{"title":"Amplifiers, Mixers \u0026 Receivers","description":"\u003cp\u003e\u003c\/p\u003e","products":[{"product_id":"yamaha-a-s501sl-integrated-amplifier-silver","title":"Yamaha A-S501SL Integrated Amplifier (Silver)","description":"\u003cp\u003eExpand your listening horizons with the silver A-S501 Integrated Amplifier from Yamaha. Featuring up to 100W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray\/DVD players. It offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there's also a terminal for connecting a subwoofer.\u003c\/p\u003e\n\u003cp\u003eTo reduce distortion and degradation and produce the cleanest possible sound, the A-S501 employs Pure Direct Mode. Activated via a button on the front of the unit, this mode causes input signals to bypass unused circuits and cuts off those circuits' power supply. To further ensure quality sound, the amplifier's continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume.\u003c\/p\u003e\n\u003cp\u003eThis Yamaha amplifier was built with energy efficiency in mind, and uses a power management system to switch itself to idle mode when not in use. The A-S501's internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.\u003c\/p\u003e\n\u003cp\u003ePure Direct Mode\u003c\/p\u003e\n\u003cp\u003eThe Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.\u003c\/p\u003e\n\u003cp\u003eContinuously Variable Loudness Control\u003c\/p\u003e\n\u003cp\u003eThe A-S501 features an analog loudness control on the front panel, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low- and high-frequency sounds, providing full tonal range at any volume level, compensating for the natural loss in the human ear of high and low frequencies at soft levels.\u003c\/p\u003e\n\u003cp\u003eDirect Symmetrical Design\u003c\/p\u003e\n\u003cp\u003eThis amplifier's left and right channels are organized in a straight, symmetrical layout for limiting distortion and increasing signal purity.\u003c\/p\u003e\n\u003cp\u003eAnti-Resonance Chassis\u003c\/p\u003e\n\u003cp\u003eThe base of the A-S501's chassis is reinforced with a solid center bar to increase rigidity support and vibration damping, which limits resonance.\u003c\/p\u003e\n\u003cp\u003eDual System Capable\u003c\/p\u003e\n\u003cp\u003eYou can connect two separate speaker systems in different rooms and switch between them or have them both play at the same time by switching the dial on the front of the unit.\u003c\/p\u003e\n\u003cp\u003ePhono MM Terminal\u003c\/p\u003e\n\u003cp\u003eYou can connect a turntable with an MM phono cartridge to play vinyl records, allowing you to enjoy records in addition to modern media sources.\u003c\/p\u003e\n\u003cp\u003eAuto Power Standby Function\u003c\/p\u003e\n\u003cp\u003eThis amplifier puts itself into standby mode when it detects that it hasn't been used in approximately 8 hours, minimizing power consumption.\u003c\/p\u003e\n\u003cp\u003eRemote Control\u003c\/p\u003e\n\u003cp\u003eControl your music from afar with the included remote, finished to match the design of the amplifier. The remote comes with batteries and can also be used to control a Yamaha CD player.\u003c\/p\u003e\n\u003cp\u003eConnection for Bluetooth Wireless Adapter\u003c\/p\u003e\n\u003cp\u003eWith the optional YBA-11 Bluetooth Wireless Adapter, you'll be able to stream music wirelessly from a Bluetooth capable mobile phone or a PC to the network receiver. This amplifier features a DC-out connection on the rear panel to power the adapter.\u003c\/p\u003e\n\u003cp\u003eRotary Encoder Input Selector\u003c\/p\u003e\n\u003cp\u003eThe rotary encoder makes it quick and easy to select input sources, and the LEDs clearly show which source is selected so you can easily switch between them, even in a dark room.\u003c\/p\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":31470696431719,"sku":"sil70728","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_00784d6187364a5892e95e91dd8eddae_mv2.jpg?v=1575054196"},{"product_id":"yamaha-a-s801bl-integrated-amplifier-black","title":"Yamaha A-S801BL Integrated Amplifier (Black)","description":"\u003cp\u003eExpand your listening horizons with the black A-S801 Integrated Amplifier from Yamaha. Featuring up to 120W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray\/DVD players. The A-S801 sports a USB input and a 32-bit ESS Sabre Premier Audio digital-to-analog converter for playing DSD and PCM files stored on your PC. This amplifier offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there's also a terminal for connecting a subwoofer.\u003c\/p\u003e\n\u003cp\u003eTo reduce distortion and degradation and produce the cleanest possible sound, the A-S801 employs Pure Direct mode and CD Direct mode. Activated via buttons on the front of the unit, these modes cause input signals to bypass unused circuits and cuts off those circuits' power supply. To further ensure quality sound, the amplifier's continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume.\u003c\/p\u003e\n\u003cp\u003eBuilt to be energy efficient, the amp uses a power management system to switch itself to idle mode when not in use. The A-S801's internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.\u003c\/p\u003e\n\u003cp\u003e32-Bit USB Digital-to-Analog Converter\u003c\/p\u003e\n\u003cp\u003eThe USB-connected ESS Sabre Premier Audio Digital-to-Analog Converter (DAC) supports native 32-bit PCM and DSD resolutions on Windows PCs (24-bit on Mac), allowing for a direct connection to computer-based high-resolution audio files. The USB device controller has its own master clock that eliminates PC jitter, and the USB driver is designed for low loss and high throughput. A 2-channel D\/A converter is housed inside the chip which applies a double differential operation. During playback, indicators on the front panel show which sampling frequencies are currently being used.\u003c\/p\u003e\n\u003cp\u003eDigital Audio Input\u003c\/p\u003e\n\u003cp\u003eThe A-S801 is equipped for digital audio inputs with an optical and digital coaxial input terminal. The optical is for receiving audio from a TV and the coaxial for receiving audio from a DVD\/Blu-ray player. These inputs eliminate the need for conversion from digital audio to analog out, thus maintaining signal quality.\u003c\/p\u003e\n\u003cp\u003eCD Direct Mode\u003c\/p\u003e\n\u003cp\u003eEngaged by a front panel switch, it matches CD signal levels so each stage produces less noise, resulting in improved signal-to-noise ratio and maintenance of the amp's total gain balance.\u003c\/p\u003e\n\u003cp\u003ePure Direct Mode\u003c\/p\u003e\n\u003cp\u003eThe Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.\u003c\/p\u003e\n\u003cp\u003eContinuously Variable Loudness Control\u003c\/p\u003e\n\u003cp\u003eThe A-S801 features an analog loudness control on the front panel which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low- and high-frequency sounds, providing full tonal range at any volume level, compensating for the natural loss in the human ear of high and low frequencies at soft levels.\u003c\/p\u003e\n\u003cp\u003eDirect Symmetrical Design\u003c\/p\u003e\n\u003cp\u003eThis amplifier's left and right channels are organized in a straight, symmetrical layout for limiting distortion and increasing signal purity.\u003c\/p\u003e\n\u003cp\u003eAnti-Resonance Chassis\u003c\/p\u003e\n\u003cp\u003eThe base of the A-S801's chassis is reinforced with a solid center bar to increase rigidity support and vibration damping, which limits resonance.\u003c\/p\u003e\n\u003cp\u003eDual System Capable\u003c\/p\u003e\n\u003cp\u003eYou can connect two separate speaker systems in different rooms and switch between them or have them both play at the same time by switching the dial on the front of the unit.\u003c\/p\u003e\n\u003cp\u003eGold-Plated Terminals\u003c\/p\u003e\n\u003cp\u003eThe A-S801 has gold-plated speaker and input terminals, which ensure a high quality connection and reduce signal loss.\u003c\/p\u003e\n\u003cp\u003ePhono MM Terminal\u003c\/p\u003e\n\u003cp\u003eYou can connect a turntable with an MM phono cartridge to play vinyl records, allowing you to enjoy records in addition to modern media sources.\u003c\/p\u003e\n\u003cp\u003eAuto Power Standby Function\u003c\/p\u003e\n\u003cp\u003eThis amplifier puts itself into standby mode when it detects that it hasn't been used in approximately 8 hours, minimizing power consumption.\u003c\/p\u003e\n\u003cp\u003eRemote Control\u003c\/p\u003e\n\u003cp\u003eControl your music from afar with the included remote, finished to match the design of the amplifier. The remote comes with batteries and can also be used to control a Yamaha CD player.\u003c\/p\u003e\n\u003cp\u003eConnection for Bluetooth Wireless Adapter\u003c\/p\u003e\n\u003cp\u003eWith the optional YBA-11 Bluetooth Wireless Adapter, you'll be able to stream music wirelessly from a Bluetooth capable mobile phone or a PC to the network receiver. This amplifier features a DC-out connection on the rear panel to power the adapter.\u003c\/p\u003e\n\u003cp\u003eRotary Encoder Input Selector\u003c\/p\u003e\n\u003cp\u003eThe rotary encoder makes it quick and easy to select input sources, and the LEDs clearly show which source is selected so you can easily switch between them, even in a dark room.\u003c\/p\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":31470697807975,"sku":"A-S801BL","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_5313798aa1014c2baec30c9054325d19_mv2.jpg?v=1575054216"},{"product_id":"yamaha-a-s501bl-integrated-amplifier-black","title":"Yamaha A-S501BL Integrated Amplifier (Black)","description":"\u003cp\u003eExpand your listening horizons with the black A-S501 Integrated Amplifier from Yamaha. Featuring up to 100W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray\/DVD players. It offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there's also a terminal for connecting a subwoofer.\u003c\/p\u003e\n\u003cp\u003eTo reduce distortion and degradation and produce the cleanest possible sound, the A-S501 employs Pure Direct Mode. Activated via a button on the front of the unit, this mode causes input signals to bypass unused circuits and cuts off those circuits' power supply. To further ensure quality sound, the amplifier's continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume.\u003c\/p\u003e\n\u003cp\u003eThis Yamaha amplifier was built with energy efficiency in mind, and uses a power management system to switch itself to idle mode when not in use. The A-S501's internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.\u003c\/p\u003e\n\u003cp\u003ePure Direct Mode\u003c\/p\u003e\n\u003cp\u003eThe Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.\u003c\/p\u003e\n\u003cp\u003eContinuously Variable Loudness Control\u003c\/p\u003e\n\u003cp\u003eThe A-S501 features an analog loudness control on the front panel, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low- and high-frequency sounds, providing full tonal range at any volume level, compensating for the natural loss in the human ear of high and low frequencies at soft levels.\u003c\/p\u003e\n\u003cp\u003eDirect Symmetrical Design\u003c\/p\u003e\n\u003cp\u003eThis amplifier's left and right channels are organized in a straight, symmetrical layout for limiting distortion and increasing signal purity.\u003c\/p\u003e\n\u003cp\u003eAnti-Resonance Chassis\u003c\/p\u003e\n\u003cp\u003eThe base of the A-S501's chassis is reinforced with a solid center bar to increase rigidity support and vibration damping, which limits resonance.\u003c\/p\u003e\n\u003cp\u003eDual System Capable\u003c\/p\u003e\n\u003cp\u003eYou can connect two separate speaker systems in different rooms and switch between them or have them both play at the same time by switching the dial on the front of the unit.\u003c\/p\u003e\n\u003cp\u003ePhono MM Terminal\u003c\/p\u003e\n\u003cp\u003eYou can connect a turntable with an MM phono cartridge to play vinyl records, allowing you to enjoy records in addition to modern media sources.\u003c\/p\u003e\n\u003cp\u003eAuto Power Standby Function\u003c\/p\u003e\n\u003cp\u003eThis amplifier puts itself into standby mode when it detects that it hasn't been used in approximately 8 hours, minimizing power consumption.\u003c\/p\u003e\n\u003cp\u003eRemote Control\u003c\/p\u003e\n\u003cp\u003eControl your music from afar with the included remote, finished to match the design of the amplifier. The remote comes with batteries and can also be used to control a Yamaha CD player.\u003c\/p\u003e\n\u003cp\u003eConnection for Bluetooth Wireless Adapter\u003c\/p\u003e\n\u003cp\u003eWith the optional YBA-11 Bluetooth Wireless Adapter, you'll be able to stream music wirelessly from a Bluetooth capable mobile phone or a PC to the network receiver. This amplifier features a DC-out connection on the rear panel to power the adapter.\u003c\/p\u003e\n\u003cp\u003eRotary Encoder Input Selector\u003c\/p\u003e\n\u003cp\u003eThe rotary encoder makes it quick and easy to select input sources, and the LEDs clearly show which source is selected so you can easily switch between them, even in a dark room.\u003c\/p\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":31470697873511,"sku":"A-S501BL","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_5313798aa1014c2baec30c9054325d19_mv2_9f5a0dac-f8ab-4145-bb79-8d92b4073e77.jpg?v=1575054220"},{"product_id":"yamaha-r-s202bl-stereo-receiver-with-bluetooth-black","title":"Yamaha R-S202BL Stereo Receiver with Bluetooth (Black)","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Stereo Receiver | 2 Channel x 100W\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eYamaha, the most trusted brand in home audio, adds Bluetooth® compatibility in this Hi-Fi receiver for easy wireless setup to streaming music services and music on smartphones or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha natural sound.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAdvanced circuitry design\u003cbr\u003eBluetooth\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003ecompatibility for popular streaming music services\u003cbr\u003e40 station FM\/AM preset tuning\u003cbr\u003eBrushed aluminum finish and simplistic design\u003cbr\u003eSpeaker selector for two systems\u003cbr\u003eSimple remote control layout\u003cbr\u003eHeadphone terminal\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eHigh-Power Output\u003c\/h2\u003e\n\u003cp\u003eNever peak. The R-S202, with two channels of 100 W high-power output* that are above its class, has a high-quality sound design that minimizes the length of signal routes and optimizes the circuit layout. Positioning the power transformer near the amp circuit reduces power loss while improving peak power supply capacity to enable high volume output. The signal ground and power supply ground connect at one point, eliminating mutual interference to achieve a higher S\/N ratio. The result is sound clarity stripped of noise and other signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-R-S202-BL-Bluetooth.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBluetooth\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eto Streaming Music Services\u003c\/h2\u003e\n\u003cp\u003eConnect wirelessly. The R-S202 provides Bluetooth functionality for enjoying streaming music from smart phones and other devices, selecting songs and hearing them with the legendary quality of Yamaha sound.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-R-S202-BL%20-Tuning.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003e40 Station AM\/FM Preset Tuning\u003c\/h2\u003e\n\u003cp\u003eAll the stations. Allow your client to register up to 40 favorite FM and AM stations, then conveniently select from either the receiver or the remote control. Auto preset lets them automatically search for and register FM stations. Frequencies appear on the display, so when they want to listen to a new station, they can quickly and easily dial it in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-R-S202-BL%20-simple-sophisticated.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eSimple and Sophisticated Design\u003c\/h2\u003e\n\u003cp\u003eLess is more. The R-S202 inherits the simple, sophisticated design style for which Yamaha Hi-Fi audio is famous. With an elegant brushed finish, it harmonizes beautifully with other audio equipment. The Yamaha commitment to beauty and sophistication are demonstrated in the finish and ease of control, giving the user a premium audio experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-R-S202-BL-speaker-selector.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eSpeaker Selector\u003c\/h2\u003e\n\u003cp\u003eCheck one, two. Equipped with speaker terminals for two systems, this receiver lets you connect two sets of speakers. The speaker selector makes it easy to switch between outputs, allowing you to deliver sound from one speaker system (A or B) or both (A+B). Try the Yamaha NS-6490 bookshelf speakers and the YST-SW216 powered subwoofer with the R-S202 for an ultimate stereo system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":31470705803367,"sku":"R-S202BL","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_466aaff733f6427d9cceda610dcb504e_mv2.jpg?v=1602982872"},{"product_id":"sony-str-dh590-5-2-channel-a-v-receiver","title":"Sony STR-DH590 5.2-Channel A\/V Receiver","description":"\u003cp\u003eEnjoy wireless audio streaming and 4K HDR video pass-through with the Sony STR-DH590 5.2-Channel A\/V Receiver. It features Bluetooth connectivity for wireless connection to compatible devices. It delivers up to 145W per channel at 6 Ohms for robust audio playback. D.C.A.C. sound optimization will help simplify your speaker setup and tailor the output to your listening area.\u003c\/p\u003e\n\u003cp\u003eThe STR-DH590 has four HDMI inputs and one HDMI output, all of which support 4K resolution, HDR, HDCP 2.2, and 3D. It also has a headphone jack for private listening. The GUI on-screen display will walk you through any settings you may want to change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee Clearly with High Dynamic Range (HDR)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith HDR pass-through support, you can enjoy the enhanced image contrast and brightness, shadow detail, and highlights with compatible content and devices. The HDR10, HLG, and Dolby Vision formats are supported.