Outdoor AP Description
The Multi-band gigabit high-density outdoor wireless access point (Model SILOUTAP1G128) is a 802.11ac wireless access point independently developed by Silarius. The SILOUTAP1G128 supports IEEE 802.11a/b/g/n/ac protocol, provides 4 spatial streams and 2 independent channels, greatly increases the number of bands and concurrent traffic, adopts 1G Gigabit Ethernet port uplink, breaking through the limitation of 100M uplink rate, ensuring wireless high-speed transmission, the maximum wireless access rate reaches up to 1.167Gbps, which fully satisfy the requirements of outdoor squares, long-distance wireless coverage in stadiums, scenic spots, parks, and playgrounds, etc. The SILOUTAP1G128 enclosure meets IP67 anti-dust and waterproof, which applicant for various harsh environments, the PoE power supply solution can solve the problem of difficult power access in outdoor environments and can be flexibly deployed according to needs.
AP Highlights
- The first multi-band Wi-Fi technology
Adopting Silarius's multi-band Wi-Fi frequency division multiplexing technology, single outdoor AP supports 128 terminals to receive 64 terminals concurrently, and the wireless access rate is 1.167Gbps.
-
Dual-band 2 x 2:2 MIMO Technology
Adopt 2.4G and 5G dual radio link design, support four independent spatial streams, increase the number of terminal access four times.
- Unique External PA and LNA design
Adopt 4 sets of external high-performance independent power amplifier circuit (PA) and low-noise power amplifier receiver circuit (LNA) to improve wireless transceiver performance, suitable for outdoor long-distance wireless coverage.
- Gigabit Ethernet Uplink Interface
Adopts Gigabit Ethernet Uplink port, which breaks through the limitation of the 100M speed, just need one network cable for power supply and communication.
-
Equipped with 4 omni-directional high gain antennas
Equipped with two 5dBi(2.4G) and two 5dBi(5G) high-gain omni-directional antennas to fully realize the requirements of outdoor large-scale and long-distance coverage.
- Intelligent load balancing
In the case of high-density wireless users, combined with Silarius AC series products, through intelligent load balancing based on the number of users, traffic, and frequency bands, it improves bandwidth utilization and provides more extreme Internet experience.
- Intelligent RF anti-interference
Automatic adjust the working channel and transmit power of the wireless access point and perform real-time detection of interference from the surrounding environment to reduce wireless interference and improve the overall quality of wireless network.
Support 5G priority algorithm, compatible with multiple devices to replace the 5G high-speed channel simultaneously, maximize the use of 5G transmission high bandwidth.
- Gigabit PoE waterproof Interface
Outdoor AP uplink adopts Gigabit PoE Ethernet waterproof interface, supports remote PoE power supply, makes the outdoor power supply communication more stable.
- Multiple Safe Authentication Methods
Provides a variety of flexible and secure user authentication methods, combined with Silarius AC product series portfolio network deployment to achieve authentication methods such as 802.1x, etc. to satisfy the network deployment in enterprise, schools, shopping malls, and hotels environments.
Compatible Working with Silarius AC products to establish a VPN encrypted channel, users who access the network can directly access the shared resources of the intranet.
- Industrial grade IP67 protection grade
The AP’s enclosure adopts casting aluminum shell material, professional enclosed design waterproof joints, it support dustproof, waterproof and anti-condensing fog, suitable for various outdoor harsh environments, with 6KV lightning protection design, greatly extending the working life of the equipment
AP supports the integration of FAT and FIT and can be flexibly switched at any time according to different networking requirement. Large scale AP will be managed by AC Controller of Silarius product series.
Support English SSID, you can specify an SSID containing up to 32 characters, to provide a personalized SSID for shopping malls or enterprises to improve recognition.
The industry’s first tripod installation method supports customized cantilever bracket ceiling installation to be more reliable.
- Multi-frequency Wireless Mesh networking
Multi-frequency cascading of wireless AP with other Silarius AP series products of wireless AP can achieve flexible, efficient multi-frequency Mesh networking
- Multi-frequency and Multi-channel Seamless Roaming
Compatible with AC product series of Silarius portfolio network deployment, seamless roaming and self-adaptation can be achieved in full Wi-Fi coverage area.
