{"title":"RBtec","description":"\u003cp\u003eRBtec focuses on the outer layer of security: detecting an intruder before they reach the building.\u003c\/p\u003e\n\u003cp\u003eThe lineup includes \u003cstrong\u003efence vibration sensors\u003c\/strong\u003e, driveway and gate alarms, and perimeter intrusion detection systems for commercial and residential sites.\u003c\/p\u003e\n\u003cp\u003eTalk to our team for bulk pricing.\u003c\/p\u003e","products":[{"product_id":"rbtec-rb-iroc2z1000-dual-zone-kit-ironclad-sensor-cable-analyzer-nema4x-enclosure-2x1000-600m","title":"RBtec RB-IROC2Z1000 Dual Zone Kit, IRONCLAD Sensor Cable Analyzer NEMA4X Enclosure, 2X1000' (600m)","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-IROC2Z1000 is a complete dual-zone IRONCLAD kit: two 1000-foot runs of armored sensor cable (2000 feet total), an LPU analyzer processor covering both zones independently, and a NEMA 4X \/ IP-66 weatherproof enclosure.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591558759,"sku":"RB-IROC2Z1000","price":8839.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-IROC2Z100.jpg?v=1790813740"},{"product_id":"rbtec-rb-mic2z250-2-zone-micalert-kit-includes-2-rb-mic250-sensor-cable-roll-250-2-rb-rbmctr-end-of-line-termination-board-1-rb-lpu402-analyzer-unit-1-weatherproof-enclosure-for-lpu-402","title":"RBtec RB-MIC2Z250 2-Zone MicAlert Kit, Includes (2) RB-MIC250 Sensor Cable Roll 250', (2) RB-RBMCTR End-of-Line Termination Board, (1) RB-LPU402 Analyzer Unit, (1) Weatherproof Enclosure for LPU-402","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. The RB-MIC2Z250 is a complete two-zone MicAlert kit: two 250-foot rolls of MicAlert sensor cable, two RB-RBMCTR end-of-line termination boards, one RB-LPU402 analyzer unit, and its weatherproof enclosure, covering two independent 250-foot zones.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591591527,"sku":"RB-MIC2Z250","price":3136.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-MIC2Z250.jpg?v=1790813741"},{"product_id":"rbtec-rb-iroc1z1000-single-zone-kit-1000-300m-includes-ironclad-sensor-cable-analyzer-nema4x-enclosure","title":"RBtec RB-IROC1Z1000 Single Zone Kit, 1000' (300m), Includes IRONCLAD Sensor Cable, Analyzer, NEMA4X Enclosure","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-IROC1Z1000 is a complete single-zone IRONCLAD kit: 1000 feet of armored sensor cable, an LPU analyzer processor, and a NEMA 4X \/ IP-66 weatherproof enclosure, sized to cover one zone up to 1000 feet of fence line.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591657063,"sku":"RB-IROC1Z1000","price":5005.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-IROC1Z100_lg.jpg?v=1790813741"},{"product_id":"rbtec-rb-mic500-micalert-indoor-outdoor-sensor-cable-500","title":"RBtec RB-MIC500 MicAlert Indoor Outdoor Sensor Cable, 500'","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. This listing is a 500-foot roll of MicAlert sensor cable without an end-of-line board; pair it with an RBtec LPU analyzer and termination hardware to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591689831,"sku":"RB-MIC500","price":3045.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBMIC500.jpg?v=1790813742"},{"product_id":"rbtec-rb-pds1z500-single-zone-pds-kit-500-processor","title":"RBtec RB-PDS1Z500 Single Zone PDS Kit 500' Processor","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS1Z500 is a complete single-zone PDS kit: 500 feet of alarmed-carrier sensor cable with an LPU-400C analyzer processor, sized to monitor one conduit or cable-tray run up to 500 feet.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591755367,"sku":"RB-PDS1Z500","price":6940.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-PDS1Z500.jpg?v=1790813742"},{"product_id":"rbtec-rb-mic1z500-1-zone-micalert-kit-500-150m","title":"RBtec RB-MIC1Z500 1-Zone MicAlert Kit, 500'\/150m","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. The RB-MIC1Z500 bundles 500 feet of MicAlert sensor cable with an RBtec LPU analyzer processor and termination hardware to cover a single 500-foot zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591788135,"sku":"RB-MIC1Z500","price":3045.