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHDMI Pass-Through\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 4K pass-through feature allows data to pass through the receiver without compromising image quality thanks to HDCP 2.2 compliance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible Surround Sound Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImmerse yourself in movie action with a 5.1-channel setup, or enjoy virtual surround with S-Force PRO Front Surround. DCAC (Digital Cinema Auto Calibration) automatically optimizes the sound based on where you sit in relation to your speakers to enhance sound quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Connectivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot only can you connect to the receiver with Bluetooth and play all your favorite tracks wirelessly, you can also turn the receiver on directly from your paired device.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe minimal front includes the Pure Direct button, which feeds sound directly to the receiver's amplifier, helping to preserve signal and clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBring It All Together\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the four HDMI, optical and digital coaxial, four analog audio inputs, and HDMI output, you can connect your display, Blu-ray player, gaming console, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Profile\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe STR-DH590 has a compact 5.25\" height for easy storage in a media unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReinforced Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe reinforced frame and beam chassis design help reduce external speaker sound pressure for ore focused, powerful sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Amplifier Engineered for Minimal Distortion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe power amplifier uses a glass-epoxy circuit board to help reduce vibration and distortion, providing clear, high power from each discreet amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDSD Decoding\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDeveloped for High-Resolution Audio, DSD features a sampling frequency 64x that of CD audio.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to Prevent Overheating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe heat sink is designed to maximize air intake, keeping the amplifier circuit cool to reduce distortion and increase reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal Framework\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe metal framework and heat sink bracket help shield the circuits from sound pressure and radiation for enhanced rigidity and clearer sound quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports High-Resolution Audio\u003c\/li\u003e\n\u003cli\u003eA\/V Sync (fixed)\u003c\/li\u003e\n\u003cli\u003eTV Volume Offset\u003c\/li\u003e\n\u003cli\u003eAuto standby\u003c\/li\u003e\n\u003cli\u003eGUI (graphic user interface)\u003c\/li\u003e\n\u003cli\u003eLarge-capacity power transformer for enhanced clarity\u003c\/li\u003e\n\u003cli\u003eFM station names, auto tuning, and direct tuning\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sony","offers":[{"title":"Default Title","offer_id":31470710784103,"sku":"STR-DH590","price":498.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_05f06867dd7c4cf3b178718c30f0b8a0_mv2.jpg?v=1575054656"},{"product_id":"jbl-csa2120-2-channel-installed-sound-power-amplifier","title":"JBL CSA2120 2-Channel Installed Sound Power Amplifier","description":"\u003cp\u003eThe CSA2120 2-Channel Installed Sound Power Amplifier from JBL features 120 watts of output per channel at 4 or 8 ohms and is designed for installed sound applications. Each of its two input channels has dual summing RCA inputs and a 3-pin detachable Euroblock input. Both channels also feature a selectable limiter and high-pass filter at 70Hz. The CSA2120 has a 4-pin Euroblock output connector for powering dual loudspeakers. The auto-standby mode disables the amplifier pulse width modulation generator when there is no signal detected.\u003c\/p\u003e \n\u003cp\u003eThe CSA2120 has both over-heat and low-voltage protection and can be rackmounted with the included rackmount kit. It has front-panel channel volume controls as well as clip, signal, and power LED indicators. The unit is powered by a switch-mode universal power supply.\u003c\/p\u003e \n\u003cp\u003ePlenum Rated\u003c\/p\u003e \n\u003cp\u003eThe CSA2120 is Plenum Rated UL2034 for fire-retardant operation\u003c\/p\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003eAudio\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eAudio Channels:\u003c\/td\u003e \n   \u003ctd\u003e2 \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eRMS Output Power:\u003c\/td\u003e \n   \u003ctd\u003e240 W \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003eBasic\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eAudio Channels:\u003c\/td\u003e \n   \u003ctd\u003e2 \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eBrand Name:\u003c\/td\u003e \n   \u003ctd\u003eJBL Commercial \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eMaximum Frequency Response:\u003c\/td\u003e \n   \u003ctd\u003e1 kHz \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eNumber of Analog Audio Inputs:\u003c\/td\u003e \n   \u003ctd\u003e4 \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eProduct Family:\u003c\/td\u003e \n   \u003ctd\u003eCS \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eProduct Type:\u003c\/td\u003e \n   \u003ctd\u003eAmplifier \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eRMS Output Power:\u003c\/td\u003e \n   \u003ctd\u003e240 W \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003eGeneral Information\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eBrand Name:\u003c\/td\u003e \n   \u003ctd\u003eJBL Commercial \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eManufacturer:\u003c\/td\u003e \n   \u003ctd\u003eHarman International Industries, Inc \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eManufacturer Part Number:\u003c\/td\u003e \n   \u003ctd\u003eNCSA2120R-U-US \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eManufacturer Website Address:\u003c\/td\u003e \n   \u003ctd\u003ehttp:\/\/www.harman.com\u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eProduct Model:\u003c\/td\u003e \n   \u003ctd\u003eCSA2120 \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eProduct Name:\u003c\/td\u003e \n   \u003ctd\u003eCSA2120 Amplifier \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eProduct Series:\u003c\/td\u003e \n   \u003ctd\u003eCS \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eProduct Type:\u003c\/td\u003e \n   \u003ctd\u003eAmplifier \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003eInterfaces\/Ports\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eNumber of Analog Audio Inputs:\u003c\/td\u003e \n   \u003ctd\u003e4 \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003eMiscellaneous\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eCountry of Origin:\u003c\/td\u003e \n   \u003ctd\u003eChina \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eEnvironmental Certification:\u003c\/td\u003e \n   \u003ctd\u003eWEEE \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eEnvironmentally Friendly:\u003c\/td\u003e \n   \u003ctd\u003eYes \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003ePackage Contents:\u003c\/td\u003e \n   \u003ctd\u003e \n    \u003cul\u003e \n     \u003cli\u003eCSA2120 Amplifier\u003c\/li\u003e \n     \u003cli\u003eRack mounting kit\u003c\/li\u003e \n    \u003c\/ul\u003e \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003ePhysical Characteristics\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eDepth:\u003c\/td\u003e \n   \u003ctd\u003e7\" \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eHeight:\u003c\/td\u003e \n   \u003ctd\u003e1.7\" \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eWeight (Approximate):\u003c\/td\u003e \n   \u003ctd\u003e2.90 lb \u003c\/td\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eWidth:\u003c\/td\u003e \n   \u003ctd\u003e8.2\" \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003ePower Description\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eOperating Power Consumption:\u003c\/td\u003e \n   \u003ctd\u003e50 W \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e \n\u003ctable\u003e \n \u003ctbody\u003e \n  \u003ctr\u003e \n   \u003cth\u003eTechnical Information\u003c\/th\u003e \n  \u003c\/tr\u003e \n  \u003ctr\u003e \n   \u003ctd\u003eMaximum Frequency Response:\u003c\/td\u003e \n   \u003ctd\u003e1 kHz \u003c\/td\u003e \n  \u003c\/tr\u003e \n \u003c\/tbody\u003e \n\u003c\/table\u003e","brand":"JBL By Harman","offers":[{"title":"Default Title","offer_id":31470984560743,"sku":"CSA2120","price":768.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_914e5323867a4654a0d59fe89b20f96e_mv2.jpg?v=1575059425"},{"product_id":"russound-3615-604034-source-speaker-switch","title":"Russound SDB-6.1 Dual Source Speaker Selectors with Volume Control for 6-Pairs","description":"\u003cdiv class=\"rowsection\"\u003e\n\u003ch3 class=\"item-headertop rd-prod-overview-hygiene\"\u003eProduct Overview\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clearfix\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"pd-overview-details pd-show-full-overview\" ng-class=\"vm.showFullOverview ? 'pd-show-full-overview' : 'pd-show-overview'\"\u003e\n\u003cdiv id=\"pdp_productoverview\" class=\"rd-hyg-etl-wrapper\" ng-bind-html=\"vm.product.properties['mkt_Info']||vm.product.properties['mkT_INFO']\" ng-if=\"!vm.isFr\"\u003e\n\u003cp\u003eThe SDB-6.1 is a highly efficient dual-source speaker selector that controls up to six pairs of speakers. The front panel provides a separate volume control for each speaker pair, allowing you to adjust the volume in each room from one convenient location. With two amplifier inputs, the SDB-6.1 allows you to choose either program in each room. Each zone also has an on\/off switch, which allows you to keep the volume control at a set level while turning the speakers on or off. The SDB-6.1 uses high-quality impedance-matching autoformers to maintain a safe operating load at the amplifier while distributing maximum power throughout your system. Designed for use with either 4- or 8-ohm speakers, the SDB-6.1 is equipped with internal jumpers to select the degree of impedance matching based on the impedance of your speakers and your amplifier's impedance requirements.\u003c\/p\u003e\n\u003cdiv class=\"item-header rd-hyg-item-header\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"rd-feature-bullets-non-etl\" ng-bind-html=\"vm.product.properties['featureBullets1to10']\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eDual amplifier inputs allow a choice of program in each room\u003c\/li\u003e\n\u003cli\u003eDetachable snap connectors are color coded for easy wire termination\u003c\/li\u003e\n\u003cli\u003eSelectable impedance matching accommodates 4- or 8-ohm speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row headername non-etl-overview\"\u003e\n\u003cdiv class=\"item-header\"\u003e\u003cstrong\u003eGeneral Information\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns rd-info-details\"\u003e\n\u003cstrong\u003eName:\u003c\/strong\u003e Russound SDB-6.1 Dual Source Speaker Selectors with Volume Control for 6-Pairs, Russound\/FMP, Inc, Russound\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns rd-info-details\"\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Russound, Residential AV, Residential Audio, Speaker Selectors\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns rd-info-details\"\u003e\n\u003cstrong\u003eUPC Code:\u003c\/strong\u003e 612934604034\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-12 columns rd-info-details\"\u003e\u003cspan ng-if=\"!vm.isCountry\"\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China. Country of origin is subject to change.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Russound","offers":[{"title":"Default Title","offer_id":31471197651047,"sku":"SDB-6.1","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_b9dc9a6026364779845639c659ec6356_mv2.jpg?v=1575061024"},{"product_id":"russound-3610603037-pro-12hp-dual-source-12-pair-speaker-selector","title":"Russound 3610603037 PRO-12HP Dual Source 12 Pair Speaker Selector","description":"\u003cp\u003eGeneral Information\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer: \u003c\/strong\u003e Russound\/FMP, Inc\u003cbr\u003e\u003cstrong\u003eManufacturer Part Number: \u003c\/strong\u003e 3610603037\u003cbr\u003e\u003cstrong\u003eManufacturer Website Address: \u003c\/strong\u003e www.russound.com \u003cbr\u003e\u003cstrong\u003eBrand Name: \u003c\/strong\u003e Russound\u003cbr\u003e\u003cstrong\u003eProduct Model: \u003c\/strong\u003e PRO-12HP\u003cbr\u003e\u003cstrong\u003eProduct Name: \u003c\/strong\u003e PRO-12HP Dual Source 12 Pair Speaker Selector\u003cbr\u003e\u003cstrong\u003eMarketing Information: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PRO-12HP is a highly efficient dual source, impedance-matching speaker selector. This high quality speaker selector is designed for use with either 4 or 8 ohm speakers. The A\/B switch located on the front panel allows all your speakers to be driven from either of two amplifiers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProduct Type: \u003c\/strong\u003e Speaker Selector\u003c\/p\u003e\n\u003cp\u003eProduct Information\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDevice Supported: \u003c\/strong\u003e Amplifier\u003cbr\u003e\u003cstrong\u003eDevice Supported: \u003c\/strong\u003e Speaker\u003c\/p\u003e\n\u003cp\u003ePhysical Characteristics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight: \u003c\/strong\u003e 2.9\"\u003cbr\u003e\u003cstrong\u003eWidth: \u003c\/strong\u003e 17\"\u003cbr\u003e\u003cstrong\u003eDepth: \u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eWeight (Approximate): \u003c\/strong\u003e 10 lb\u003c\/p\u003e\n\u003cp\u003eMiscellaneous\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual source inputs (AMP A and AMP B)\u003c\/li\u003e\n\u003cli\u003eA\/B selector switch\u003c\/li\u003e\n\u003cli\u003eSelectable auto-former based impedance matching (up to 12x)\u003c\/li\u003e\n\u003cli\u003eLow frequency protection circuit\u003c\/li\u003e\n\u003cli\u003eRemovable input\/output connectors\u003c\/li\u003e\n\u003cli\u003eIsolated left and right channel grounds\u003c\/li\u003e\n\u003cli\u003ePrinted room labels included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWarranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLimited Warranty: \u003c\/strong\u003e 10 Year\u003c\/p\u003e","brand":"Russound","offers":[{"title":"Default Title","offer_id":31471197683815,"sku":"3610603037","price":665.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_15cddb49354a463c878ef89fa772ee8e_mv2.jpg?v=1575061026"},{"product_id":"russound-3630-520679-ss-4-2-four-pair-single-source-speaker-selector","title":"Russound 3630-520679 SS-4.2 Four Pair Single Source Speaker Selector","description":"\u003cp\u003eGeneral Information\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer: \u003c\/strong\u003e Russound\/FMP, Inc\u003cbr\u003e\u003cstrong\u003eManufacturer Part Number: \u003c\/strong\u003e 3630-520679\u003cbr\u003e\u003cstrong\u003eManufacturer Website Address: \u003c\/strong\u003e www.russound.com \u003cbr\u003e\u003cstrong\u003eBrand Name: \u003c\/strong\u003e Russound\u003cbr\u003e\u003cstrong\u003eProduct Model: \u003c\/strong\u003e SS-4.2\u003cbr\u003e\u003cstrong\u003eProduct Name: \u003c\/strong\u003e SS-4.2 Four Pair Single Source Speaker Selector\u003cbr\u003e\u003cstrong\u003eMarketing Information: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRussound announces major upgrades to two of our most popular speaker selectors offering quality audio performance, overload protection and long-term reliability. The SS-6.2 and SS-4.2, which handle up to six and four pairs of loudspeakers respectively, provide impedance matching with automatic overload protection and are compatible for use with high power amplifiers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eProduct Type: \u003c\/strong\u003e Speaker Selector\u003c\/p\u003e\n\u003cp\u003eProduct Information\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDevice Supported: \u003c\/strong\u003e Amplifier\u003cbr\u003e\u003cstrong\u003eDevice Supported: \u003c\/strong\u003e Speaker\u003c\/p\u003e\n\u003cp\u003ePhysical Characteristics\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight: \u003c\/strong\u003e 1.9\"\u003cbr\u003e\u003cstrong\u003eWidth: \u003c\/strong\u003e 8.5\"\u003cbr\u003e\u003cstrong\u003eDepth: \u003c\/strong\u003e 6.3\"\u003cbr\u003e\u003cstrong\u003eWeight (Approximate): \u003c\/strong\u003e 2.75 lb\u003c\/p\u003e\n\u003cp\u003eMiscellaneous\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImpedance bypass switch for use with external impedance matching volume controls\u003c\/li\u003e\n\u003cli\u003eBuilt-in resettable fuses for circuit protection\u003c\/li\u003e\n\u003cli\u003eDesigned for quality audio performance and long-term reliability\u003c\/li\u003e\n\u003cli\u003eSpring-loaded speaker terminals accommodate up to 12 gauge wire\u003c\/li\u003e\n\u003cli\u003eIsolated inputs provide safe connection to bridge or floating type amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWarranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLimited Warranty: \u003c\/strong\u003e 10 Year\u003c\/p\u003e","brand":"Russound","offers":[{"title":"Default Title","offer_id":31471198044263,"sku":"3630-520679","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_f97c38582a8f4c30bfa00816b9e84b6c_mv2.jpg?v=1575061028"},{"product_id":"russound-1550-536342-6-source-6-zone-controller-amp","title":"Russound MCA-66 1550-536342 6 Source 6 Zone Controller Amp","description":"\u003cp\u003eOur new MCA-66 is a 6-source, 6 zone controller with a built-in 12-channel amplifier with up to 60 watts (stable to 4 ohms) of stereo power per zone. Each zone independently selects the source it wants to hear.