The E-10-IP-EWP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-10-IP-EWP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The E-10-IP-EWP can dial up to 5 programmable numbers.
The E-10-IP-EWP door entry phone will flash the "Call" LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.
- 2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- Handsfree operation
- T-10 Torx security screws for added security
- Laser etched graphics
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Programming software included
- Network downloadable firmware
- Remotely programmable
- Diagnostics for testing mic, speaker, and relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
- Flush mount using the included rough-in box or surface mount using a VE-5×5 Surface Mount Box (DOD 424)