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-MIC1Z500.jpg?v=1790813743"},{"product_id":"rbtec-rb-pds500-pds-sensor-cable-500","title":"RBtec RB-PDS500 PDS Sensor Cable, 500'","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. This listing is a 500-foot roll of PDS alarmed-carrier sensor cable without a processor; pair it with an RBtec LPU-400 series analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356591853671,"sku":"RB-PDS500","price":6940.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBPDS500.jpg?v=1790813744"},{"product_id":"rbtec-rb-gateconn-gate-plug-connector-for-disconnection-of-the-sensor-cable-over-gates","title":"RBtec RB-GATECONN Gate Plug Connector for Disconnection of the Sensor Cable Over Gates","description":"\u003cp\u003eThe RB-GATECONN is a gate plug connector for RBtec's IRONCLAD, MicAlert, WallAlert, and PDS sensor cable systems, giving installers a quick-disconnect point so the sensor circuit can be broken and reconnected cleanly where a cable run crosses a gate, rather than splicing the armored cable itself.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593328231,"sku":"RB-GATECONN","price":199.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBGATECON.jpg?v=1790813780"},{"product_id":"rbtec-rb-irocdemo-ironclad-demo-unit","title":"RBtec RB-IROCDEMO IRONCLAD DEMO UNIT","description":"\u003cp\u003eThe RBtec IRONCLAD DEMO UNIT is a portable demonstration kit built around RBtec's IRONCLAD fence sensor cable and LPU analyzer, used by integrators and distributors to show how the cutting, climbing, and lifting detection and its adjustable sensitivity respond in real time before a customer commits to a full fence-length installation.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593393767,"sku":"RB-IROCDEMO","price":2452.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBIROCDEM.jpg?v=1790813780"},{"product_id":"rbtec-rb-elc2zkit-ironclad-complete-processor-kit-for-dual-zones-includes-lpu-304-enclosure","title":"RBtec RB-ELC2ZKIT IRONCLAD Complete Processor Kit for Dual Zones, Includes LPU-304 Enclosure","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-ELC2ZKIT is RBtec's complete dual-zone IRONCLAD processor assembly — an LPU-304 analyzer board and its matching weatherproof enclosure — used to add two-zone monitoring to an existing or replacement IRONCLAD cable run without a new spool of sensor cable.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593426535,"sku":"RB-ELC2ZKIT","price":2389.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-ELC2ZKIT_1.jpg?v=1790813781"},{"product_id":"rbtec-rb-iroc500-perimeter-detection-system-only-a-spool-500-sensor-cable","title":"RBtec RB-IROC500 Perimeter Detection System, ONLY A SPOOL 500 Sensor Cable","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. This listing is a bare 500-foot spool of IRONCLAD armored sensor cable, factory-terminated for a single zone; an RBtec LPU analyzer and weatherproof enclosure are sold separately to complete the zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593492071,"sku":"RB-IROC500","price":3470.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBIROC500.jpg?v=1790813781"},{"product_id":"rbtec-rb-solarkit-perimeter-security-kit","title":"RBtec RB-SOLARKIT Perimeter Security Kit","description":"\u003cp\u003e\u003cem\u003eSpec-only description — RBtec's own catalog and ADI's distributor data give this kit only the name \"Perimeter Security Kit\" with no published bill of materials.\u003c\/em\u003e The RB-SOLARKIT is RBtec's solar-powered perimeter security kit, built for off-grid or remote sites — the kind of solar-farm and substation perimeter RBtec's IRONCLAD and PDS lines are documented to protect — pairing RBtec sensor-cable detection hardware with solar power and battery backup so the zone can run without a mains electrical connection.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593557607,"sku":"RB-SOLARKIT","price":1467.