\u003c\/p\u003e\n\u003ch2\u003eProduct highlights:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003emulti-zone controller and power amp for Russound multi-room audio systems\u003c\/li\u003e\n\u003cli\u003edistributes music from six sources to up to six listening areas in your home\u003c\/li\u003e\n\u003cli\u003eexpandable up to 36 zones with additional controller\/amplifiers\u003c\/li\u003e\n\u003cli\u003e6 RCA stereo inputs\u003c\/li\u003e\n\u003cli\u003e2 coaxial digital and 1 optical\/coaxial digital inputs\u003c\/li\u003e\n\u003cli\u003e6 pairs of speaker connectors\u003c\/li\u003e\n\u003cli\u003e20 watts RMS x 12 at 8 ohms\u003c\/li\u003e\n\u003cli\u003ezones 1 and 2 line-level outputs (fixed or variable)\u003c\/li\u003e\n\u003cli\u003esupports RS-232 and IP-control for integrating a third-party home automation system\u003c\/li\u003e\n\u003cli\u003esupports voice control via an\u003cspan\u003e \u003c\/span\u003eAmazon Alexa device\u003c\/li\u003e\n\u003cli\u003e6 RJ-45 ports for connecting optional in-wall keypads via category cable\u003c\/li\u003e\n\u003cli\u003e6 routed IR outputs and 1 common IR output\u003c\/li\u003e\n\u003cli\u003e12-volt trigger input and output\u003c\/li\u003e\n\u003cli\u003esupports Bluetooth® streaming with optional BTC-1X receiver\u003c\/li\u003e\n\u003cli\u003erack-mountable with (mounting ears included)\u003c\/li\u003e\n\u003cli\u003e17\"W x 3-3\/4\"H x 13-1\/2\"D\u003c\/li\u003e\n\u003cli\u003eweight: 19.2 lbs.\u003c\/li\u003e\n\u003cli\u003ewarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Russound","offers":[{"title":"Default Title","offer_id":31471199322215,"sku":"MCA-66","price":3072.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/g543MCA66-F.jpg?v=1620308564"},{"product_id":"jbl-csma-280-commercial-series-mixer-amplifier","title":"JBL CSMA 280 Commercial Series Mixer\/Amplifier","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ jMeay\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCSMA 240\/280\/2120\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe JBL® CSMA series of Mixer-Amplifiers are a professional tool with a sleek industrial look that is designed and built for commercial sound applications. Utilizing Crown's DriveCore technology enables significantly reduced size and weight - all mixer\/amps are highly efficient, fanless and just 1U rack space high. There are both single channel and two channel models with four or eight mixer channels, respectively.\u003c\/p\u003e\n\u003cp\u003eThe CSMA mixer\/amps offer unmatched ease of use, with a clean, front panel featuring only volume controls for each channel, master volume adjustment, adjustable bass and treble controls and a power switch. All the volume controls are surrounded by an illuminated ring, making them easy to see and operate in darkened environments. The amplifier can drive 8 ohm and 4 ohm loads and can be used with 70V and 100V distributed audio systems without the need for a separate transformer. In addition to balanced mic\/line inputs, unbalanced RCA inputs and speaker connections, all units include RJ45 connectors for use with JBL CSR-V in-wall volume controls. All models feature a universal power supply which enables the ability to accept AC voltages from 100 to 240 VAC, 50\/60Hz.\u003c\/p\u003e\n\u003cp\u003eJBL Commercial mixer\/amps are manufactured under HARMAN's GreenEdge™ environmental initiative, conforming to lead-free RoHS standards and utilizing recycled copper, aluminum and steel, an energy-saving powder coat finishing process and other environmentally-conscious manufacturing processes. Their highly efficient DriveCore design reduces power consumption and yields much more efficient operation - up to 80 percent more efficient than previous designs. All models carry a 3-year no-fault transferable warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003e8 inputs with 2 outputs of 40,80, 120-W of power\u003c\/li\u003e\n\u003cli\u003eIdeal for commercial and industrial use\u003c\/li\u003e\n\u003cli\u003eFanless, space-saving 1U design\u003c\/li\u003e\n\u003cli\u003eSleek industrial look with illuminated rings, making them easy to see and operate\u003c\/li\u003e\n\u003cli\u003eEuro-block type mic\/line input connectors and output connectors\u003c\/li\u003e\n\u003cli\u003eIndependent Bass and Treble controls for each output channel\u003c\/li\u003e\n\u003cli\u003eSupports 70V and 100V distributed audio systems without the need for a separate transformer\u003c\/li\u003e\n\u003cli\u003eRemote volume control capability using JBL CSR-V module and standard Ethernet cable\u003c\/li\u003e\n\u003cli\u003ePriority muting\u003c\/li\u003e\n\u003cli\u003eConfigurable output routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eGeneral Information\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ xSpuS\"\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eName:\u003cspan\u003e \u003c\/span\u003eJBL Professional CSMA 280 8-Input, 2-Output Commercial Mixer-Amplifier 80Wx1 at 70V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eCategory:\u003cspan\u003e \u003c\/span\u003eJBL Professional, Pro AV, Commercial Audio, Pro Amplifiers\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eUPC Code:\u003cspan\u003e \u003c\/span\u003e871015007373\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eCountry of Origin:\u003cspan\u003e \u003c\/span\u003eMexico. Country of origin is subject to change.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"JBL By Harman","offers":[{"title":"Default Title","offer_id":31471269970023,"sku":"CSMA 280","price":876.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_2662ad9c09ec4c2ba296ca5d37fe58c9_mv2.jpg?v=1575061930"},{"product_id":"jbl-csa-180z-audio-amplifier-1-x-80w","title":"JBL CSA 180Z Audio Amplifier (1 x 80W) CSA180Z","description":"\u003cp\u003eThe JBL CSA 180Z Audio Amplifier (1x 80W) provides a compact and powerful amplification solution for installed applications. The unit utilizes a universal switch-mode power supply and Crown's DriveCore technology to deliver reliable and efficient sound amplification.\u003c\/p\u003e \n\u003cp\u003eThe unit supports both 70 and 100V installations out of the box. It includes 1 x RJ45 connector for use with the company's CSR-V in-wall volume controls. Inputs are provided by mono sum RCA connectors and Euroblock. Outputs are provided by Euroblock connectors. Illuminated knobs provide visual feedback, and the universal power supply allows the amplifier to accept AC voltages from 100 to 240 VAC, 50\/60 Hz. The amp also fulfills HARMAN's GreenEdge environmental initiative.\u003c\/p\u003e","brand":"JBL By Harman","offers":[{"title":"Default Title","offer_id":31471270068327,"sku":"CSA180Z","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_22fd67c2529348caa8cef41bed421254_mv2.jpg?v=1575061933"},{"product_id":"jbl-csma-180-commercial-series-mixer-amplifier","title":"JBL CSMA 180 Commercial Series Mixer\/Amplifier","description":"\u003cdiv class=\"sc-bczRLJ bKBMTE\"\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ jMeay\"\u003e\n\u003cp\u003eThe JBL CSMA 180 can be your best friend if you need a compact, flexible sound system for your coffee shop, boutique or other business. Four input channels give you plenty of options for background music, with a priority channel for connecting a microphone for paging and announcements. With 80 watts of power in an amp that's stable from 4 to16 ohms, you'll have all the flexibility you need to build a dream system for your place of business. The CSMA 180 is even easy to operate when hidden away in a darkened cabinet, thanks to the illuminated rings around each dial on the front panel. The lights are signal-sensing, so each will glow green as soon as an input signal is detected. The mixer\/amplifier is also compatible with remote volume control (not included) via a single RJ-45 port on the back panel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003e4 inputs with 1 output of 80 or 120-W of power\u003c\/li\u003e\n\u003cli\u003eIdeal for commercial and industrial use\u003c\/li\u003e\n\u003cli\u003eFanless, space-saving 1U design\u003c\/li\u003e\n\u003cli\u003eSleek industrial look with illuminated rings, making them easy to see and operate\u003c\/li\u003e\n\u003cli\u003eEuro-block type mic\/line input connectors and output connectors\u003c\/li\u003e\n\u003cli\u003eIndependent Bass and Treble controls for each output channel\u003c\/li\u003e\n\u003cli\u003eSupports 70V and 100V distributed audio systems without the need for a separate transformer\u003c\/li\u003e\n\u003cli\u003eRemote volume control capability using JBL CSR-V module and standard Ethernet cable\u003c\/li\u003e\n\u003cli\u003ePriority muting\u003c\/li\u003e\n\u003cli\u003eConfigurable output routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eGeneral Information\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ xSpuS\"\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eName:\u003cspan\u003e \u003c\/span\u003eJBL Professional CSMA 180 4-Input, 1-Output Commercial Mixer-Amplifier 80Wx1 at 70V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eCategory:\u003cspan\u003e \u003c\/span\u003eJBL Professional, Pro AV, Commercial Audio, Pro Amplifiers\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eUPC Code:\u003cspan\u003e \u003c\/span\u003e871015007380\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eCountry of Origin:\u003cspan\u003e \u003c\/span\u003eMexico. Country of origin is subject to change.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"JBL By Harman","offers":[{"title":"Default Title","offer_id":31471270232167,"sku":"CSMA 180","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_6309726a994e4305b0b56cdfae4c2d86_mv2.jpg?v=1575061941"},{"product_id":"russound-4500-537127-wifi-streaming-zone-amplifier-1","title":"Russound MBX-AMP 4500-537127 WiFi Streaming Zone Amplifier","description":"\u003cp\u003eThe MBX-AMP Wi-Fi Streaming Zone Amplifier is designed to offer a simple-to-install and simple-to-configure streaming media solution to add high quality streaming audio anywhere in the home. Additionally, the advanced TV integration features enable the MBX-AMP to share speakers between your TV and your audio system easily without having to use any additional hardware or control system. Just use the included Infrared Sensor and quickly teach the MBX-AMP your remote control's volume and mute commands. It's that easy.\u003c\/p\u003e\u003cp\u003eThe MBX-AMP allows for expansion to up to 32 streaming rooms of audio in a single installation with any combination of other MBX-Series® streaming products from Russound. When paired with a Russound multi-room controller, system expansion is possible up to 8 independent audio sources and up to 48 total rooms of audio.\u003c\/p\u003e\u003cp\u003eIn addition to offering streaming audio from popular internet sources, the MBX-AMP also offers streaming of local UPnP™ compliant audio.\u003cbr\u003eIn addition, a built-in USB port allows users to connect an external flash drive or an externally-powered USB hard drive for use as additional music sources.\u003c\/p\u003e\u003cp\u003eConnect your TV's digital audio output to improve your TV's sound quality and to share your speakers with your premium audio system.\u003cbr\u003e\u003cbr\u003eExternal IR Sensor included to use the MBX-AMP with your current remote control for Volume\/Mute commands Builtin AirPlay streaming with full metadata to iOS\/Android apps or XTSPlus touchscreens\u003cbr\u003e\u003cbr\u003eBuilt-in Chromecast for Audio support with full metadata to iOS\/Android apps or XTSPlus touchscreens\u003cbr\u003e\u003cbr\u003eBluetooth Audio\u003cbr\u003e\u003cbr\u003eHi-Res audio streaming support up to 24-bit\/192 kHz\u003cbr\u003e\u003cbr\u003eUSB for Flash or external USB Hard drive-based music collections\u003cbr\u003e\u003cbr\u003eDigital (PCM) and Analog Stereo Inputs\u003cbr\u003e\u003cbr\u003eDigital or analog output\u003cbr\u003e\u003cbr\u003eControllable with the MyRussound App and fully compatible with the Russound XTSPlus in-wall touchscreen\u003cbr\u003e\u003cbr\u003eBass, Treble, and Loudness settings available through the MyRussound App\u003cbr\u003e\u003cbr\u003eSupports local favorites\u003cbr\u003e\u003cbr\u003eOnboard browser-based configuration, accessible from a smartphone or tablet\u003cbr\u003e\u003cbr\u003eMix and match with other MBX-Series® components for versatile system designs\u003c\/p\u003e","brand":"Russound","offers":[{"title":"Default Title","offer_id":32588000723047,"sku":"4500-537127","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/80f1ba_ad0bbf6c8b2f426bbe438744b8500f42_mv2_555ad6f3-0189-4735-a27d-7f2eec0c6201.jpg?v=1638106117"},{"product_id":"vanco-pa2x60-pulseaudio-2-channel-120w-class-d-amplifier","title":"Vanco PA2X60 PulseAudio 2 Channel 120W, Class D Amplifier","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003ch1 class=\"body heading\"\u003eVANCO® PulseAudio™ PA2X60 2 Channel, Class D Amplifier (60W)\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThe PA2X amplifier series from PulseAudio is an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The PA2X60 Class D Digital Amplifier operates at up to 60W, can be used in a stereo system, but can also be switched for use in bridged or mono applications.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003eVersatile Connectivity\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThe inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003ePulseAudio™ from VANCO®\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eWith more than 50 years in the electronics accessories industry, PulseAudio draws upon Vanco’s years of experience to design and manufacture innovative products. The launch of PulseAudio is of strategic importance as it evolves Vanco to carve out a position in the A\/V market, offering affordable, easy-to-integrate audio solutions for its professional channels. Both PulseAudio and Vanco’s customers will derive maximum benefit from an ongoing commitment to exceptional quality and customer support.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass D Digital Amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCA and 1\/8\" Stereo Inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixes audio when both inputs are connected and live\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStereo and Mono\/Bridge Modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatically goes into standby after 5 minutes of inactivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource Sensing to come out of standby when a connected source begins to play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC 115\/230V IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (RMS @ 8 Ohms):\u003c\/td\u003e\n\u003ctd\u003e60Wx2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (RMS @ 4 Ohms):\u003c\/td\u003e\n\u003ctd\u003e90Wx2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Output (RMS @ 8 Ohms):\u003c\/td\u003e\n\u003ctd\u003e180W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Harmonic Distortion (THD):\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1% (Rated Power: 60W @ 8 Ohms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise:\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;90 dB A WTD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response:\u003c\/td\u003e\n\u003ctd\u003e20Hz-20KHz +0\/- 2dB @ 8 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine Level Input Sensitivity:\u003c\/td\u003e\n\u003ctd\u003e700mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Protection:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Protection:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:\u003c\/td\u003e\n\u003ctd\u003e214mm x 250mm x 44mm (WxDxH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:\u003c\/td\u003e\n\u003ctd\u003e1.32kG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Contents:\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eBridgeable Amplifier\u003c\/li\u003e\n\u003cli\u003ePower Lead Cable\u003c\/li\u003e\n\u003cli\u003e1-4 Conductor Phoenix Connector (Screw down terminal)\u003c\/li\u003e\n\u003cli\u003eMounting Bracket and Screws\u003c\/li\u003e\n\u003cli\u003eProduct Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vanco","offers":[{"title":"Default Title","offer_id":32618936402023,"sku":"PA2X60","price":354.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/PUL1004.jpg?v=1593358898"},{"product_id":"pulseaudio™-pav140-40-watt-single-channel-amplifier","title":"PulseAudio™ PAV140 40 Watt Single Channel Amplifier","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003ch1 class=\"body heading\"\u003ePulseAudio™ PAV140 40 Watt Single Channel Amplifier\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eDestination amplification! The PulseAudio™ Single Channel Amplifier is compatible with 70V\/100V speakers and systems, includes (2) analog stereo audio inputs, and (1) digital audio input. Best of all it comes with all the mounting accessories needed.\u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003eFeatures\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThis Single Channel Amplifier is controllable via the front panel, IR or RS232. It is designed with (16) ID codes for addressing and controlling multiple units as well as 3-level microphone input with ducking functionality that supports condenser microphones, dynamic, and wireless. Add in a manual volume control and menu selection dial for easy access to volume, bass, treble, and mic levels and this device has it all!