APC SMT3000C Smart-UPS Battery Backup & Surge Protector with SmartConnect APC SMT3000C Smart-UPS Battery Backup & Surge Protector with SmartConnect
APC SMT3000C Smart-UPS Battery Backup & Surge Protector with SmartConnect
APC SMT3000C Smart-UPS Battery Backup & Surge Protector with SmartConnect

APC SMT3000C Smart-UPS Battery Backup & Surge Protector with SmartConnect

$2,480.00

Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the Smart-UPS Battery Backup & Surge Protector with SmartConnect from APC has a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 563 minutes of use at 50W, 330 minutes of use at 100W, 172 minutes of use at 200W, 112 minutes of use at 300W, 81 minutes of use at 400W, 63 minutes of use at 500W, 51 minutes of use at 600W, 42.2 minutes of use at 700W, 35.7 minutes of use at 800W, 30.6 minutes of use at 900W, 26.7 minutes of use at 1000W, 20.7 minutes of use at 1000W, 17.5 minutes of use at its half load of 1350W, 16.6 minutes of use at 1400W, 13.5 minutes of use at 1600W, 11.2 minutes of use at 1800W, 9.4 minutes of use at 2000W, 6.1 minutes of use at 2500W, and 5.7 minutes of use at its full load of 2700W..

This Smart-UPS features an output of 2700W / 2880 VA, a NEMA L5-30P input connection, an input of 120V @ 50/60 Hz ±3 Hz, eight NEMA 5-15R battery backup outlets, two NEMA 5-20R battery backup outlets, a surge energy rating of 530 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is an RS-232 cable and a USB cable. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

SMT3000C Features
Cold-Start Capable
Provides temporary battery power when the utility power is out.
Energy Meter
Provides actual kilowatt hours of usage for energy conscious users.
Green Mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High Online Efficiency
Reduces utility costs, generates less heat.
LCD Interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.
Predictive Replace Battery Date
Dynamically provides the month and year when battery replacement is recommended to aide in long-term maintenance planning.
Pure Sine Wave Output
Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Sequenced Network Shutdown and Reboot
Customize network shutdown and reboot sequences of connected servers and UPSs.
Single Switched Outlet Group
A single outlet group may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.
SmartSlot
Customize the UPS' capabilities with management cards.
StruxureWare Data Center Expert compatible
Helps enables centralized management via StruxureWare Data Center Expert.
Smart-UPS Features & Benefits
Adaptability
Adjustable Voltage-Transfer Points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable Voltage Sensitivity
Provides the ability to adapt the UPS for improved performance in specific power environments or generator applications.
Safety
Safety-Agency Approved
Helps ensure the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
Serial Connectivity
Provides management of the UPS via a serial port.
USB Connectivity
Provides management of the UPS via a USB port.
Disconnected Battery Notification
Warns when a battery is not available to provide backup power.
Network Manageable
Provides remote power management of the UPS over the network.
Audible Alarms
Actively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition.
LED Status Indicators
Quickly understand the unit and power status with visual indicators.
Serviceability
Battery Failure Notification
Provides early-warning fault analysis on batteries, thus enabling timely preventive maintenance.
User-Replaceable Batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing the Mean Time to Repair (MTTR).
Hot-Swappable Batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Predictive Failure Notification
Provides early-warning fault analysis, helping to ensure proactive component replacement.
Resettable Circuit Breakers
Enables a quick recovery from overload events.
Availability
Intelligent Battery Management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power Conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.
Automatic Self-Test
A periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic Restart of Loads After UPS Shutdown
Automatically starts up the connected equipment upon the return of utility power.
UPC: 731304331063
More information View images

You may also like

Recently viewed