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/2270_LOGO.jpg?v=1790813782"},{"product_id":"rbtec-rb-iroc1000-cable-tie-and-strap","title":"RBtec RB-IROC1000 Cable Tie and Strap","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. This listing is a bare 1000-foot spool of IRONCLAD armored sensor cable, factory-terminated for a single zone; an RBtec LPU analyzer and weatherproof enclosure are sold separately to complete the zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593590375,"sku":"RB-IROC1000","price":5005.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBIROC100.jpg?v=1790813783"},{"product_id":"rbtec-rb-lpu400m2-2-zones-main-board","title":"RBtec RB-LPU400M2 2-Zones Main Board","description":"\u003cp\u003eThe RB-LPU400M2 is the 2-zone main processing board for RBtec's LPU-400 series analyzer, used to replace or rebuild the core processor in an existing dual-zone IRONCLAD, MicAlert, WallAlert, or PDS installation without swapping the full enclosure assembly.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356593655911,"sku":"RB-LPU400M2","price":804.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-LPU400M2.jpg?v=1790813783"},{"product_id":"rbtec-rb-iroc100-ironclad-sensor-cable-100","title":"RBtec RB-IROC100 IRONCLAD Sensor Cable, 100'","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. This listing is a bare 100-foot spool of IRONCLAD armored sensor cable, factory-terminated for a single zone; an RBtec LPU analyzer and weatherproof enclosure are sold separately to complete the zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594376807,"sku":"RB-IROC100","price":517.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBIROC10.jpg?v=1790813817"},{"product_id":"rbtec-rb-pds50-pds-sensor-cable-50","title":"RBtec RB-PDS50 PDS Sensor Cable, 50'","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. This listing is a 50-foot roll of PDS alarmed-carrier sensor cable without a processor; pair it with an RBtec LPU-400 series analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594409575,"sku":"RB-PDS50","price":873.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-PDS50.jpg?v=1790813817"},{"product_id":"rbtec-rb-wall500-wallalert-outdoor-indoor-sensor-cable-without-end-of-line-500-150m-roll","title":"RBtec RB-WALL500 WallAlert Outdoor Indoor Sensor Cable without End-of-Line, 500' (150m) Roll","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. This listing is a 500-foot roll of WallAlert sensor cable without an end-of-line board, meant to be run in conduit against the protected surface and paired with an RBtec LPU analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594475111,"sku":"RB-WALL500","price":3197.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL500.jpg?v=1790813818"},{"product_id":"rbtec-rb-pds250-pds-sensor-cable-250","title":"RBtec RB-PDS250 PDS Sensor Cable, 250'","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. This listing is a 250-foot roll of PDS alarmed-carrier sensor cable without a processor; pair it with an RBtec LPU-400 series analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594507879,"sku":"RB-PDS250","price":5926.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBPDS250.jpg?v=1790813819"},{"product_id":"rbtec-rb-mic250-outdoor-micalert-sensor-cable-no-end-of-line-roll-of-250-75m","title":"RBtec RB-MIC250 Outdoor MicAlert Sensor Cable, No-End of line, Roll of 250'\/75m","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. This listing is a 250-foot roll of MicAlert sensor cable without an end-of-line board; pair it with an RBtec LPU analyzer and termination hardware to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594540647,"sku":"RB-MIC250","price":2588.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBMIC250.jpg?v=1790813818"},{"product_id":"rbtec-rb-pds1z250-pds-alarmed-carrier-sensor-cable","title":"RBtec RB-PDS1Z250 PDS Alarmed Carrier Sensor Cable","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS1Z250 is a complete single-zone PDS kit: 250 feet of alarmed-carrier sensor cable with an LPU-400C analyzer processor, sized to monitor one conduit or cable-tray run up to 250 feet.