\u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003ePulseAudio™ from VANCO®\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eWith more than 50 years in the electronics accessories industry, PulseAudio draws upon Vanco’s years of experience to design and manufacture innovative products. The launch of PulseAudio is of strategic importance as it evolves Vanco to carve out a position in the A\/V market, offering affordable, easy-to-integrate audio solutions for its professional channels. Both PulseAudio and Vanco’s customers will derive maximum benefit from an ongoing commitment to exceptional quality and customer support.\u003c\/p\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts:\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel:\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolts:\u003c\/td\u003e\n\u003ctd\u003e70\/100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Panel Controls:\u003c\/td\u003e\n\u003ctd\u003eIR or RS232\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID Codes:\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs:\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs:\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Accessories:\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PulseAudio","offers":[{"title":"Default Title","offer_id":32618939842663,"sku":"PAV140","price":529.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/PUL1011.jpg?v=1593359031"},{"product_id":"vanco-pa2x125-pulseaudio-2-channel-250w-class-d-amplifier","title":"VANCO® PulseAudio™ PA2X125 2 Channel, Class D Amplifier (125W)","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003ch1 class=\"body heading\"\u003eVANCO® PulseAudio™ PA2X125 2 Channel, Class D Amplifier (125W)\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThe PA2X amplifier series from PulseAudio is an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The PA2X125 Class D Digital Amplifier operates at up to 125W, can be used in a stereo system, but can also be switched for use in bridged or mono applications.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003eVersatile Connectivity\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThe inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003ePulseAudio™ from VANCO®\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eWith more than 50 years in the electronics accessories industry, PulseAudio draws upon Vanco’s years of experience to design and manufacture innovative products. The launch of PulseAudio is of strategic importance as it evolves Vanco to carve out a position in the A\/V market, offering affordable, easy-to-integrate audio solutions for its professional channels. Both PulseAudio and Vanco’s customers will derive maximum benefit from an ongoing commitment to exceptional quality and customer support.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass D Digital Amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCA and 1\/8\" Stereo Inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixes audio when both inputs are connected and live\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStereo and Mono\/Bridge Modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatically goes into standby after 5 minutes of inactivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource Sensing to come out of standby when a connected source begins to play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC 115\/230V IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (RMS @ 8 Ohms):\u003c\/td\u003e\n\u003ctd\u003e125Wx2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (RMS @ 4 Ohms):\u003c\/td\u003e\n\u003ctd\u003e180Wx2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Output (RMS @ 8 Ohms):\u003c\/td\u003e\n\u003ctd\u003e360W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Harmonic Distortion (THD):\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1% (Rated Power: 125W @ 8 Ohms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise:\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;90 dB A WTD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response:\u003c\/td\u003e\n\u003ctd\u003e20Hz-20KHz +0\/- 2dB @ 8 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine Level Input Sensitivity:\u003c\/td\u003e\n\u003ctd\u003e700mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Protection:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Protection:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:\u003c\/td\u003e\n\u003ctd\u003e214mm x 250mm x 44mm (WxDxH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:\u003c\/td\u003e\n\u003ctd\u003e1.65kG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Contents:\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eBridgeable Amplifier\u003c\/li\u003e\n\u003cli\u003ePower Lead Cable\u003c\/li\u003e\n\u003cli\u003e1-4 Conductor Phoenix Connector (Screw down terminal)\u003c\/li\u003e\n\u003cli\u003eMounting Bracket and Screws\u003c\/li\u003e\n\u003cli\u003eProduct Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vanco","offers":[{"title":"Default Title","offer_id":32618964058215,"sku":"PA2X125","price":531.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/1578398464_IMG_1299647.jpg?v=1593360059"},{"product_id":"anco®-pulseaudio™-pa2x25-2-channel-class-d-amplifier-25w","title":"VANCO® PulseAudio™ PA2X25 2 Channel, Class D Amplifier (25W)","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003ch1 class=\"body heading\"\u003eVANCO® PulseAudio™ PA2X25 2 Channel, Class D Amplifier (25W)\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThe PA2X amplifier series from PulseAudio is an ideal solution for residential and commercial audio installations that require a simple setup and great sound output. With a small footprint, but high output, these Class D amplifiers can sit on a desktop, or can easily be mounted on a wall or within a rack using the included mounting brackets. The PA2X25 Class D Digital Amplifier operates at up to 25W, can be used in a stereo system, but can also be switched for use in bridged or mono applications.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003eVersatile Connectivity\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eThe inputs consist of two stereo audio inputs, two RCA inputs, and a single 3.5mm input for versatility. Also includes an auto-ON feature so the units do not need to be powered manually, just hit play and the amps will power on automatically! With a broad range of power output to pick from, the Pulse Audio PA2X amplifier series are a great solution for any desired application.\u003c\/p\u003e\n\u003cp class=\"body\"\u003e \u003c\/p\u003e\n\u003ch1 class=\"body heading\"\u003ePulseAudio™ from VANCO®\u003c\/h1\u003e\n\u003cp class=\"body\"\u003eWith more than 50 years in the electronics accessories industry, PulseAudio draws upon Vanco’s years of experience to design and manufacture innovative products. The launch of PulseAudio is of strategic importance as it evolves Vanco to carve out a position in the A\/V market, offering affordable, easy-to-integrate audio solutions for its professional channels. Both PulseAudio and Vanco’s customers will derive maximum benefit from an ongoing commitment to exceptional quality and customer support.\u003c\/p\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eClass D Digital Amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCA and 1\/8\" Stereo Inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixes audio when both inputs are connected and live\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStereo and Mono\/Bridge Modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatically goes into standby after 5 minutes of inactivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource Sensing to come out of standby when a connected source begins to play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC 115\/230V IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (RMS @ 8 Ω):\u003c\/td\u003e\n\u003ctd\u003e25Wx2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output (RMS @ 4 Ω):\u003c\/td\u003e\n\u003ctd\u003e45Wx2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBridge Output (RMS @ 8 Ω):\u003c\/td\u003e\n\u003ctd\u003e90W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Harmonic Distortion (THD):\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1% (Rated Power: 25W @ 8 Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal to Noise:\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;90 dB A WTD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response:\u003c\/td\u003e\n\u003ctd\u003e20Hz-20KHz +0\/- 2dB @ 8 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine Level Input Sensitivity:\u003c\/td\u003e\n\u003ctd\u003e700mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Protection:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Protection:\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:\u003c\/td\u003e\n\u003ctd\u003e143mm x 95mm x 45mm (WxDxH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:\u003c\/td\u003e\n\u003ctd\u003e0.6kG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Contents:\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eBridgeable Amplifier\u003c\/li\u003e\n\u003cli\u003ePower Lead Cable\u003c\/li\u003e\n\u003cli\u003e1-4 Conductor Phoenix Connector (Screw down terminal)\u003c\/li\u003e\n\u003cli\u003eMounting Bracket and Screws\u003c\/li\u003e\n\u003cli\u003eProduct Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vanco","offers":[{"title":"Default Title","offer_id":32618970480743,"sku":"PA2X25","price":159.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/1578398464_IMG_1299657.jpg?v=1593360421"},{"product_id":"bose-professional-719782-1410-freespace-iza-2120-hz-integrated-zone-amplifier","title":"Bose Professional 719782-1430 Freespace IZA 2120-Hz Amplifier - 120V\/NA","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Bose FreeSpace IZA 2120-HZ amplifier features selectable Loudspeaker EQ to enrich audio quality, Opti-voice paging for clear speech intelligibility while providing seamless transitions and Dynamic EQ that ensures full and balanced music at any volume level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIdeal for background\/foreground music and paging applications, Bose® FreeSpace® IZA 2120-HZ integrated zone amplifier elevates the audio experience when using FreeSpace® loudspeakers. Optimized for commercial applications, FreeSpace IZA amplifiers feature selectable Loudspeaker EQ to enrich audio quality, Opti-voice® paging for clear speech intelligibility while providing seamless transitions and Dynamic EQ that ensures full and balanced music at any volume level.\u003c\/p\u003e\n\u003cp\u003eBose FreeSpace Amplifiers - Premium commercial amplifiers designed to enhance audio installations using Bose FreeSpace loudspeakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRetail Stores\u003c\/li\u003e\n\u003cli\u003eRestaurants and Bars\u003c\/li\u003e\n\u003cli\u003eHospitality Venues\u003c\/li\u003e\n\u003cli\u003eConference Centers\u003c\/li\u003e\n\u003cli\u003eSchools\u003c\/li\u003e\n\u003cli\u003eAuxiliary Zones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue two-zone capability\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eprovides two independent outputs that each support volume\/source selection remotes, EQ, tone controls, and paging\/auxiliary routing options \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpti-voice® paging\u003c\/strong\u003e equalizes the vocal frequency range for clear speech intelligibility while providing seamless transitions \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic EQ\u003c\/strong\u003e ensures full and balanced music at any volume level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Loudspeaker EQ per outpu\u003c\/strong\u003et enriches audio quality and simplifies connection to Bose® loudspeakers: FreeSpace® 3 systems, FS3 subwoofer, DS 16, DS 40 and DS 100 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual remotes\u003c\/strong\u003e support optional volume\/source selection for independent, or combined, zone control which eliminates the need for bulky, inefficient, and sound-altering 70\/100V in-line volume controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion-ready connectivity\u003c\/strong\u003e with FreeSpace ZA amplifiers to drive additional zones \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable 2 x 120 W\u003c\/strong\u003e Class-D amplification optimized for 70\/100V high-impedance applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntuitive feature setup\u003c\/strong\u003e enables the amplifier to be configured without a PC for remote, paging, auxiliary input\/output and automatic standby options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Standby feature\u003c\/strong\u003e allows the amplifier to consume less power when not in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplified front panel interface\u003c\/strong\u003e provides end users with tone, source selection and master volume controls as well as a connection to mobile sources via a 3.5 mm connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote muting\u003c\/strong\u003e allows the amplifier to be muted via a centralized control system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"specification-table\" class=\"data-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"first odd\"\u003e\n\u003cth class=\"label\"\u003eAmplifier Power\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e2 x 120W @ 70\/100V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eFrequency Response\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e55 Hz - 20 kHz (+0\/–3 dB, @ 1 W reference 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eTHD+N\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e≤ 0.3 % (at rated power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eDynamic Range\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e88 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eCooling System\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eSingle fan, continuous left-to-right air flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e1.7\" (44 mm) x 19\" (483 mm) x 12.8\" (324 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eNet Weight\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e9 lbs (4.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"last even\"\u003e\n\u003cth class=\"label\"\u003eShipping Weight\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e12 lbs (5.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bose Professional","offers":[{"title":"Default Title","offer_id":32662657466471,"sku":"719782-1430","price":1328.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/1491480363_1329945.jpg?v=1594758226"},{"product_id":"bose-professional-controlspace-ex-1280c-conferencing-processor","title":"Bose Professional 772234-1110 ControlSpace EX-1280C Conferencing Processor","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv data-id=\"ProductTabs_tab0\" class=\"bose-tabContent__content\"\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cdiv class=\"bose-richText\"\u003e\n\u003ch3 font-family=\"Nunito Sans\" data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ jMeay\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA flexible DSP platform for scalable systems, ControlSpace EX conferencing processors have the features to support rooms of various sizes and the flexibility to meet future needs. With an open-architecture, all-in-one design, the ControlSpace EX-1280C offers signal processing for integrated-microphone audio conferencing applications. As the highest-capability processor of the ControlSpace EX family, the EX-1280C includes 12 mic\/line analog inputs, 8 analog outputs, 8 AmpLink digital outputs, 12 acoustic echo cancellers (AEC), and 64 x 64 Dante® connectivity. ControlSpace Designer software simplifies the setup process with drag-and-drop programming, making configuration quick and easy.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 font-family=\"Nunito Sans\" data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eAll-in-one design supports simultaneous VoIP, PSTN and USB so' codecs in a single 1RU model\u003c\/li\u003e\n\u003cli\u003e12 acoustic echo cancellers (AEC) route to both analog and Dante inputs; multiple references allow one EX-1280C processor to support multiple rooms or AEC-sharing across multiple processors\u003c\/li\u003e\n\u003cli\u003eAdaptable noise cancellation on each AEC channel; non-linear processing and comfort noise to enhance the clarity and intelligibility of meetings\u003c\/li\u003e\n\u003cli\u003e2-line VoIP with an internal web interface allowing IT personnel to configure VoIP parameters without design file access or integrator involvement\u003c\/li\u003e\n\u003cli\u003ePSTN connection (RJ-11) for worldwide POTS\/analog telephone systems\u003c\/li\u003e\n\u003cli\u003eUSB connection facilitates easy integration with PC soft codecs\u003c\/li\u003e\n\u003cli\u003eDante audio networking supports 64 x 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones\u003c\/li\u003e\n\u003cli\u003eBose AmpLink port provides 8-channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers\u003c\/li\u003e\n\u003cli\u003eFront-panel interface features large OLED display and rotary encoder for setting network parameters and monitoring channel activity\u003c\/li\u003e\n\u003cli\u003eGPIO (5 in\/5 out) for external connections including microphone pushbuttons or driving microphone LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 font-family=\"Nunito Sans\" data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\"\u003eGeneral Information\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ xSpuS\"\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eName:\u003cspan\u003e \u003c\/span\u003eBose Professional ControlSpace EX-1280C Conferencing Sound Processor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eCategory:\u003cspan\u003e \u003c\/span\u003eBose Professional, Pro AV, Commercial Audio, Pro Audio Processors\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eUPC Code:\u003cspan\u003e \u003c\/span\u003e017817752572\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eCountry of Origin:\u003cspan\u003e \u003c\/span\u003e. Country of origin is subject to change.