically lights the “Call Connected” LED
    • Transmits a unique location ID code or voice announcement
    • Grade 2 Braille label for the visually impaired
  • Non-volatile digital voice announcer with 28 seconds of voice memory
  • Programmable to dial up to 5 numbers
  • Cycles through backup phone numbers on busy or ring-no-answer
  • Hangs up on busy signal, time-out or touch tone command
  • Remotely programmable
  • Diagnostics for testing mic, speaker, relay
  • Extended temperature range: -40°F to 140°F (-40°C to 60°C)
  • Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Main Features
  • Automatic polling and programming software included
  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)
  • Red "Call Connected" LED indicator
  • SIP compliant
  • PoE powered (class 1, <4 Watts)
  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
  • VoIP audio detection eliminates the need for "Push to Talk" mode
  • Network downloadable firmware
  • Handsfree operation
  • Meets ADA requirements for Emergency Phones:
.

You may also like

Recently viewed