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594606183,"sku":"RB-PDS1Z250","price":5926.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-PDS1Z250.jpg?v=1790813819"},{"product_id":"rbtec-rb-wall250-wallalert-outdoor-indoor-sensor-cable-without-end-of-line-250-75m-roll","title":"RBtec RB-WALL250 WallAlert Outdoor Indoor Sensor Cable without End-of-Line, 250' (75m) Roll","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. This listing is a 250-foot roll of WallAlert sensor cable without an end-of-line board, meant to be run in conduit against the protected surface and paired with an RBtec LPU analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356594638951,"sku":"RB-WALL250","price":2718.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL250.jpg?v=1790813820"},{"product_id":"rbtec-rb-pds2z1000-two-zones-pds-kit-2x-1000-2000-long-with-processor-lpu-400c-analyzer","title":"RBtec RB-PDS2Z1000 Two Zones PDS Kit 2x 1000' (2000' Long) with Processor (LPU-400C Analyzer)","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS2Z1000 is a complete dual-zone PDS kit: two 1000-foot runs of alarmed-carrier cable (2000 feet total) with an LPU-400C analyzer processor monitoring both zones independently.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356595753063,"sku":"RB-PDS2Z1000","price":17678.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/shortpds-product-card-1024x948.jpg?v=1790813856"},{"product_id":"rbtec-rb-iroc2z250-dual-zone-kit-2x250-75m-500ft-150m-long-includes-ironclad-sensor-cable-analyzer-nema4x-enclosure","title":"RBtec RB-IROC2Z250 Dual Zone Kit, 2X250'\/75m (500ft\/150m long), Includes IRONCLAD Sensor Cable, Analyzer, NEMA4X Enclosure","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-IROC2Z250 is a complete dual-zone IRONCLAD kit: two 250-foot runs of armored sensor cable (500 feet total), an LPU analyzer processor covering both zones independently, and a NEMA 4X \/ IP-66 weatherproof enclosure.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356595785831,"sku":"RB-IROC2Z250","price":3576.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-IROC2Z250_lg.jpg?v=1790813857"},{"product_id":"rbtec-rb-wall1000-wallalert-outdoor-indoor-sensor-cable-without-end-of-line-1000-300m-roll","title":"RBtec RB-WALL1000 WallAlert Outdoor Indoor Sensor Cable without End-of-Line, 1000' (300m) Roll","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. This listing is a 1000-foot roll of WallAlert sensor cable without an end-of-line board, meant to be run in conduit against the protected surface and paired with an RBtec LPU analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356595818599,"sku":"RB-WALL1000","price":3790.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL1000.jpg?v=1790813857"},{"product_id":"rbtec-rb-mic1z1000-cable-tie-and-strap","title":"RBtec RB-MIC1Z1000 Cable Tie and Strap","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. The RB-MIC1Z1000 bundles 1000 feet of MicAlert sensor cable with an RBtec LPU analyzer processor and termination hardware to cover a single 1000-foot zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356595884135,"sku":"RB-MIC1Z1000","price":3610.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-MIC1Z100.jpg?v=1790813858"},{"product_id":"rbtec-rb-wall1z250-1-zone-wallalert-kit","title":"RBtec RB-WALL1Z250 1-Zone WallAlert Kit","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. The RB-WALL1Z250 is a complete single-zone WallAlert kit: 250 feet of sensor cable with an LPU analyzer processor and enclosure, sized to monitor one 250-foot zone of wall, vault, or safe surface.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356595916903,"sku":"RB-WALL1Z250","price":2718.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL1Z250.jpg?v=1790813858"},{"product_id":"rbtec-rb-pds2z500-dual-zone-pds-kit-2x500-processor-lpu-400c-analyzer","title":"RBtec RB-PDS2Z500 Dual Zone PDS Kit 2x500' Processor (LPU-400C Analyzer)","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS2Z500 is a complete dual-zone PDS kit: two 500-foot runs of alarmed-carrier cable (1000 feet total) with an LPU-400C analyzer processor monitoring both zones independently.