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bose Professional","offers":[{"title":"Default Title","offer_id":32670717509735,"sku":"772234-1110","price":5607.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/ControlSpaceEX-1280C.png?v=1594999403"},{"product_id":"klipsch-kda-1000-4-channel-dsp-amplifier","title":"Klipsch KDA-1000 4 channel DSP Amplifier","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eFor outdoor systems requiring more output, the Klipsch KDA-1000 DSP Amplifier powers larger arrangements to deliver incredible performance from a 1000W, single-rack unit solution - all completely customizable through the web-based DSP menu.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1000W Total System Power (4 x 250W)\u003c\/li\u003e\n\u003cli\u003eHigh performance power platform\u003c\/li\u003e\n\u003cli\u003e70V \/ 100V \/ Low Impedance Compatibility\u003c\/li\u003e\n\u003cli\u003eFlexible I\/O\u003c\/li\u003e\n\u003cli\u003eState-of-the-art DSP control and set-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"100%\" cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv id=\"ProductDetail_ProductDetails_div\"\u003e\n\u003cdiv product-header=\"\"\u003e\n\u003cb\u003e\u003cinline\u003eKlipsch KDA-1000 4 channel DSP Amplifier\u003cbr\u003e\u003c\/inline\u003e\u003c\/b\u003e\u003cbr\u003e\u003cinline\u003e1000 watts, dsp control \u0026amp; setup, low impedance \u0026amp; 70v\/100v compatibility, 4x4 i\/o\u003c\/inline\u003e\u003cb\u003e\u003cinline\u003e\u003cbr\u003e\u003cbr\u003eProduct Highlights\u003cbr\u003e\u003c\/inline\u003e\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e1000W Total System Power (4 x 250W)\u003c\/li\u003e\n\u003cli\u003eHigh performance power platform\u003c\/li\u003e\n\u003cli\u003e70V \/ 100V \/ Low Impedance Compatibility\u003c\/li\u003e\n\u003cli\u003eFlexible I\/O\u003c\/li\u003e\n\u003cli\u003eState-of-the-art DSP control and set-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003ePart Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e120V: 1063258 230V: 1063261\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eAmplifier Type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh Efficiency Class G\/H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eAmplifier Power\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1000W Total System Power 4 x 250W Per Channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eInputs\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBalanced: 4 x Phoenix Line Level (up to 12 AWG wire) Unbalanced: 4 x RCA Line Level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eOutputs\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4 x Phoenix Speaker Level (up to 12 AWG wire) 4 x RCA Line Level (Throughs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eInput Sensitivity\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e750mV Balanced, 0dBU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eInput Impedance\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBalanced 40k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eTHD\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1% @ Rated Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eSignal-To-Noise\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-100dB Below Rated Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eEnclosure Type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFront Face: ABS Plastic Case: Machine Formed Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eRack Unit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1RU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eProduct Dimensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.73” x 19.02” x 14.29” (44mm x 483mm x 363mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eProduct Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e15 lbs (6.82 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"spec-label\"\u003e\u003cb\u003eMount Type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRemovable 1RU Rack Ears, Removable Rubber Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klipsch","offers":[{"title":"Default Title","offer_id":32712731099239,"sku":"KDA-1000","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/KDA-1000-2T.jpg?v=1596306221"},{"product_id":"klipsch-rsa-500-amp-black-brushed-aluminum","title":"Klipsch RSA-500 AMP Black Brushed Aluminum RSA-500-BL","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eWhile the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEQ switch for use with different subwoofers\u003c\/li\u003e\n\u003cli\u003eSelectable signal-sensing or voltage triggered auto-on\/off circuit\u003c\/li\u003e\n\u003cli\u003e300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms\u003c\/li\u003e\n\u003cli\u003eLine and speaker level inputs\u003c\/li\u003e\n\u003cli\u003eRack ears included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"descriptionAsTitle_18Nt9BkVcYQO2jcxURBPUl\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klipsch","offers":[{"title":"Default Title","offer_id":32712737259623,"sku":"RSA-500","price":1147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/RSA-500AMP-2.jpg?v=1596306527"},{"product_id":"honeywell-rk-zone24-zone-expander-with-single-audio-channel-mode-built-in-8-loudspeaker-line-selector-8-dry-contact-inputs-outputs","title":"Honeywell RK-ZONE24 Zone Expander With Single Audio Channel Mode, Built-In 8 Loudspeaker Line Selector, 8 Dry Contact Inputs\/Outputs","description":"\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ jMeay\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eGeneral The Honeywell INTEVIO Public Address (PA) system is the ideal solution for single buildings. Its integrated design provides better stability and cost savings, along with an enhanced user experience for improved performance. Description The RK-ZONE24 is a zone expansion device controlled by the Master Correct Unit, which adds 24 speaker zones and 24 contact inputs to the INTEVIO system. The RK-ZONE24 can connect with up to 6 external power amplifiers and 1 backup amplifier. The RK-ZONE24 supports only single channel mode. Functions Input\/output There are 24 dry contact inputs and a single line input is provided to connect with an external audio source. The RK-ZONE24 has 24 zones of 70V speaker outputs, which can connect up to 24 speaker circuits. An individual 24 VDC output is provided to power an external device. Automatic fault diagnosis The RK-ZONE24 has an automatic fault diagnosis function to supervise various types of faults, such as main power, backup power, CPU, power amplifier, speaker circuits, communication line, etc. Fault information is displayed on the LED indicators located on the front panel.Device operation (All Calls) even if the MCU is unavailable The external audio source connected to the line input can still be broadcast to all local zones if the controller CPU malfunctions or is unavailable. This feature can reduce system downtime due to CPU failure, and allow safety alert broadcasting during an emergency.\u003c\/span\u003e\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eExpands up to 24 zones for the INTEVIO system.\u003c\/li\u003e\n\u003cli\u003eFlexible Alifier backup mode: 1 backup Alifier can be used to back up all Alifiers on the system.\u003c\/li\u003e\n\u003cli\u003e500W output capacity for each zone.\u003c\/li\u003e\n\u003cli\u003eSupports one-for-all amplifier backup.\u003c\/li\u003e\n\u003cli\u003eAutomatic fault diagnosis.\u003c\/li\u003e\n\u003cli\u003eCan be used in standalone mode or if the controller CPU fails.\u003c\/li\u003e\n\u003cli\u003eSupports up to 24 speaker zones.\u003c\/li\u003e\n\u003cli\u003eSingle line input and 24 contact inputs.\u003c\/li\u003e\n\u003cli\u003e24 dry contact inputs without supervision.\u003c\/li\u003e\n\u003cli\u003eIndependent volume control for each audio channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\" font-family=\"Nunito Sans\"\u003eGeneral Information\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ xSpuS\"\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eName:\u003cspan\u003e \u003c\/span\u003eHoneywell Rk-Zone24 Zone Expander Module\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eCategory:\u003cspan\u003e \u003c\/span\u003eHoneywell Commercial Security, Pro AV, Commercial Audio, Pro Mass Notification, ADI Pro Rewards\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eUPC Code:\u003cspan\u003e \u003c\/span\u003e783008112882\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ kEeNDb\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\" data-test-selector=\"OverviewTitle\"\u003eCountry of Origin:\u003cspan\u003e \u003c\/span\u003eChina. Country of origin is subject to change.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e","brand":"Honeywell Commercial Security","offers":[{"title":"Default Title","offer_id":32723178553447,"sku":"RK-ZONE24","price":1119.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/RKZONE24-l.png?v=1596648389"},{"product_id":"honeywell-rk-amp500-high-efficiency-digital-power-amplifier-500w-rate-output-power-100v-70v-output","title":"Honeywell RK-AMP500 High Efficiency Digital Power Amplifier, 500W Rate Output Power, 100V\/70V output","description":"\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eGeneral\u003c\/b\u003e\u003cbr\u003eThe Honeywell INTEVIO Public Address (PA) system is the ideal solution for single buildings. Its integrated design provides better stability and cost savings, along with an enhanced user experience for improved performance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003cbr\u003eThe RK-AMP500 high-efficiency amplifier provides audio signal amplification for the INTEVIO PA system. It is reliable, efficient, and lightweight.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFunctions\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eInput\/output\u003c\/b\u003e\u003cbr\u003eThe RK-AMP500 supports balanced\/unbalanced audio inputs and 70 V speaker outputs. A contact output is provided to transmit the fault status to a third-party system when a fault is detected. The RK-AMP500 receives the audio and control signals via the RJ45 port on the RK-MCU controller or RK-ZONE8\/RK-ZONE24 zone expanders, and sends back the fault status.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAutomatic fault detection and self-protection\u003c\/b\u003e\u003cbr\u003eThe system can self-protect from overheat, overcurrent, overvoltage, undervoltage, overload, and short circuit. It can detect power supply errors during operation and a built-in fuse provides overcurrent protection to the main power supply. When a short circuit is detected on the main power circuit, the power is automatically shut down and backup power is enabled to replace the main power supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row headernametop hrnone\"\u003e\n\u003cdiv class=\"item-header\"\u003eMain Features\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003e500 W high-efficiency Class-D amplifier. Maximum 500 W rated output power.\u003c\/li\u003e\n\u003cli\u003eSupports 70V audio outputs.\u003c\/li\u003e\n\u003cli\u003e70V output support for increased flexibility.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eSupports balanced or unbalanced audio inputs.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eAutomatic fault detection, self-protection, and forced air cooling fan for enhanced reliability.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eForced air cooling.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eClass-D technology with high efficiency and low power consumption.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eAutomatically limits the output voltage.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eMaximum 500 W rated output power.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eSupports automatic protection and fault detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Honeywell Commercial Security","offers":[{"title":"Default Title","offer_id":32723182256231,"sku":"RK-AMP500","price":814.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/RKAMP500-l.png?v=1596648481"},{"product_id":"honeywell-rk-mcu-master-control-unit-built-in-8-loudspeaker-line-selector-500w-high-efficiency-class-d-power-amplifier","title":"Honeywell RK-MCU Master Control Unit, Built-In 8 Loudspeaker Line Selector, 500W High Efficiency Class-D Power Amplifier","description":"\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003eThe RK-MCU controller is the core unit of the INTEVIO PA system, providing audio storage, signal processing, routing, control, and supervision functions for the whole system. With a built-in 500 W Class-D amplifier, the single controller can operate as an 8-zone PA system. If more power and speaker zones are needed, it can be expanded by using the RK-AMP 500 external power amplifier and RK-ZONE8\/RK-ZONE24 zone expanders.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row headernametop hrnone\"\u003e\n\u003cdiv class=\"item-header\"\u003eMain Features\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eIntegrated public address system controller with built-in 500 W amplifier.\u003c\/li\u003e\n\u003cli\u003eMaximum 8 loudspeaker zones can be connected with a maximum power rating of 500 W for each speaker line.\u003c\/li\u003e\n\u003cli\u003e10 dry contact inputs with supervision and 8 dry contact outputs.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eNumerous user-friendly features to increase operational efficiency:plug and play, record and play, interaction between LCD an buttons, etc.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eBuilt-in 500 W Class-D power amplifier.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eSupports external power amplifiers.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eEquipment cost savings by implanting recorder, timer, audio monitor, and one-for-all backup amplifier solutions.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eSupports both single and dual channel mode\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003e2 auxiliary inputs and 1 MIC\/LINE input.\u003c\/li\u003e\n\u003cli class=\"mainfeatures-hide\"\u003eCapable of integration with third-party systems, such as fire alarm systems, through the dry contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Honeywell Commercial Security","offers":[{"title":"Default Title","offer_id":32723243532391,"sku":"RK-MCU","price":2699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/RKMCU-l.png?v=1596649921"},{"product_id":"honeywell-rk-zone8-zone-expander-with-single-or-dual-audio-channel-mode-built-in-8-loudspeaker-line-selector-8-dry-contact-inputs-outputs","title":"Honeywell RK-ZONE8 Zone Expander With Single or Dual Audio Channel Mode, Built-In 8 Loudspeaker Line Selector, 8 Dry Contact Inputs\/Outputs","description":"\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row hrnone\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe RK-ZONE8 Zone Expander, integrates 8 additional speaker lines while achieving a broader reach in new and retrofit applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports single and dual audio channels\u003c\/li\u003e\n\u003cli\u003eMaximum 8 zones can be connected, each zone has two speaker zones (A and B), of which maximum power rate is 500W\u003c\/li\u003e\n\u003cli\u003e8 dry contact inputs with supervision\u003c\/li\u003e\n\u003cli\u003e8 dry contact outputs\u003c\/li\u003e\n\u003cli\u003e4 external power amplifiers and 1 spare power amplifier can be connected\u003c\/li\u003e\n\u003cli\u003eFlexible amplifier redundancy function\u003c\/li\u003e\n\u003cli\u003eFull supervision, including main power supply, backup power supply, CPU fault, power amplifier, speaker lines, dry contact inputs and network fault, etc.\u003c\/li\u003e\n\u003cli\u003eSpeaker line supervision in both broadcasting and non-broadcasting mode\u003c\/li\u003e\n\u003cli\u003eThe volume of the signal to amplifiers can be set via RK-MCU\u003c\/li\u003e\n\u003cli\u003eSupports 3-wire and 4-wire volume controller\u003c\/li\u003e\n\u003cli\u003eSupports standalone mode and networking mode\u003c\/li\u003e\n\u003cli\u003e1 line input interface, which can be connected to external device when device is in standalone mode or the CPU of RK-MCU fails\u003c\/li\u003e\n\u003cli\u003eDC power output interface, through which to supply power for external modules, such as volume controller\u003c\/li\u003e\n\u003cli\u003eMaximum 15 RK-ZONE8 can be used\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row mainfeatures\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Honeywell Commercial Security","offers":[{"title":"Default Title","offer_id":32723258114151,"sku":"RK-ZONE8","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/RKZONE8-l.png?v=1596650258"},{"product_id":"kramer-vm-1110xl-balanced-audio-distribution-amplifier-1x10-mono-1x5-stereo-xlr-connectors-rackmountable","title":"Kramer VM-1110XL Balanced Audio Distribution Amplifier - 1x10 Mono, 1x5 Stereo, XLR Connectors, Rackmountable","description":"\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-8 col-xs-full-width col-xs-full-width\"\u003e\n\u003cdiv class=\"info-holder\" id=\"product_bullets_section\"\u003e\n\u003cp\u003eThe VM-1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. It can also be configured as a 1:5 distribution amplifier for stereo balanced audio signals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eLevel (Gain) Controls.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eDual Mode — Configure as 1:10 (mono) or 1:5 (stereo) DA.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eS\/N Ratio — 89.3dB.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eStandard 19” Rack Mount Size — 1U.