Hardware Spec
|
Model
|
SILOUTAP1G128
|
|
Name
|
Multi-band Outdoor Wireless Access Point
|
|
Antenna
|
4 omni-directional high-gain antenna(5 dBi)
|
|
Ethernet Port
|
1*100/1000Mbps PoE/WAN (waterproof joints)
|
|
RST
|
Support
|
|
Power Supply
|
PoE 802.3at
|
|
Gross Weight
|
5kgs
|
|
Dimension
|
310*255*100mm (Antenna Length: 233mm)
|
|
WTU
|
-10℃～45℃, 10%～90%, Non-condensing
|
|
STU
|
-40℃～70℃, 5%～95%, Non-condensing
|
Software Spec
|
Model
|
SILOUTAP1G128
|
|
Name
|
Multi-band Outdoor Wireless Access Point
|
|
Spatial flow
|
4
|
|
2.4G Channel
|
2
|
|
5G Channel
|
2
|
|
2.4G Transmission Rate (Max)
|
300Mbps
|
|
5G Transmission Rate (Max)
|
867Mbps
|
|
Wi-Fi Access Number (Max)
|
128
|
|
Wi-Fi Concurrent Number
(Recommended)
|
64
|
|
Working Frequency
|
802.11ac/n/a: 5.725GHz-5.850GHz, 5.15~5.25GHz
|
|
802.11b/g/n: 2.4GHz-2.483GHz
|
|
Modulation
Technology
|
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16QAM@24Mbps, 64QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
MIMO-OFDM: MCS 0-31
MIMO-OFDM(11ac): MCS 0-9
|
|
Modulation Way
|
11b:DSS:CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM
11ac:MIMO-OFDM:BPSK,QPSK, 16QAM, 64QAM, 256QAM
|
|
Support Channel
Number
|
802.11a, 802.11n, 802.11ac(Compatible with 802.11a mode): 9 channels
802.11b, 802.11g, 802.11n(Compatible with 802.11b/g mode): 13 channels
|
|
Transmit power
|
2.4G: 20dBm@11b, 1Mbps
2.4G: 18dBm@11n, HT20, MCS7
2.4G: 18dBm@11n, HT40, MCS7
5G: 17dBm@11a, 6Mbps
5G: 14dBm@11n, HT20, MCS7
5G: 14dBm@11n, HT40, MCS7
|
|
Receiving sensitivity
|
2.4G: <-95dBm@11b, 1Mbps
2.4G: <-75dBm@11n, HT20, MCS7
2.4G: <-70dBm@11n, HT40, MCS7
5G: <-90dBm@11a, 6Mbps
5G: <-75dBm@11n, HT20, MCS7
5G: <-70dBm@11n, HT40, MCS7
|
|
Channel Adjustment
|
Support Auto, Manual Adjustment
|
|
Power Adjustment
|
Support
|
|
RF Time Switch
|
Support Turn on/off RF based on Specify Time Period
|
|
Access Limited
|
Support User Restrictions based on SSID
|
|
English SSID
|
Support
|
|
SSID Hidden
|
Support
|
|
Load Balancing
|
Support Intelligent Balance based on users, traffic and Frequency bands
|
|
Bandwidth Limited
|
Support Speed Limit based on STA/SSID/AP
|
|
STA Related
|
Support STA Abnormal Offline Detection, STA Burn-in Testing, STA-based Statistics and Status Query
|
|
Link Integrity Detection
|
Support
|
|
Authentication Method
|
Support Pre-shared Key, 802.1x Authentication
|
|
Pre-shared Key
|
WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK Encryption
|
|
802.1x Authentication
|
Support 802.1x one-key automatic configuration deployment, support 802.1x non-perceptual authentication, download the one-key automatic configuration tool when accessing for the first time to quickly complete wireless network configuration
|
|
Black and White List
|
Support Static Black and White List
|
|
User Isolation
|
Support Isolation between SSIDs, automatic VLAN grouping, user isolation under designated VLAN
|
|
Prevent Terminal
Stickiness
|
Perceive the STA connected to the AP, and Intelligently Guide the STA to Access the best AP
|
|
Prohibit Low rate
Terminal Access
|
Set a Threshold for the Speed of Access Terminals, prohibit weak Signal Terminals below a Certain Speed from Accessing, and Improve the Overall Network Speed
|
|
High-density Access
Scenario Optimization
|
Support Broadcast Probe Request Response Control to Optimize High-density Access Scenarios
|
|
ARP to Unicast
|
Convert ARP Broadcast Messages to Unicast, Reduce Broadcast packets and Increase transmission speed
|
|
FAT and FIT
Integration
|
Support the integration of FAT and FIT, switch flexibly between the two working modes of FAT and FIT.
|
|
Channel Encryption
|
Support
|
|
Access Point VPN
|
Support the encrypted data transmission communication with Silarius AC. Accessing the corporate intranet data resources is transmitted through an encrypted tunnel.
|
DOWNLOAD SPEC HERE