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356595982439,"sku":"RB-PDS2Z500","price":10031.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-PDS2Z500.jpg?v=1790813859"},{"product_id":"rbtec-rb-jb402-weatherproof-enclosure-for-lpu-402-processing-unit-ip66-nema4x","title":"RBtec RB-JB402 Weatherproof Enclosure for LPU-402 Processing Unit, IP66 \/ NEMA4X","description":"\u003cp\u003eThe RB-JB402 is the weatherproof IP-66 \/ NEMA 4X junction-box enclosure built to house RBtec's LPU-402 analyzer processing unit in outdoor installations, protecting the board and its terminations from rain, dust, and temperature extremes on an IRONCLAD, MicAlert, or PDS zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356596015207,"sku":"RB-JB402","price":509.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBJB402.jpg?v=1790813859"},{"product_id":"rbtec-rb-pds100-pds-sensor-cable","title":"RBtec RB-PDS100 PDS Sensor Cable","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. This listing is a 100-foot roll of PDS alarmed-carrier sensor cable without a processor; pair it with an RBtec LPU-400 series analyzer to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598014055,"sku":"RB-PDS100","price":1068.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/shortpds-product-card-1024x948_0d405960-d4c6-4385-9690-9788588ef52d.jpg?v=1790813894"},{"product_id":"rbtec-rb-pds1000-protective-distribution-system-kit-with-lpu-304-analyzer-and-1000-sensor-cable-black","title":"RBtec RB-PDS1000 Protective Distribution System Kit with LPU-304 Analyzer and 1000' Sensor Cable, Black","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS1000 is a complete single-zone PDS kit in a black enclosure: 1000 feet of alarmed-carrier sensor cable with an LPU-304 analyzer processor, sized to monitor one conduit or cable-tray run up to 1000 feet.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598079591,"sku":"RB-PDS1000","price":10010.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/RBtech__22114.1702930752.png?v=1790813895"},{"product_id":"rbtec-rb-wall2z500-dual-zone-kit-2x-500","title":"RBtec RB-WALL2Z500 Dual Zone Kit, 2x 500'","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. The RB-WALL2Z500 is a complete dual-zone WallAlert kit: two 500-foot runs of sensor cable (1000 feet total) with an LPU analyzer processor monitoring both zones independently.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598145127,"sku":"RB-WALL2Z500","price":4009.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL2Z500.jpg?v=1790813895"},{"product_id":"rbtec-rb-wall1z500-1-zone-wallalert-kit-500-150m","title":"RBtec RB-WALL1Z500 1-Zone WallAlert Kit, 500'\/150m","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. The RB-WALL1Z500 is a complete single-zone WallAlert kit: 500 feet of sensor cable with an LPU analyzer processor and enclosure, sized to monitor one 500-foot zone of wall, vault, or safe surface.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598210663,"sku":"RB-WALL1Z500","price":3197.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL1Z500.jpg?v=1790813896"},{"product_id":"rbtec-rb-mic1000-outdoor-micalert-sensor-cable-no-end-of-line-roll-of-1000-300m","title":"RBtec RB-MIC1000 Outdoor MicAlert Sensor Cable, No-End of line, Roll of 1000'\/300m","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. This listing is a 1000-foot roll of MicAlert sensor cable without an end-of-line board; pair it with an RBtec LPU analyzer and termination hardware to complete a monitored zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598276199,"sku":"RB-MIC1000","price":3610.