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-detailsWrapper col-sm-4 col-md-3\"\u003e\n\u003cdiv class=\"product-details col-xs-12\"\u003e\u003cnav class=\"links col-xs-12\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ajax-holder\"\u003e\n\u003cdiv id=\"applications\" class=\"overview quote-section\"\u003e\n\u003csection class=\"container no-padding-top\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cheader class=\"heading\"\u003e\n\u003ch1\u003eAPPLICATIONS\u003c\/h1\u003e\n\u003c\/header\u003e\n\u003cdiv class=\"co-lg-12 col-md-12 col-sm-12 col-xs-full-width\"\u003e\n\u003cdiv class=\"info-holder\" id=\"product_bullets_section\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAudio duplication and production studios, delivering undiminished quality duplicates\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eRecording studios\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eBroadcast studios for on–line signal distribution\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eINPUTS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e2 balanced stereo audio, +4dBu\/50kΩ on XLR (F) connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eOUTPUTS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e10 balanced stereo audio, +4dBu\/50Ω on XLR (M) connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eMAX. OUTPUT LEVEL\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e23.8Vpp\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eBANDWIDTH (-3DB)\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u0026gt;100kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eS\/N RATIO\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e89.3dB\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eCROSSTALK\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e–78dB\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eCONTROLS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003eLevel (x2): — 0.7dB to +5.1dB, mode selector switches\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eCOUPLING\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003eAC (input)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003eDC (output)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eAUDIO THD + NOISE\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e0.081%\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eAUDIO 2ND HARMONIC\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e0.006%\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003ePOWER CONSUMPTION\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e230V AC, (115V AC USA), 6VA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3 noPaddingRight\"\u003e\n\u003ch2\u003eINCLUDED ACCESSORIES\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003ePower cord\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3\"\u003e\n\u003ch2\u003ePRODUCT DIMENSIONS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e19\" x 7.20 x 1U (43.6cm x 18.30cm x 4.36cm) W, D, H\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3\"\u003e\n\u003ch2\u003ePRODUCT WEIGHT\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e2.8kg (6.2lbs) approx.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3\"\u003e\n\u003ch2\u003eSHIPPING DIMENSIONS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e55.00cm x 27.60cm x 10.70cm (21.65\" x 10.87\" x 4.21\" ) W, D, H\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row borderBottom marginBottom15\"\u003e\n\u003cdiv class=\"col-sm-5 col-md-3\"\u003e\n\u003ch2\u003eSHIPPING WEIGHT\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7 col-md-8\"\u003e\u003cnav class=\"list-nav\"\u003e\n\u003cul\u003e\n\u003cli class=\" \"\u003e\u003cspan\u003e3.6kg (8.0lbs) approx.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kramer","offers":[{"title":"Default Title","offer_id":32747718344807,"sku":"VM-1110XL","price":624.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/vm-1110xl.jpg?v=1597363548"},{"product_id":"speco-technologies-pbm120a-public-address-amplifier-with-module-bay","title":"Speco Technologies PBM120A Public Address Amplifier with Module Bay","description":"\u003cdiv\u003e\n\u003cdiv data-selenium=\"overviewLongDescription\" class=\"\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003ePowering 120W into 70 or 25V commercial speakers—or 4, 8, and 16 Ohms systems—the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ePBM120A\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efrom\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eSpeco Technologies\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eis a public address amplifier and mixer designed for any situation in which music-on-hold (MOH) is a must. This amplifier features connective options for AM and FM antennas, as well as three pairs of RCA auxiliary channels, three balanced microphones, one RS-232 (for console control) and a terminal TEL input. In addition to its five 70 or 25V zones for commercial speakers and its 4\/8\/16 Ohm outputs, the PBM120A also gives you the option to route outgoing signal via RCA or XLR connections.\u003c\/p\u003e\n\u003cp\u003eTurn your attention to the front panel and you'll notice a panoply of controls. Note, for instance, the six zone selection buttons; with these, you can turn specific speaker runs on or off. The front panel is adorned with level controls over each input, as well as a master volume output, and an input selector for the auxiliary channel. Use this feature to choose between a sound-source plugged into the amplifier or any module you have racked into its outstanding free space (specific modules available separately).\u003c\/p\u003e\n\u003cp\u003eAdditionally, the PBM120A provides connection possibilities for telephone paging and music-on-hold applications, including a priority paging switch which mutes all other channels when signal is passing through the microphone 1 input. This unit includes an IR remote control and a set of rack-mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eNotable Features\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eModule bay\u003c\/li\u003e\n\u003cli\u003eIncludes IR remote and rack-mounting kit\u003c\/li\u003e\n\u003cli\u003e5 zoned 70 or 25V speaker outputs\u003c\/li\u003e\n\u003cli\u003eNon-zoned 4\/8\/16 Ohms output\u003c\/li\u003e\n\u003cli\u003eMaster digital volume control with display\u003c\/li\u003e\n\u003cli\u003eIndividual volume control for each input\u003c\/li\u003e\n\u003cli\u003eFront bass and treble controls\u003c\/li\u003e\n\u003cli\u003ePhantom power for all mic inputs\u003c\/li\u003e\n\u003cli\u003eMic 1 selectable for priority paging\u003c\/li\u003e\n\u003cli\u003eDigital front panel lock\u003c\/li\u003e\n\u003cli\u003eRCA or XLR line output\u003c\/li\u003e\n\u003cli\u003eTelephone paging input and music-on-hold output\u003c\/li\u003e\n\u003cli\u003eRS232 input for integration with popular control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Speco Technologies","offers":[{"title":"Default Title","offer_id":32890570113127,"sku":"PBM120A","price":782.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/1460713474_1246241.jpg?v=1601586720"},{"product_id":"sonance-patio-4-1-w-sr2-125-patio-4-1-outdoor-speaker-system-with-sr-2-125","title":"Sonance PATIO 4.1 W\/SR2-125 Patio 4.1 Outdoor Speaker System with SR 2-125","description":"\u003cp data-mce-fragment=\"1\"\u003eSonance Patio Series 4.1 Speaker System includes 4 satellite speakers and one in-ground subwoofer all powered from a single Sonance DSP amplifier.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-row-id=\"0\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWoofer (1 ea): \u003c\/strong\u003e8\" (203mm) dual voice coil, polypropylene cone \u0026amp; Santoprene™ surround\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSatellite Speaker (4 ea): \u003c\/strong\u003e3 1\/2\" (89mm) anodized aluminum cone \u0026amp; Santoprene™ surround\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFrequency Response: \u003c\/strong\u003e40Hz - 20kHz +\/- 3dB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eImpedance:\u003c\/strong\u003e 8 ohms per channel, nominal\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDispersion:\u003c\/strong\u003e 60º dispersion with an optimum listening area 8' - 10' (2.4-6.1 meters) from the satellite speakers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Handling:\u003c\/strong\u003e 50 Watts minimum; 150 Watts system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSensitivity:\u003c\/strong\u003e 85dB and 89dB SPL, satellite and subwoofer respectively, 2.83V \/ 1 meter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eEnclosure Material: \u003c\/strong\u003eNon-Corroding, high-heat ABS enclosures\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCrossover:\u003c\/strong\u003e 100Hz\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSatellite Speaker Dimensions:\u003c\/strong\u003e 6.75” L x 4.53” Dia. (184mm x 115mm) \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSubwoofer Dimensions:\u003c\/strong\u003e 21.4” L x 12.4” Dia. (544mm x 315mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShipping Weight:\u003c\/strong\u003e 75 lbs (34kg)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eIncluded Accessories:\u003c\/strong\u003e Four ground stakes, 12 silicone filled wire nuts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eAmplifier:\u003c\/strong\u003e Sonance DSP SR 2-125 Amplifier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sonance","offers":[{"title":"Default Title","offer_id":32892740993127,"sku":"SR2-125","price":2418.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/SONPATIO4.1WSR2-125_l.jpg?v=1601656833"},{"product_id":"yamaha-a-s1200sl-stereo-180w-integrated-amplifier-silver","title":"Yamaha A-S1200SL Stereo 180W Integrated Amplifier (Silver)","description":"\u003cdiv\u003e\n\u003cdiv data-selenium=\"overviewLongDescription\" class=\"\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eEnjoy enhanced stereo sound with your favorite pair of speakers and the silver\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eYamaha A-S1200 Stereo 180W Integrated Amplifier\u003c\/b\u003e. It outputs up to 90W per channel at 8 ohms and features a switchable MM\/MC phono input in addition to its five stereo RCA inputs. A 1\/4\" headphone jack with discrete amplification enables private listening. The A-S1200 includes a remote control as an added convenience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eToroidal Transformer\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe toroidal transformer in the A-S1200 is designed to provide technical proficiency and musicality. Combined with an array of audiophile-grade hi-fi features and components, this transformer helps ensure you get the musical emotion you expect.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eLevel Meters\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe level meters are both a nod to the nostalgic era of hi-fi and demonstrate the return of pure hi-fi for today's enthusiasts. Visually presenting the dynamics and pulse of the music, the level meters are designed to provide a warm feeling through their softly illuminated LEDs.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eOpen Sound Stage\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe open sound stage is engineered to provide a musical experience similar to being at a live performance.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eThick Ground Connection Wires\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe amplifier's low impedance design, aided by the thick ground wires, helps present an open, natural soundstage.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003ePure Brass Speaker Terminals\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eCut directly from pure brass, the speaker terminals are designed to comfortably fit in your hand for simple tightening to provide a secure connection.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eMechanical Ground Concept\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe A-S1200 adopts a Mechanical Ground Concept, with the bolts of the feet welded directly to the main chassis, and the large heat sink, power transformer, and block capacitors bolted directly to the chassis. This design helps avoid unwanted vibration to achieve expressive and rhythmic bass, presenting you with the groove of the music.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eChrome-Plated Iron Feet\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe chrome-plated iron feet help complete the rigid design of the amplifier.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32916737228903,"sku":"A-S1200SL","price":2998.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/1592314241_IMG_1375036.jpg?v=1602596112"},{"product_id":"yamaha-yac-xmv8280-d-pro-70v-8-ohm-dante-power-amplifier","title":"Yamaha XMV8280-D Pro 70V\/8-ohm Dante Power Amplifier","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro 70V\/8-ohm Power Amplifier with Dante\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eA multi-channel Class D power amplifier for fixed installation, background \/ foreground sound reinforcement applications requiring premium sound quality, flexible signal routing, monitoring and control capabilities. In addition to standard analog input \/ output configuration, the XMV4140-D power amplifier includes Dante® network audio protocols which uses a standard ethernet cable for signal routing, control and monitoring. With built-in Dante capabilities, adding an XMV4140-D power amplifier to any Dante network is quick and easy with minimal setup and configuration time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/power_amps\/xmv\/index.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eSimultaneous Low \u0026amp; High Impedance Operation\u003c\/h2\u003e\n\u003cp\u003eXMV power amplifiers can operate in both high-impedance (70V\/100V) or low-impedance (4Ω\/8Ω) modes simultaneously eliminating the need for additional equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eDouble Power Mode\u003c\/h2\u003e\n\u003cp\u003eDoubles the output power of selected channels for loudspeakers with higher output power capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eProtection Features\u003c\/h2\u003e\n\u003cp\u003ePowerful and intelligent protection functions like low load impedance, overcurrent and thermal protection assures long product life and consistent performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eFlexible Source Select\u003c\/h2\u003e\n\u003cp\u003eIndividual select input sources can be selected for each output channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eAudio Backup Mode\u003c\/h2\u003e\n\u003cp\u003eIf the incoming digital pilot tone is interrupted, MXV amps will automatically switch to the analog input ensuring audio is not interrupted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932418846823,"sku":"XMV8280-D","price":5774.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV8280-d_FRONT.jpg?v=1602977736"},{"product_id":"yamaha-yac-xmv8140-d-pro-70v-8-ohm-dante-power-amplifier","title":"Yamaha XMV8140-D Pro 70V\/8-ohm Dante Power Amplifier","description":"\u003cp\u003eYamaha XMV8140-D Power Amplifier for Larger Venues\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e XMV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 20000Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e A\/V Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 230-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 16.60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 14.29\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 19.92\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e XMV8140-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.43lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 10.87\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932421566567,"sku":"XMV8140-D","price":4145.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV8140-d_FRONT.jpg?v=1602977779"},{"product_id":"yamaha-yac-xmv4140-d-pro-70v-8-ohm-dante-power-amplifier","title":"Yamaha XMV4140-D Pro 70V\/8-ohm Dante Power Amplifier","description":"\u003cp\u003eYamaha XMV4140-D 4-Channel Power Amplifier, Class-D, Dante Model\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e XMV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 20000Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e A\/V Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 230-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 16.60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.50\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e XMV4140-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.90lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 18.90\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932421632103,"sku":"XMV4140-D","price":2538.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV4140-D_FRONT.jpg?v=1602977819"},{"product_id":"yamaha-yac-xmv4280-d-pro-70v-8-ohm-dante-power-amplifier","title":"Yamaha XMV4280-D Pro 70V\/8-ohm Dante Power Amplifier","description":"\u003cp\u003eYamaha XMV4280-D Power Amplifier for Larger Venues\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Series:\u003c\/strong\u003e XMV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 20000Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e A\/V Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 230-240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e ID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 16.60\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6.14\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9.69\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e XMV4280-D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.61lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.69\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932421697639,"sku":"XMV4280-D","price":2654.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV4280-D_FRONT.jpg?v=1602977849"},{"product_id":"yamaha-yac-exo8-pro-expander-for-mtx-mrx-8-channel","title":"Yamaha EXO8 Pro Expander for MTX\/MRX | 8 Channel","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro Input or Output Expander for MTX\/MRX | 8 Channel\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eEXI8 input expanders convert analog microphone\/line audio to digital and transmits the signal using the Yamaha YDIF format. The EXI8's preamps can be controlled remotely from\u003cspan\u003e \u003c\/span\u003eYamaha Pro Fixed Architecture DSP Processor (MTX)\/Yamaha Pro Dante Open Architecture DSP Processor (MRX)\u003cspan\u003e \u003c\/span\u003evia Ethernet cable. EXO8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX\/MRX series processors via YDIF.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/processors\/mtx\/lineup.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eLAN Monitoring Capabilities\u003c\/h2\u003e\n\u003cp\u003eNetwork monitoring from the Yamaha LAN Monitor software application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eSwitchable Sample Rates\u003c\/h2\u003e\n\u003cp\u003eSampling rates at 44.1kHz and 48kHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932441227367,"sku":"EXO8","price":1297.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/YAC-EXO8-1Z.jpg?v=1602980210"},{"product_id":"yamaha-yac-exi8-pro-expander-for-mtx-mrx-8-channel","title":"Yamaha EXI8 Pro Expander for MTX\/MRX | 8 Channel","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro Input or Output Expander for MTX\/MRX | 8 Channel\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eEXI8 input expanders convert analog microphone\/line audio to digital and transmits the signal using the Yamaha YDIF format. The EXI8's preamps can be controlled remotely from\u003cspan\u003e \u003c\/span\u003eYamaha Pro Fixed Architecture DSP Processor (MTX)\/Yamaha Pro Dante Open Architecture DSP Processor (MRX)\u003cspan\u003e \u003c\/span\u003evia Ethernet cable. EXO8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX\/MRX series processors via YDIF.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/processors\/mtx\/lineup.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eLAN Monitoring Capabilities\u003c\/h2\u003e\n\u003cp\u003eNetwork monitoring from the Yamaha LAN Monitor software application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eSwitchable Sample Rates\u003c\/h2\u003e\n\u003cp\u003eSampling rates at 44.1kHz and 48kHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932444405863,"sku":"EXI8","price":1417.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/YAC-EXI8-1Z.jpg?v=1602980479"},{"product_id":"yamaha-yac-pa2120-pro-power-amplifier-for-ma","title":"Yamaha PA2120 Pro Power Amplifier for MA","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eA perfect companion for the\u003cspan\u003e \u003c\/span\u003eYAC-MA2030A\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eYAC-MA2120, the Yamaha Pro Power Amplifier is a Lo-Z\/Hi-Z switchable Class-D power amplifier equipped with 1 stereo\/2 mono line inputs; can be combined with MA Series mixer-amplifiers to extend the system playback zone coverage. This amplifier features tunings optimized for Yamaha\u003cspan\u003e \u003c\/span\u003eVXC\/VXS\u003cspan\u003e \u003c\/span\u003eseries loudspeakers and is housed in a 1U design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Compatible mounting brackets:\u003cspan\u003e \u003c\/span\u003eYAC-RKH1\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/power_amps\/ma_pa\/index.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eIntuitive Design\u003c\/h2\u003e\n\u003cp\u003eEasy-to-use, intuitive operation designed for day-to-day use minimizing the possibility of end-user error.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eBuilt-in Loudspeaker Tunings\u003c\/h2\u003e\n\u003cp\u003eBuilt-in tunings provide optimal EQ settings for Yamaha VXS \u0026amp; VXC series loudspeakers; low \u0026amp; high pass filter settings for loudspeaker crossover use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eWall-mount Remote Control Options\u003c\/h2\u003e\n\u003cp\u003eRemote volume control and microphone on\/off switching via optional DCP control panels (DCP4V4S,\u003cspan\u003e \u003c\/span\u003eDCP1V4S,\u003cspan\u003e \u003c\/span\u003eDCP4S, max 2 units).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932444864615,"sku":"PA2120","price":745.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/PA2120_FRONTUP.jpg?v=1602980599"},{"product_id":"yamaha-yac-pa2030a-pro-power-amplifier-for-ma","title":"Yamaha YAC-PA2030A Pro Power Amplifier for MA","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eA perfect companion for the\u003cspan\u003e \u003c\/span\u003eYAC-MA2030A\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eYAC-MA2120, the Yamaha Pro Power Amplifier is a Lo-Z\/Hi-Z switchable Class-D power amplifier equipped with 1 stereo\/2 mono line inputs; can be combined with MA Series mixer-amplifiers to extend the system playback zone coverage. This amplifier features tunings optimized for Yamaha\u003cspan\u003e \u003c\/span\u003eVXC\/VXS\u003cspan\u003e \u003c\/span\u003eseries loudspeakers and is housed in a 1U design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Compatible mounting brackets:\u003cspan\u003e \u003c\/span\u003eYAC-RKH1\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/power_amps\/ma_pa\/index.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eIntuitive Design\u003c\/h2\u003e\n\u003cp\u003eEasy-to-use, intuitive operation designed for day-to-day use minimizing the possibility of end-user error.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eBuilt-in Loudspeaker Tunings\u003c\/h2\u003e\n\u003cp\u003eBuilt-in tunings provide optimal EQ settings for Yamaha VXS \u0026amp; VXC series loudspeakers; low \u0026amp; high pass filter settings for loudspeaker crossover use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eWall-mount Remote Control Options\u003c\/h2\u003e\n\u003cp\u003eRemote volume control and microphone on\/off switching via optional DCP control panels (DCP4V4S,\u003cspan\u003e \u003c\/span\u003eDCP1V4S,\u003cspan\u003e \u003c\/span\u003eDCP4S, max 2 units).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32932445093991,"sku":"YAC-PA2030A","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/PA2030A_FRONTUP.jpg?v=1602980706"},{"product_id":"yamaha-yac-dch8-pro-rs485-control-hub-for-dcp-wall-control-panels","title":"Yamaha YAC-DCH8 Pro RS485 Control Hub for DCP Wall Control Panels","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro RS485 Control Hub for DCP Wall Control Panels\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eDistribution hub for DCP Wall Controllers that features 9x RJ-45 ports for use with multiple DCP controllers\u003cspan\u003e \u003c\/span\u003e(DCP1V4S-US),\u003cspan\u003e \u003c\/span\u003e(DCP4S-US), and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.snapav.com\/shop\/en\/snapav\/yamaha-pro-digital-control-panel-for-mtx-ma-pa-4-rotaries-4-buttons-yac-dcp4v4s-us\"\u003e(DCP4V4S-US)\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/processors\/mtx\/lineup.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948117471335,"sku":"YAC-DCH8","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/DCH8_FRONTUP.jpg?v=1603649657"},{"product_id":"yamaha-yac-my4ad-pro-4-channel-line-level-analog-input-card","title":"Yamaha YAC-MY4AD Pro 4-Channel Line Level Analog Input Card","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro 4-Channel Line Level Analog Input Card\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eYamaha Pro 4-Channel Line Level Analog Input Card with four 24-bit analog inputs on XLR connectors. Works with any MY (Mini-YGDAI) compatible Yamaha product.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948119273575,"sku":"YAC-MY4AD","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/YAC-MY4AD-1Z.jpg?v=1603649827"},{"product_id":"yamaha-yac-rkh1-pro-rack-mount-kit-for-ma-pa2030","title":"Yamaha YAC-RKH1 Pro Rack Mount Kit for MA\/PA2030","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003e\n\u003cspan\u003eThis rack mount adapter kit lets you mount the \u003c\/span\u003eYamaha MA2030 mixer\/amplifier\u003cspan\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/www.snapav.com\/shop\/en\/snapav\/yamaha-pro-power-amplifier-for-ma-30w-x-2-channel-yac-pa2030a\"\u003ePA2030 amplifier\u003c\/a\u003e\u003cspan\u003e in a rack.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948121600103,"sku":"YAC-RKH1","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/RKH1-1Z.jpg?v=1603649923"},{"product_id":"yamaha-yac-mcp1-pro-wall-control-panel-for-mtx-processors-1","title":"Yamaha YAC-MCP1 Pro Wall Control Panel for MTX Processors","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro Wall Control Panel for MTX Processors\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eFree configuration control panel for\u003cspan\u003e \u003c\/span\u003eMTX\/MRX\u003cspan\u003e \u003c\/span\u003eprocessors. 6 buttons can be assigned to any functions via the MTX-MRX Editor with multi-language displays supported and 4 user levels for access management. Up to 16 units can be connected per system using standard Cat5e cabling and PoE power. A back can adapter is included.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/processors\/mtx\/lineup.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948132610151,"sku":"YAC-MCP1","price":598.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/MCP1_FRONT.jpg?v=1603650473"},{"product_id":"yamaha-yac-mtx5-d-pro-dante-fixed-architecture-dsp-processor-8x8","title":"Yamaha YAC-MTX5-D Pro Dante Fixed Architecture DSP Processor | 8x8","description":"\u003ch2\u003eYamaha Pro Dante Fixed Architecture DSP Processor | 8x8\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eThe Yamaha MTX5-D is a fixed architecture, Dante® enabled, matrix processor is a multi-zone, signal processor equipped with a DSP functions ideal for a wide variety of sound reinforcement applications for settings such as retail stores, restaurant\/bars, banquet rooms, institutional \/ educational and more. Responsible for the sound processing functions at the heart of an audio system, MTX5-D is housed in a 2U chassis and features both YDIF and Dante digital audio transfer protocols and enables customizable tunings and DSP functions design to make the overall audio system sound great, helping enhance the overall architectural setting. For the end-user, Yamaha provides a wide range of remote-control options including DCP wall mount controllers and a Wireless DCP option that can operate on the iOS or Android platforms. The fully customizable ProVisionaire Touch and ProVisionaire Control Apps for iOS tablets and Windows devices enable the creation of a variety of user interfaces for both simple operation or the most sophisticated control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eMatrix Mixer\u003c\/h2\u003e\n\u003cp\u003eMatrix mixer enables any input channel to be routed to any output for superior flexibility and reconfigurability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eMulti-Zone Output\u003c\/h2\u003e\n\u003cp\u003eMultiple output channels enable independent configuration and control of dozens of different zones.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003ePresets\u003c\/h2\u003e\n\u003cp\u003eUp to 50 configuration presets enables instant recall of settings for a variety of sound reinforcement applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eDynamics Control\u003c\/h2\u003e\n\u003cp\u003eConvenient DSP functions such as EQs, Feedback Suppression, Priority Ducking, Reverb, Delays, Gate, Ambient Noise Compensation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003ePresets\u003c\/h2\u003e\n\u003cp\u003eUp to 50 configuration presets enables instant recall of settings for a variety of sound reinforcement applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eOn-board .MP3 \u0026amp; .WAV Player\u003c\/h2\u003e\n\u003cp\u003eSD Card Slot for playback of MP3\/WAV files stored on an SD memory card.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eAMX\/Crestron Support\u003c\/h2\u003e\n\u003cp\u003eSupport for AMX\/Crestron controllers enable integration into larger system control platforms.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eDante Audio Network Capabilities\u003c\/h2\u003e\n\u003cp\u003eDante® digital audio network protocol offers easy system setups and configurations with longer network cable runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eYDIF Digital Audio Transfer\u003c\/h2\u003e\n\u003cp\u003eYamaha YDIF digital audio transfer protocol offers easy system setups and configurations saving time and money.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948168130663,"sku":"YAC-MTX5-D","price":3085.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/MTX5-D_FRONT.jpg?v=1603651407"},{"product_id":"yamaha-ya-xda-qs5400rk-musiccast-quad-streamer","title":"Yamaha YA-XDA-QS5400RK MusicCast Quad Streamer","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha MusicCast Quad Streamer\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eSpecially designed for custom integration of whole home audio systems, the \"QS\" (Quad Streamer) provides four zones of audio streaming and eight channels of high-performance audio amplification in an ultra-slim, 1U-high, rack-mountable enclosure. Expandable and extremely flexible, the QS works with the MusicCast multi-room audio system, allowing it to be linked with home theater AV receivers, sound bars and Hi-Fi gear in a wide variety of configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-Control-Integration.png\"\u003e\u003c\/div\u003e\n\u003ch2\u003eSeamless Integration\u003c\/h2\u003e\n\u003cp\u003eDesigned with the custom-install space in mind, Yamaha offers custom drivers for Control4 and other leading control systems for most of their product lineup. Plus, SnapAV will soon deliver the deepest third-party OvrC Pro integration to date, with enhanced diagnostic data on Yamaha products. And with Google Assistant and Alexa compatibility, integration has never been easier.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Integration.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eIngenious Integration\u003c\/h2\u003e\n\u003cp\u003eDesigned from the ground up for custom installation, the “QS” represents the ultimate integrated solution for filling every room with extraordinary sound.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Slim.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eSlim Yet Powerful\u003c\/h2\u003e\n\u003cp\u003eThe QS packs four rooms of audio streaming and eight channels of audiophile-grade amplification into a remarkably slim, 1U-high enclosure, allowing you to fully-optimize valuable rack real estate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Expands.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eExpands Easily\u003c\/h2\u003e\n\u003cp\u003eMultiple QS units can be used together to expand up to 32 zones with simultaneous playback of linked groups up to 20 zones each. In addition, the QS offers four zone pre outs that enable it to be combined with the Yamaha XDA-AMP5400RK, a companion multi-room amplifier, to provide more power or more speaker coverage for larger installs. The pre outs may also be used to connect powered subwoofers or subwoofer amps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-third-party.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003e3rd-Party Control\u003c\/h2\u003e\n\u003cp\u003eThe QS supports IP control by 3rd-party control systems used in many of today’s most advanced smart home integrations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-High-Res-Audio.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eHigh-Resolution Audio\u003c\/h2\u003e\n\u003cp\u003eGive your client every detail of their favorite recordings. The QS supports high-res audio playback up to 192 kHz\/24-bit, and employs the same premium ESS Sabre DACs (Digital-to-Analog Converters) and PML capacitors used in our flagship AVENTAGE AV receivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Versatile.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eVersatile Installation\u003c\/h2\u003e\n\u003cp\u003eMount it in a rack with the included ears or remove the ears for shelf installations. The included magnetic faceplate discourages tampering and provides the perfect cosmetic finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Custom-Friendly.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eCustom-Friendly Connectivity and Control\u003c\/h2\u003e\n\u003cp\u003eThe QS is truly made for custom integration, with Euroblock-style speaker connectors, dual RJ-45 Ethernet ports and a detachable AC cable for smart connectivity, and IP, IR and 12 V Trigger Out jacks for versatile control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-3-ways.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eThree Ways to Handle External Sources\u003c\/h2\u003e\n\u003cp\u003eIn addition to supporting external sources through linking with MusicCast receivers and sound bars, the QS offers an Aux input that can be selected for playback in any zone and a Cut-In input that automatically senses an input signal and temporarily overrides the selected source. This gives you flexibility to integrate media players, CD changers or even paging systems. Thru-Outs let you set up a bus to additional QS units.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Streaming.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eStream It All\u003c\/h2\u003e\n\u003cp\u003eGive your client access to all their favorite music, including built-in streaming services and music libraries on smartphones, tablets and networked-attached storage devices.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e*Streaming service availability varies by region.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Web-Control.