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBMIC1000.jpg?v=1790813896"},{"product_id":"rbtec-rb-mic2z1000-2-zone-micalert-kit-2000-600m","title":"RBtec RB-MIC2Z1000 2-Zone MicAlert Kit, 2000'\/600m","description":"\u003cp\u003eRBtec's MicAlert is a microphonic sensor cable built for rigid perimeter fencing — welded mesh, palisade, wrought iron, and aluminum — where it reads the vibration and noise signature of climbing, cutting, and forced-entry attempts. Three layers of filtering, including real-time threshold adjustment and wind rejection, keep weather noise from triggering false alarms, and the sensor connects to an RBtec LPU analyzer processor for dry-contact relay alarm output. The RB-MIC2Z1000 bundles two 1000-foot runs of MicAlert sensor cable (2000 feet total) with an LPU-304 analyzer processor covering two independent 1000-foot zones.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598308967,"sku":"RB-MIC2Z1000","price":6334.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-MIC2Z1000.jpg?v=1790813897"},{"product_id":"rbtec-rb-wireless-relay-wireless-bridge","title":"RBtec RB-WIRELESS Relay Wireless Bridge","description":"\u003cp\u003eThe RB-WIRELESS is a relay wireless bridge for RBtec's perimeter sensor systems, carrying the dry-contact alarm and tamper relay output from an IRONCLAD, MicAlert, WallAlert, or PDS LPU analyzer back to a receiver without running conduit or cable, for zones that are remote from or obstructed from the control panel.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356598407271,"sku":"RB-WIRELESS","price":1549.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/2270_LOGO_4e4959e9-251e-44fe-a928-69cd044538b5.jpg?v=1790813897"},{"product_id":"rbtec-rb-slidingkit-sliding-gate-ironclad-kit-retractable-non-sensitive-cord-reel-30-in-weatherproof-enclosure-with-junction-boxes","title":"RBtec RB-SLIDINGKIT Sliding Gate IRONCLAD Kit, Retractable Non Sensitive Cord Reel 30' in Weatherproof Enclosure with Junction Boxes","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-SLIDINGKIT is RBtec's IRONCLAD accessory for sliding or rolling gates: a non-sensitive, retractable 30-foot cord reel housed in a weatherproof enclosure with junction boxes, letting the sensor circuit cross a moving gate without breaking continuity or wearing through a fixed cable run.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600340583,"sku":"RB-SLIDINGKIT","price":1770.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-SLIDINGKI.jpg?v=1790813931"},{"product_id":"rbtec-rb-iroc1z500-single-zone-kit-500-150m-includes-ironclad-sensor-cable-analyzer-nema4x-enclosure","title":"RBtec RB-IROC1Z500 Single Zone Kit, 500' (150m), Includes IRONCLAD Sensor Cable, Analyzer, NEMA4X Enclosure","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-IROC1Z500 is a complete single-zone IRONCLAD kit: 500 feet of armored sensor cable, an LPU analyzer processor, and a NEMA 4X \/ IP-66 weatherproof enclosure, sized to cover one zone up to 500 feet of fence line.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600406119,"sku":"RB-IROC1Z500","price":3470.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-IROC1Z500.jpg?v=1790813932"},{"product_id":"rbtec-rb-rbps24-24v-dc-power-supply-unit-for-the-analyzer","title":"RBtec RB-RBPS24 24V DC Power Supply Unit for the Analyzer","description":"\u003cp\u003eThe RB-RBPS24 is a 24VDC regulated power supply unit sized for RBtec's LPU series analyzer processors, used to power an IRONCLAD, MicAlert, WallAlert, or PDS zone from mains power where a standalone or backup DC supply is needed instead of powering the analyzer from an existing alarm panel.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600438887,"sku":"RB-RBPS24","price":214.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/RBtech__75221.1702930680.png?v=1790813933"},{"product_id":"rbtec-rb-lpu400i2-lpu-400-series-2-zone-interface-board-only","title":"RBtec RB-LPU400I2 LPU-400 Series 2-Zone Interface Board Only","description":"\u003cp\u003eThe RB-LPU400I2 is the 2-zone interface board for RBtec's LPU-400 series analyzer, carrying the sensor-cable inputs and dry-contact relay outputs that connect a dual-zone IRONCLAD, MicAlert, WallAlert, or PDS zone to the main processing board and on to the alarm panel.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600537191,"sku":"RB-LPU400I2","price":308.