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eWeb Setup\u003c\/h2\u003e\n\u003cp\u003eAccess Basic or Advanced settings via a Web Setup menu and store commonly-used profiles for faster configuration of future projects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Amplifiers\/YA-XDA-QS5400RK-Chime.jpg\"\u003e\u003c\/div\u003e\n\u003ch2\u003eUnique Chime Generator\u003c\/h2\u003e\n\u003cp\u003eThe Chime contact closure inputs let you integrate a doorbell chime or, for example, an alert for a gate from a common switch. Output zones and chime sound selection can be configured using the Web Setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948182122599,"sku":"YA-XDA-QS5400RK","price":3297.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/YA-XDA-QS5400RK-1Z.jpg?v=1603651980"},{"product_id":"yamaha-yac-xmv4280-pro-70v-8-ohm-power-amplifiers-4ch-280w","title":"Yamaha YAC-XMV4280 Pro 70V\/8-ohm Power Amplifiers - 4CH 280W","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro 70V\/8-ohm Power Amplifier\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eAn multi-channel Class D power amplifier for fixed installation, background \/ foreground sound reinforcement applications requiring premium sound quality, flexible signal routing, monitoring and control capabilities. In addition to standard analog input \/ output configuration, the XMV8280 power amplifier features the Yamaha YDIF digital audio transfer protocol which uses a standard ethernet cable for signal routing between YDIF enabled devices reducing setup time and configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/power_amps\/xmv\/index.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eSimultaneous Low \u0026amp; High Impedance Operation\u003c\/h2\u003e\n\u003cp\u003eXMV power amplifiers can operate in both high-impedance (70V\/100V) or low-impedance (4Ω\/8Ω) modes simultaneously eliminating the need for additional equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eDouble Power Mode\u003c\/h2\u003e\n\u003cp\u003eDoubles the output power of selected channels for loudspeakers with higher output power capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eProtection Features\u003c\/h2\u003e\n\u003cp\u003ePowerful and intelligent protection functions like low load impedance, overcurrent and thermal protection assures long product life and consistent performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eFlexible Source Select\u003c\/h2\u003e\n\u003cp\u003eIndividual select input sources can be selected for each output channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eAudio Backup Mode\u003c\/h2\u003e\n\u003cp\u003eIf the incoming digital pilot tone is interrupted, MXV amps will automatically switch to the analog input ensuring audio is not interrupted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948185366631,"sku":"YAC-XMV4280","price":2654.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV4280-D_FRONT_74688874-b1f1-4ed8-baf0-889c884ab1e8.jpg?v=1603652231"},{"product_id":"yamaha-yac-xmv8140-pro-70v-8-ohm-power-amplifiers","title":"Yamaha CMA3SB Pro 70V\/8-ohm Power Amplifiers 8CH 140W","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro 70V\/8-ohm Power Amplifier\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eAn multi-channel Class D power amplifier for fixed installation, background \/ foreground sound reinforcement applications requiring premium sound quality, flexible signal routing, monitoring and control capabilities. In addition to standard analog input \/ output configuration, the XMV8280 power amplifier features the Yamaha YDIF digital audio transfer protocol which uses a standard ethernet cable for signal routing between YDIF enabled devices reducing setup time and configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/power_amps\/xmv\/index.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eSimultaneous Low \u0026amp; High Impedance Operation\u003c\/h2\u003e\n\u003cp\u003eXMV power amplifiers can operate in both high-impedance (70V\/100V) or low-impedance (4Ω\/8Ω) modes simultaneously eliminating the need for additional equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eDouble Power Mode\u003c\/h2\u003e\n\u003cp\u003eDoubles the output power of selected channels for loudspeakers with higher output power capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eProtection Features\u003c\/h2\u003e\n\u003cp\u003ePowerful and intelligent protection functions like low load impedance, overcurrent and thermal protection assures long product life and consistent performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eFlexible Source Select\u003c\/h2\u003e\n\u003cp\u003eIndividual select input sources can be selected for each output channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eAudio Backup Mode\u003c\/h2\u003e\n\u003cp\u003eIf the incoming digital pilot tone is interrupted, MXV amps will automatically switch to the analog input ensuring audio is not interrupted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948186611815,"sku":"CMA3SB","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV8140-d_FRONT_ee5b2ca8-758d-4bce-9167-5e52c09cb321.jpg?v=1603652285"},{"product_id":"yamaha-yac-xmv8280-pro-70v-8-ohm-power-amplifiers-8ch-280w","title":"Yamaha XMV8280 Pro 70V\/8-ohm Power Amplifiers - 8CH 280W","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eYamaha Pro 70V\/8-ohm Power Amplifier\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eAn multi-channel Class D power amplifier for fixed installation, background \/ foreground sound reinforcement applications requiring premium sound quality, flexible signal routing, monitoring and control capabilities. In addition to standard analog input \/ output configuration, the XMV8280 power amplifier features the Yamaha YDIF digital audio transfer protocol which uses a standard ethernet cable for signal routing between YDIF enabled devices reducing setup time and configuration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span1\"\u003e\n\u003cdiv class=\"dynamic-image center\"\u003e\u003cimg alt=\"Document Icon\" src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Smart_Home\/icon_doc.png\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span11\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003cp\u003eFind additional information like\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/contents\/proaudio\/commercialinstalledsound\/example\/index.html\" target=\"_blank\"\u003eapplication diagrams\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/usa.yamaha.com\/products\/proaudio\/power_amps\/xmv\/index.html\" target=\"_blank\"\u003eproduct details\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon the Yamaha website.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eSimultaneous Low \u0026amp; High Impedance Operation\u003c\/h2\u003e\n\u003cp\u003eXMV power amplifiers can operate in both high-impedance (70V\/100V) or low-impedance (4Ω\/8Ω) modes simultaneously eliminating the need for additional equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eDouble Power Mode\u003c\/h2\u003e\n\u003cp\u003eDoubles the output power of selected channels for loudspeakers with higher output power capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eProtection Features\u003c\/h2\u003e\n\u003cp\u003ePowerful and intelligent protection functions like low load impedance, overcurrent and thermal protection assures long product life and consistent performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eFlexible Source Select\u003c\/h2\u003e\n\u003cp\u003eIndividual select input sources can be selected for each output channel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\n\u003ch2\u003eAudio Backup Mode\u003c\/h2\u003e\n\u003cp\u003eIf the incoming digital pilot tone is interrupted, MXV amps will automatically switch to the analog input ensuring audio is not interrupted.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003cdiv class=\"thumbnail-block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":32948187725927,"sku":"XMV8280","price":4774.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/XMV4280-D_FRONT_ddcbc35c-9f1d-459c-9659-19ba22c9f878.jpg?v=1603652363"},{"product_id":"atlona®-at-uhd-ex-70c-rx-4k-ultra-hd-hdbaset-receiver-230-ft","title":"Atlona® AT-UHD-EX-70C-RX 4K Ultra HD HDBaseT Receiver - 230 ft","description":"\u003cdiv\u003e\n\u003cdiv data-selenium=\"overviewLongDescription\" class=\"\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12 center-align\"\u003e\n\u003ch2\u003eAtlona® 4K Ultra HD HDBaseT Receiver - 230 ft\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"qv-data\"\u003eThe Atlona AT-UHD-EX-70C-RX is an HDBaseT™ receiver for AV signals up to 230 feet (70 meters) over category cable with RS-232 and IR control plus Power over Ethernet capability. It is compatible with video signals up to 4K UltraHD @ 60Hz with embedded multi-channel audio and remote 48V Power over Ethernet. The receiver works with the PRO3-UHD Matrix Switcher Series to provide bidirectional extension of both 12 volt IR and RS-232 commands. The AT-UHD-EX-70C-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for easy installation with rear panel I\/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Media_Distribution\/AtlonaLogoStrip.jpg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"notice-block\"\u003e\n\u003cspan class=\"title\"\u003eImportant Note\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"content\"\u003eThis product has a firmware update available. The update will only take a few minutes, but is highly recommended. Please visit\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/atlona.com\/product\/at-hdr-ex-70-2ps\/#tab-firmware\" target=\"_blank\"\u003eAtlona’s website\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor further details.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003e4K UltraHD Capability and HDCP 2.2 Compliant\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Ultra High Definition sources and displays\u003c\/li\u003e\n\u003cli\u003eFuture proofs AV systems in preparation for technology improvements, 4K UltraHD streaming services and playback devices\u003c\/li\u003e\n\u003cli\u003eAdheres to latest specification for High-bandwidth Content Protection\u003c\/li\u003e\n\u003cli\u003eAllows protected content stream to pass between devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eFront Panel Status LEDs with Bidirectional Extension\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLED indicators provide power and HDBaseT link status information\u003c\/li\u003e\n\u003cli\u003eProvides easy setup and troubleshooting\u003c\/li\u003e\n\u003cli\u003eControl signals travel over HDBaseT link for maximum control system flexibility\u003c\/li\u003e\n\u003cli\u003eEliminates multiple cable runs between source, control system, and display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eRemote-Powered Receiver\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndustry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT\u003c\/li\u003e\n\u003cli\u003eSaves time and integration costs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eLong Distance HDMI Extension\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReceives HDMI signals up to 230 ft (70m) @ 1080P and 130 ft (40m) @ 4K UltraHD using CAT6a\/7 cable\u003c\/li\u003e\n\u003cli\u003eUses easy-to-integrate category cable for low-cost, reliable system installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eFlexible Bidirectional IR Control Capabilities\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIR Input designed to work with 12V IR receivers for source control\u003c\/li\u003e\n\u003cli\u003eSaves control systems costs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eRear Panel I\/O Connectors\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlacement of ports on rear panel simplifies wire management\u003c\/li\u003e\n\u003cli\u003eSaves installation time and eliminates clutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eField Updatable Firmware\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront panel USB port provides an easy means for kit upgrades\u003c\/li\u003e\n\u003cli\u003eEnsures long term system return on investment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"dynamic-image\"\u003e\u003cimg src=\"https:\/\/www.snapav.com\/wcsstore\/ExtendedSitesCatalogAssetStore\/description\/images\/Media_Distribution\/AT-UHD-EX-70C-RX-application_Diagram.jpg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Atlona","offers":[{"title":"Default Title","offer_id":32952084955239,"sku":"AT-UHD-EX-70C-RX","price":406.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/AT-UHD-EX-70C-RX-Z1.jpg?v=1603822879"},{"product_id":"atlona®-at-ron-442-4k-hdr-hdmi-distribution-amplifier","title":"Atlona® AT-RON-442 4K HDR HDMI Distribution Amplifier","description":"\u003cdiv\u003e\n\u003cdiv data-selenium=\"overviewLongDescription\" class=\"\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eAtlona® 4K HDR HDMI Distribution Amplifier\u003c\/h2\u003e\n\u003cp\u003eThe Atlona Rondo™ is a 1×2, 1x4, or 1x8 HDMI distribution amplifier for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports signals up to 4K @ 60 Hz 4:4:4, as well as HDMI data rates up to 18 Gbps. The Rondo is ideal for applications requiring the latest as well as emerging 4K\/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in the HDMI 2.0a specification, plus the ability to pass metadata for HDR content. This Rondo Series HDMI distribution amplifier includes EDID management features, front panel LED indicators for power and signal status, and the capability to cascade several units without compromising performance. The Rondo is designed to deliver dependable, pristine-quality image presentations in both commercial and residential applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eHDMI Distribution Amplifier\u003c\/h2\u003e\n\u003cp\u003eThis distribution amplifier delivers high performance via reliable HDMI signal distribution. It’s easy to install and deploy in commercial and residential applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003e4K UHD \u0026amp; HDR Capability\u003c\/h2\u003e\n\u003cp\u003eCompatibility with new and emerging 4K\/UHD and HDR-capable sources and displays, this amplifier fully supports video resolutions, audio formats, and color space formats in the HDMI 2.0a specification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eHDCP 2.2 Compliant\u003c\/h2\u003e\n\u003cp\u003eAll Rondo Series amplifiers also adhere to the latest specification for High-bandwidth Digital Content Protection, allowing protected content stream to pass between devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eEDID Management\u003c\/h2\u003e\n\u003cp\u003eThis amplifier manages EDID communications with the source through a display’s EDID or internally stored EDID, and also ensures desired audio formats and video resolutions are provided to the AV system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eSupports Cascading – Up To 8 Units\u003c\/h2\u003e\n\u003cp\u003eCombine multiple Rondo Series distribution amplifiers without compromising performance or reliability. Your system designs and configurations can easily be adapted or modified as needed, depending on the job.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eMulti-Channel Audio Compliant\u003c\/h2\u003e\n\u003cp\u003eUse any multi-channel audio stream within a residential or professional audio system. This amplifier supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, and DTS-HD Master Audio™.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Atlona","offers":[{"title":"Default Title","offer_id":32952096129127,"sku":"AT-RON-442","price":320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/AT-RON-442-Z_4ef40dfd-13f2-42db-a721-15b448dd5ccc.jpg?v=1608235787"},{"product_id":"atlona®-at-hdr-ex-70-2ps-4k-hdr-transmitter-receiver-set","title":"Atlona® AT-HDR-EX-70-2PS 4K HDR Transmitter \u0026 Receiver Set","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span12\"\u003e\n\u003ch2\u003eAtlona® 4K HDR Transmitter \u0026amp; Receiver Set\u003c\/h2\u003e\n\u003cp\u003eA cost-effective solution, this 4K HDR transmitter and receiver set is ideal for applications using emerging or current 4K Ultra HD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in the HDMI 2.0b specification, plus it can pass metadata for HDR content.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eTest HDBaseT Link Status\u003c\/h2\u003e\n\u003cp\u003eAtlona’s free software utility allows you to test the integrity of the HDBaseT cable link between the transmitter and the receiver, so you can get real-time link status, plus detailed HDBaseT and HDMI signal information. This utility can also help you troubleshoot an RJ-45 termination or verify twisted pair cable quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eHDBaseT Extension\u003c\/h2\u003e\n\u003cp\u003eUsing a CAT6a\/7 cable, this kit extends HDMI @ 1080p up to 230 feet and 4K HDR at up to 130 feet (40 meters) for a low-cost, reliable system installation. Refer to specifications for additional category cable transmission distances.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eMulti-Channel Audio Compliant\u003c\/h2\u003e\n\u003cp\u003eThis kit supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X®.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span6\"\u003e\n\u003ch2\u003eVisually Lossless Compression\u003c\/h2\u003e\n\u003cp\u003eEnjoy an innovative signal extension solution with no latency. This kit enables HDBaseT transmission of HDMI up to 18 Gbps using extremely light video compression, and delivers pristine image quality for any application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Atlona","offers":[{"title":"Default Title","offer_id":32952097833063,"sku":"AT-HDR-EX-70-2PS","price":428.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/products\/AT-HDR-EX-70-2PS-1Z.jpg?v=1603823323"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0254\/7564\/5543\/collections\/1524585083_1401438.jpg?v=1606070712","url":"https:\/\/silarius.com\/collections\/amplifiers-mixers-selectors.oembed?page=27","provider":"Silarius","version":"1.0","type":"link"}