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/2270_LOGO_ea8d13d0-ec73-412b-8d3f-2de711a67a2b.jpg?v=1790813933"},{"product_id":"rbtec-rb-iroc50-ironclad-sensor-cable-50-15m","title":"RBtec RB-IROC50 IRONCLAD Sensor Cable, 50' (15m)","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. This listing is a bare 50-foot spool of IRONCLAD armored sensor cable, factory-terminated for a single zone; an RBtec LPU analyzer and weatherproof enclosure are sold separately to complete the zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600569959,"sku":"RB-IROC50","price":235.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBIROC50.jpg?v=1790813933"},{"product_id":"rbtec-rb-wall1z1000-2-zone-wallalert-kit-1000-305m","title":"RBtec RB-WALL1Z1000 2-Zone WallAlert Kit, 1000' (305m)","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. The RB-WALL1Z1000 is a complete single-zone WallAlert kit: 1000 feet of sensor cable with an LPU analyzer processor and enclosure, sized to monitor one 1000-foot zone of wall, vault, or safe surface.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600635495,"sku":"RB-WALL1Z1000","price":3790.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBWALL1Z1.jpg?v=1790813934"},{"product_id":"rbtec-rb-wall2z1000-dual-zone-kit-2000","title":"RBtec RB-WALL2Z1000 Dual Zone Kit, 2000'","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. The RB-WALL2Z1000 is a complete dual-zone WallAlert kit: two 1000-foot runs of sensor cable (2000 feet total) with an LPU analyzer processor monitoring both zones independently.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356600701031,"sku":"RB-WALL2Z1000","price":6650.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL2Z100.jpg?v=1790813935"},{"product_id":"rbtec-rb-iroc250-ironclad-sensor-cable-250","title":"RBtec RB-IROC250 IRONCLAD Sensor Cable, 250'","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. This listing is a bare 250-foot spool of IRONCLAD armored sensor cable, factory-terminated for a single zone; an RBtec LPU analyzer and weatherproof enclosure are sold separately to complete the zone.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603388007,"sku":"RB-IROC250","price":979.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBIROC250.jpg?v=1790813970"},{"product_id":"rbtec-rb-iroc2z500-dual-zone-kit-2x500-500m-long-includes-ironclad-sensor-cable-analyzer-nema4x-enclosure","title":"RBtec RB-IROC2Z500 Dual Zone Kit, 2X500' (500m Long), Includes IRONCLAD Sensor Cable, Analyzer, NEMA4X Enclosure","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-IROC2Z500 is a complete dual-zone IRONCLAD kit: two 500-foot runs of armored sensor cable (1000 feet total), an LPU analyzer processor covering both zones independently, and a NEMA 4X \/ IP-66 weatherproof enclosure.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603519079,"sku":"RB-IROC2Z500","price":5015.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-IROC2Z500.jpg?v=1790813970"},{"product_id":"rbtec-rb-iroc1z250-single-zone-kit-250-75m-includes-ironclad-sensor-cable-analyzer-nema4x-enclosure","title":"RBtec RB-IROC1Z250 Single Zone Kit, 250' (75m), Includes IRONCLAD Sensor Cable, Analyzer, NEMA4X Enclosure","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-IROC1Z250 is a complete single-zone IRONCLAD kit: 250 feet of armored sensor cable, an LPU analyzer processor, and a NEMA 4X \/ IP-66 weatherproof enclosure, sized to cover one zone up to 250 feet of fence line.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603617383,"sku":"RB-IROC1Z250","price":2964.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-IROC1Z250.jpg?v=1790813970"},{"product_id":"rbtec-rb-wall2z250-2-zones-kit-wallalert-sensor-cable-2x-250-75m","title":"RBtec RB-WALL2Z250 2-Zones Kit WallAlert Sensor Cable 2x 250'\/75m","description":"\u003cp\u003eRBtec's WallAlert is a passive vibration-based intrusion sensor for solid structures — concrete, brick, block, drywall, and sheet-metal walls, vaults, safes, and warehouse shells. It is installed in conduit against the protected surface and reads the vibration signature of drilling, cutting, hammering, and chiseling while filtering out ambient building noise, reporting through dry-contact relay outputs to a standard alarm panel or DVR\/NVR. The RB-WALL2Z250 is a complete dual-zone WallAlert kit: two 250-foot runs of sensor cable (500 feet total) with an LPU analyzer processor monitoring both zones independently.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603715687,"sku":"RB-WALL2Z250","price":3293.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-WALL2Z250.jpg?v=1790813971"},{"product_id":"rbtec-rb-slidingkit50-sliding-gate-ironclad-kit-with-50-retractable-cord-reel","title":"RBtec RB-SLIDINGKIT50 Sliding Gate IRONCLAD Kit with 50' Retractable Cord Reel","description":"\u003cp\u003eRBtec's IRONCLAD is a vibration-sensitive armored sensor cable that mounts directly on chain-link, welded-mesh, or razor-wire fencing to detect cutting, climbing, and lifting attempts. Three stages of signal filtering, including wind rejection, separate the high-frequency vibration of a physical attack from weather noise, and the system connects to an existing alarm panel, VMS, or SCADA platform through dry-contact relay outputs with no special certification required. The RB-SLIDINGKIT50 is RBtec's IRONCLAD accessory for sliding or rolling gates: a non-sensitive, retractable 50-foot cord reel housed in a weatherproof enclosure with junction boxes, letting the sensor circuit cross a moving gate without breaking continuity or wearing through a fixed cable run.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603813991,"sku":"RB-SLIDINGKIT50","price":1986.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBSLIDING.jpg?v=1790813972"},{"product_id":"rbtec-rb-pds1z1000-single-zone-kit-1000","title":"RBtec RB-PDS1Z1000 Single Zone Kit, 1000'","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS1Z1000 is a complete single-zone PDS kit: 1000 feet of alarmed-carrier sensor cable with an LPU-400C analyzer processor, sized to monitor one conduit or cable-tray run up to 1000 feet.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603912295,"sku":"RB-PDS1Z1000","price":10010.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-RBPDS1Z10.jpg?v=1790813972"},{"product_id":"rbtec-rb-pds2zkit-complete-processor-kit-for-1-2","title":"RBtec RB-PDS2ZKIT Complete Processor Kit for 1\/2","description":"\u003cp\u003eRBtec's PDS (Protective Distribution System) is a copper alarmed-carrier sensor cable that monitors conduits and cable trays for drilling, tapping, and lifting, giving physical tamper detection for sensitive or classified network cabling under CNSSI 7003-style requirements. It operates as a standalone device with no software, server, or daily inspection required, and reports through independent dry-contact relay outputs per zone to any standard alarm panel, CCTV system, or SCADA platform. The RB-PDS2ZKIT is RBtec's PDS processor-only kit, configurable for one or two zones — an LPU-400 series analyzer and enclosure sold without sensor cable, for adding or replacing the processing hardware on an existing PDS cable run.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356603977831,"sku":"RB-PDS2ZKIT","price":5525.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/shortpds-product-card-1024x948_57a49ac5-dc5c-4d3a-a1d5-53e36516ab30.jpg?v=1790813972"},{"product_id":"rbtec-rb-lpu402-2-zone-completer-processor-board-assembly","title":"RBtec RB-LPU402 2-Zone Completer Processor Board Assembly","description":"\u003cp\u003eThe RB-LPU402 is a complete 2-zone processor board assembly for RBtec's LPU-400 series analyzer, combining the main and interface boards used to monitor two independent zones of IRONCLAD, MicAlert, WallAlert, or PDS sensor cable and relay alarms to a standard panel.\u003c\/p\u003e","brand":"RBtec","offers":[{"title":"Default Title","offer_id":50356605681767,"sku":"RB-LPU402","price":1995.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/files\/Q8-LPU402.jpg?v=1790813997"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/collections\/Q8-MIC2Z500.jpg?v=1790957456","url":"https:\/\/silarius.com\/collections\/rbtec.oembed?page=2","provider":"Silarius","version":"1.0","type":"link"}